微波辅助合成石墨烯/氧化镍复合材料及其表征

本文通过微波辅助的方法,快速而有效地在热膨胀石墨烯(RG)的缺陷上原位合成氧化镍纳米颗粒,形成石墨烯/氧化镍复合材料(RG/NiO)。利用X-射线衍射(XRD),拉曼光谱(Raman),傅里叶变换红外(FTIR),扫描电镜(SEM),透射电镜(TEM),热重-差热(TGA-DSC)对所制备样品的结构、形貌和NiO含量在复合材料中的含量进行表征。结果表明,热膨胀石墨烯层数约7~8层,层间距约为0.35nm,缺陷多,在水热和微波处理后抗氧化性明显变差。复合材料中氧化镍颗粒平均粒径为25nm,均匀而密集地分散在石墨烯平面上,同时在复合材料中的含量为19.8%。     

3，5-二硝基苯甲酸镉配合物的合成、晶体结构、热稳定性和荧光性质

以3,5-二硝基苯甲酸,咪唑为配体,合成了新化合物[Cd(H₂O)₂(DNBA)(Im)₂](DNBA)·H₂O,(DNBA=3,5-二硝基苯甲酸阴离子)。该配合物属正交晶系,空间群为Ccc2,晶胞参数：a=1.324 99(4) nm,b=1.516 01(5) nm,c=2.789 22(8) nm;V=5.602 7(3) nm³,D_c=1.719 g·cm^-3,Z=8,μ=0.866 mm^-1,F(000)=2 912,最终偏离因子R₁=0.058 3,wR₂=0.146 4。该配合物中包含两个单核镉(Ⅱ)配合物,且配合物中还包含未配位的3,5-二硝基苯甲酸,金属中心均是六配位变形八面体结构。并测定和研究了标题化合物的热重和荧光性能。     

基于氮氧自由基配体的锰和钴双核配合物的分子结构和磁性

合成了2个基于氮氧自由基配体且结构类似的双核配位化合物,其分子式分别为[Mn₂(hfac)₄(NIT-mo-pmy)₂](1)和[CO₂(hfac)₄(NIT-mo-pmy)₂](2),其中hfac=六氟乙酰丙酮,NIT-mo-pmy=2-(2-甲氧基-5′-嘧啶基)-4,4,5,5-四甲基咪唑啉基-3-氧-1-氧自由基。2个配合物均属于三斜晶系P1空间群,其双核配位单元进一步构筑为中心对称的平行四边形分子阵列。变温磁化率的测试表明,在2个配合物中,中心离子和氮氧自由基单元之间存在反铁磁交换作用。借助构效关系研究,分析了磁作用强度的差异。通过适当近似的磁化学模型,对Mn(Ⅱ)配合物的磁性行为进行了定量拟合,并与相关化合物磁作用强度进行了比对、分析。     

基于数字式MEMS传感器的声阵列成像系统设计*

常规驻极体传声器阵列成像系统存在数据采集系统复杂、体积大的问题,因而阵列传感器数量一般不超过60个,成像质量较差。为此,本文以数字式MEMS声传感器基础设计了260个传感器的声阵列,数据采集系统由FPGA控制,并嵌入到前端阵列中,后端是在另一个FPGA控制下的1个DSP芯片和2个PC104模块组成的集成系统,其中高速DSP芯片完成阵列信号处理以实现声成像功能。该系统能够实现对普通车间环境下机械设备噪声、气体泄漏噪声的现场成像测试,形成动态声像图。测试表明,该系统抗干扰能力强、声像分辨率高、成像速度快,实用效果良好。     

航天相机热实验测试系统设计

为了检测航天相机在高低温环境中的电子学性能及可靠性,针对某型号航天相机地面热实验测试需求,设计开发出了一种热实验测试系统,详细介绍了系统的软硬件设计方案及控温策略。系统使用人机交互界面实现热控策略,能实时完成最高80个测试点(160个温度传感器及80路加热器)的控温任务,可以在－30℃～＋50℃范围内对航天相机进行全方位的温度监控,最高控温精度达到0.5℃。经过实际测试验证,系统具有很好的稳定性,能满足航天相机地面热实验的测试需求,工程应用价值高。     

On the structure of split Leibniz triple systems

We study the structure of arbitrary split Leibniz triple systems with a coherent 0-root space. By developing techniques of connections of roots for this kind of triple systems, under certain conditions, in the case of T being of maximal length, the simplicity of the Leibniz triple systems is characterized.     

