Er3+:NaY(Wo.9Moo.1O4)2晶体的生长及光谱性能

采用提拉法(CZ法),生长出质量良好的Er3+:NaY(W0.9Mo0.1O4)2晶体.通过X射线粉末衍射,红外光谱分析,并与NaY(WO4)2相比较,得到Er3+:NaY(W0.9Mo0.1O4)2晶体的结构与NYW类似,仍为四方晶系的白钨矿结构,I4(1)/α空间群.测定了晶体的实际组成,得到晶体中各元素均按理论值进行掺杂,计算了掺杂离子的分凝系数约为1.15.在光谱性质上,测试了晶体的吸收光谱,及晶体在50～1000cm-1波数范围内的拉曼光谱,并计算了各吸收峰的半峰宽及吸收系数A.     

新版《高分子化学》解读

旨在剖析祖仁教授主编的《高分子化学》第四版的教学思想和撰写特点,涉及章节、内容的选择和安排、逻辑思维和教学方法,以及一些技术术语等。同时也指出了新版教材的一些印刷错误等。     

Tailoring Pore Structure and Morphologies in Covalent Organic Frameworks for Xe/Kr Capture and Separation

As a rising star among porous solid materials, covalent organic frameworks(COFs) with excellent properties including but not limit to facilely controllable structure, high porosity, and multi-chemical functionality represent significant potential for efficient ¹²⁷Xe/⁸⁵Kr capture and separation. In this study, through tuning the length of the organic ligands, two-dimensional(2D) COF mate-rials with identical connection group but different pore properties, denoted as ATFG-COF and TpPa-COF with AA-stacking model and TpBD-COF with AB-stacking model were synthesized and tested for Kr and Xe adsorption for the first time. Adsorption measurements indicate that the narrower pore apertures and higher porosity are conducive for COF materials to capture Xe and Kr. Furthermore, the Henry's constant, isosteric heat of adsorption(Q_st), and ideal adsorbed solution theory(IAST) selectivity of ATFG-COF, the pore size of which is closest to the kinetic diameter of the Xe atom(0.41 nm) among 2D COF materials, were carried out based on the single component sorption isotherms. The results illustrate that the high isosteric heat values of Xe/Kr adsorption on ATFG-COF are 25 and 16 kJ/mol at room temperature, respectively. Henry's law predicts that the selectivity factor of Xe to Kr is 6.07, consistent with the adsorption selectivity(ca. 6) calculated based on the IAST.     

含氢类金刚石薄膜的生长及表征

采用射频-等离子体辅助化学气相沉积(RF-PECVD)法在硅片、玻璃上生长类金刚石薄膜.通过Raman光谱、AFM等测试手段,研究不同的生长工艺条件下类金刚石薄膜的性质的变化.实验表明,RF-PECVD生长DLC膜,在上方电极处以及较低功率下可获得较高sp3含量的薄膜.     

一种基于新型小波包阈值的图像去噪方法

提出了一种基于小波包理论去除图像噪声的方法,用小波包把图像分解为高频分量和低频分量,根据高频分量估计噪声的标准差,并利用该标准差以及Birge-Massart惩罚函数计算阈值.鉴于传统软硬阈值的缺陷,采用一种新型阈值量化方法,用三次多项式在硬阈值的基础上插值,使新的阈值函数保持了连续性和可导性.通过这种方法既消除了图像的振铃现象,又保留了细节成分.实验表明：与传统方法相比,新方法使图像视觉效果和峰值信噪比均获得提高.     

光纤陀螺温控技术的研究

温度变化将严重地影响干涉型光纤陀螺仪(IFOG)系统的零位漂移.本文在初步研究温控技术的基础上,给出一种实用的温控电路,以用于在测试温度变化所引起的零位漂移中进行温度调节与控制.通过在此电路下实测的两者变化关系曲线采取补偿措施,以减小光纤陀螺的零位漂移.     

人体静电放电对有机发光二极管的影响

研究了静电放电（ESD）人体模式（HBM）下的脉冲应力对有机发光二极管（OLED）的性能及寿命的影响,并讨论了相应的物理机制。对比分析了4组OLED在施加ESD放电为0,200,800,1 600 V前后的电学和光学特性,并进行了相应的寿命测试分析。研究发现,OLED器件的光谱对ESD不敏感,随着冲击电压的增大,由于静电打击对载流子的短期抑制效应,OLED的亮度出现轻微下降。在静电冲击电压为200 V和800 V时,伏安特性没有发生变化;当静电冲击电压增至1 600 V时,反向漏电有明显增加。后续的加速寿命实验表明,静电打击对器件的工作寿命没有明显的规律性影响,但是会一定程度提高非本质老化失效的概率。     

Responses of Issatchenkia terricola WJL-G4 upon Citric Acid Stress

This study aimed to elucidate the responses of a novel characterized Issatchenkia terricola WJL-G4 against citric acid stress by performing physiological analysis, morphology observation, and structural and membrane fatty acid composition analysis. The results showed that under citric acid stress, the cell vitality of I. terricola WJL-G4 was reduced. The cell morphology changed with the unclear, uncompleted and thinner cell wall, and degraded the cell structure. When the citric acid concentration was 20 g/L, I. terricola WJL-G4 could tolerate citric acid and maintain the cell structure by increasing the intracellular pH, superoxide dismutase activity, and contents of unsaturated fatty acids. As the citric acid concentration was ≥80 g/L, the stress has exceeded the cellular anti-stress ability, causing substantial cell damage. The cell membrane permeability, the content of membrane lipids, malondialdehyde and superoxide anion increased, but the intracellular pH and superoxide dismutase activities decreased, accompanying the increase of citric acid concentrations. The findings of this work provided a theoretical basis for the responsive mechanism of I. terricola WJL-G4 under high concentrations of citric acid, and can serve as a reference for biological acid reduction in fruit processing.     

深圳城市气溶胶物理光学特性的观测研究

气溶腔是影响气候变化和空气污染的重要因子,在深圳地区展开气溶胶观测实验,可以获得可靠的光学物理特征,进而有助于准确评估气溶胶在新型超极城市区域的气像和环境效应,本文利用2010年12月至2011年8月太阳光度计、黑碳和浊度计等气溶胶观测资料,分析了新型超级城市深圳地区的气溶胶物理光学特性,深圳地区气溶胶呈明显季节变化,冬、春季由于城市污染性气溶胶的影响,气溶胶光学厚度和Angstrom波长指数都较大,夏季受海盐气溶胶的影响,光学厚度较小Angstrom波长指数也较小,光学厚度与Angstrom波长指数对比表明城市综合性污染是引起深圳气溶胶高光学厚度的主要原因,深圳地区气溶胶的散射系数、吸收系数的平均值(标准偏差)分别为178.7×10-6 m-1 (126.6×10-6m-1和32.5×1O-6m 1 (18.1×10-6m1),均低于珠三角腹地多年观测平均值的二分之一和国内其他大型城市观测值,而单次散射反照率为0.81,与珠三角其他地区得到的结果接近.此外,气溶胶吸收、散射和单次散射反照率呈明显日变化,可能主要受大气边界层变化的影响.     

基于铰链式六面顶压机的二级6-8模超高压大腔体内置加热元件的设计与温度标定

 首次报道了一种新型的基于铰链式六面顶压机的二级6-8模大腔体静高压装置的内置加热元件的设计与温度标定。此加热组装结构简单,升温快,保温效果好,并有效地解决了国外基于两面顶压机构架下的二级6-8模内加热组装中热电偶在施加压力时易断的问题。以低成本的碳管为加热元件,采用直接和间接两种加热方式,用双铂铑（Pt6%Rh-Pt30%Rt）B型热电偶进行温度测量,并根据实验过程中加热功率与腔内实际温度的关系,对不同压力下腔体内的温度进行了标定。实验结果表明：此加热系统的油压达到40 MPa（腔体压力约10 GPa）时,温度可以达到1 700 ℃以上;在油压为30 MPa、样品室温度为1 000 ℃时,保温时间可达2 h,甚至更长;实验中获得样品的直径可达3 mm,高度可达7 mm,实现了在高温超高压条件下大样品的制备,满足了实验对产生高温超高压条件的需要。