Synthesis of aryloxyazetidine derivatives by CuI/l-proline catalyzed coupling reaction of arylboronic acid with 1-Boc-3-iodoazetidine

A novel CuI/l-proline catalyzed coupling reaction of 1-Boc-3-iodoazetidine with various arylboronic acids which produced aryloxyazetidine derivatives in moderate to good yields was investigated.     

Crystal Structures and Photoluminescence Properties of Zinc(II) and Cadmium(II) Coordination Polymers with “Y”‐Shaped Ligands

Three Zn^II and Cd^II complexes with Y‐shaped dicarboxylate ligands, namely [Zn(L₁)(2,2′‐bpy)₂(H₂O)] · 2H₂O ( 1 ), [Zn(L₁)(bpp)(H₂O)] ( 2 ), and [Cd(L₁)(H₂O)] · H₂O ( 3 ) [H₂L₁ = N‐phenyliminodiacetic acid, 2,2′‐bpy = 2,2′‐bipyridine, bpp = 1,3‐bis(4‐pyridyl)propane] were synthesized and characterized by elemental analysis, IR spectroscopy single‐crystal X‐ray diffraction, and thermogravimetric analyses. Compound 1 shows an hydrogen‐bonded 2D network, whereas compound 2 is an infinite 1D wavy chain structure, though O–H ··· O hydrogen‐bonded to form a 2D network. Compound 3 displays a 2D uninodal 3‐connected Shubnikov plane net with the point symbol of (4.8²). Moreover, the solid‐state such as thermal stabilities and fluorescence properties of 1 – 3 were also investigated.     

Synthesis,Structure, and Properties of O6‐Corona[3]arene[3]tetrazines

O₆‐Corona[3]arene[3]tetraazines, a new class of macrocyclic compounds, were synthesized efficiently in a one‐pot reaction from the nucleophilic aromatic substitution reaction between 1,4‐dihydroxybenzene derivatives and 3,6‐dichlorotetrazine in warm acetonitrile. In the crystalline structure, the resulting macrocycles adopt highly symmetric structures of a regular hexagonal cavity with all bridging oxygen atoms and tetrazine rings located on the same plane with phenylene units orthogonally orientated. The constitutional aromatic rings are able to rotate around the macrocyclic annulus, depending on the steric effect of the substituents and temperature, in solution. The electron‐deficient nature revealed by cyclic voltammetry, differential pulse voltammetry, and characteristic absorbances at a visible region show the O₆‐corona[3]arene[3]tetrazines to be suitable macrocyclic receptors for electron‐rich guests.     

A rapid and effective method for silver staining of PCR products separated in polyacrylamide gels

With the development of molecular quantitative genetics, particularly, genetic linkage map construction, quantitative trait loci mapping or genes fine mapping and association analysis etc., more and more PCR products separated in polyacrylamide gels need to be silver‐stained. However, conventional silver‐staining procedures are complicated and time‐consuming as they require a lot of preparation and handling of several solutions prior to use. In this study, a simple and rapid protocol for silver staining of PCR products was developed. The number of steps was reduced compared to conventional protocols, thus achieving detection of PCR products in 7 min, saving time and resources. Fixation and staining solution and developing solution in present staining procedure allowed a reutilization for 12 and 8 times, respectively, reducing the cost greatly. Meanwhile, the sensitivity was significantly improved with the improved method and the minimum of 0.097 ng/μL of DNA amount can be detected in denaturing polyacrylamide gel. The protocol developed in this study will facilitate the development of molecular quantitative genetics.