金红石TiO_2中本征缺陷扩散性质的第一性原理计算

基于密度泛函理论的爬坡弹性带方法,对金红石相二氧化钛晶体中钛间隙、钛空位、氧间隙、氧空位4种本征缺陷的扩散特征进行了研究.对比4种本征缺陷在晶格内部沿不同扩散路径的过渡态势垒后发现,缺陷扩散过程呈现出明显的各向异性.其中,钛间隙和氧间隙沿[001]方向具有最小的扩散势垒路径,激活能分别为0.505 eV和0.859 eV;氧空位和钛空位的势垒最小的扩散路径分别沿[110]方向和[111]方向,激活能分别为0.735 eV和2.375 eV.     

在任意温度的热库中量子位的消相干

本文在Markov 近似下推导了在任意温度的热库中,一个量子位(qubit)的主方程,并由此讨论了由于振幅阻尼而引起的量子位消相干(decoherence). 结论表明量子位的跃迁频率与热库的特征频率及截止频率的关系对消相干有明显的影响。     

光纤陀螺温控技术的研究

温度变化将严重地影响干涉型光纤陀螺仪(IFOG)系统的零位漂移.本文在初步研究温控技术的基础上,给出一种实用的温控电路,以用于在测试温度变化所引起的零位漂移中进行温度调节与控制.通过在此电路下实测的两者变化关系曲线采取补偿措施,以减小光纤陀螺的零位漂移.     

Necklace solitons in Bessel photonic lattice: Stability and internal oscillation

Stability, internal modes and internal oscillation of 12-pearled necklace solitons in photorefractive crystal with imprinted Bessel photonic lattices are investigated. It is shown that the imaginary parts of internal modes are negligible comparing with real parts. The stable solitons perform long-distance and quasi-periodic oscillation of intensity and shape under the perturbation of internal modes.     

人体静电放电对有机发光二极管的影响

研究了静电放电（ESD）人体模式（HBM）下的脉冲应力对有机发光二极管（OLED）的性能及寿命的影响,并讨论了相应的物理机制。对比分析了4组OLED在施加ESD放电为0,200,800,1 600 V前后的电学和光学特性,并进行了相应的寿命测试分析。研究发现,OLED器件的光谱对ESD不敏感,随着冲击电压的增大,由于静电打击对载流子的短期抑制效应,OLED的亮度出现轻微下降。在静电冲击电压为200 V和800 V时,伏安特性没有发生变化;当静电冲击电压增至1 600 V时,反向漏电有明显增加。后续的加速寿命实验表明,静电打击对器件的工作寿命没有明显的规律性影响,但是会一定程度提高非本质老化失效的概率。     

Rapid Detection of Five Estrogens Added Illegally to Dietary Supplements by Combining TLC with Raman Imaging Microscope

Estrogens added illegally to dietary supplements are hazardous to human health. Traditional detection and analysis methods have many limitations, and we have developed an assay that combines thin-layer chromatography with Raman imaging microscopy (TLC-RIM). The five estrogens (estrone, estradiol, estriol, ethinyl estradiol, and diethylstilbestrol) were initially separated by TLC, then detected by area scanning Raman imaging with a 532 nm laser under a microscope. Raman spectra were obtained for each estrogen, which were used for detecting estrogen illegally added to botanical dietary supplements. The LOD of each estrogen was 0.4, 1.0, 0.8, 0.2, and 0.2 mg/mL, respectively. The matrix in the real sample did not interfere with the detection of estrogens. The method was fast, sensitive, stable, specific, and reliable.     

The Potential Antidepressant Action of Duloxetine Co-Administered with the TAAR1 Receptor Agonist SEP-363856 in Mice

Here, we explored the possible interaction between duloxetine and SEP-363856 (SEP-856) in depression-related reactions. The results showed that oral administration of duloxetine showed powerful antidepressant-like effects in both the forced swimming test (FST) and the suspension tail test (TST). SEP-856 orally administered alone also exerted an antidepressant-like effect in FST and TST, especially at doses of 0.3, 1, and 10 mg/kg. In addition, duloxetine (15 mg/kg) and SEP-856 (15 mg/kg) both showed antidepressant-like effects in the sucrose preference test (SPT). Most importantly, in the above experiments, compared with duloxetine alone, the simultaneous use of duloxetine and SEP-856 caused a more significant antidepressant-like effect. It is worth noting that doses of drug combination in FST and TST did not change the motor activities of mice in the open-field test (OFT). Thus, duloxetine and SEP-856 seem to play a synergistic role in regulating depression-related behaviors and might be beneficial for refractory depression.     

A Simple Hydrothermal Method for the Growth of ZnO Crystals

ZnO microstructures have been grown from zinc chloride (ZnCl₂) and ammonia solution at 100 °C for 1 – 24 hours. X‐ray diffraction, scanning electron microscope and field‐emission scanning microscope were utilized to investigate the structural properties and morphology of the ZnO crystals. Structural investigations show that phase‐pure hexagonal structure ZnO has been successfully synthesized, and the hexagonal structure ZnO can be achieved in solutions with an appropriate range of concentrations. Under our experimental conditions, several different morphologies of ZnO structures were obtained, including flower‐like and bar flower‐like. The relationship between the morphology and experimental conditions are discussed.     

深圳城市气溶胶物理光学特性的观测研究

气溶腔是影响气候变化和空气污染的重要因子,在深圳地区展开气溶胶观测实验,可以获得可靠的光学物理特征,进而有助于准确评估气溶胶在新型超极城市区域的气像和环境效应,本文利用2010年12月至2011年8月太阳光度计、黑碳和浊度计等气溶胶观测资料,分析了新型超级城市深圳地区的气溶胶物理光学特性,深圳地区气溶胶呈明显季节变化,冬、春季由于城市污染性气溶胶的影响,气溶胶光学厚度和Angstrom波长指数都较大,夏季受海盐气溶胶的影响,光学厚度较小Angstrom波长指数也较小,光学厚度与Angstrom波长指数对比表明城市综合性污染是引起深圳气溶胶高光学厚度的主要原因,深圳地区气溶胶的散射系数、吸收系数的平均值(标准偏差)分别为178.7×10-6 m-1 (126.6×10-6m-1和32.5×1O-6m 1 (18.1×10-6m1),均低于珠三角腹地多年观测平均值的二分之一和国内其他大型城市观测值,而单次散射反照率为0.81,与珠三角其他地区得到的结果接近.此外,气溶胶吸收、散射和单次散射反照率呈明显日变化,可能主要受大气边界层变化的影响.     

基于铰链式六面顶压机的二级6-8模超高压大腔体内置加热元件的设计与温度标定

 首次报道了一种新型的基于铰链式六面顶压机的二级6-8模大腔体静高压装置的内置加热元件的设计与温度标定。此加热组装结构简单,升温快,保温效果好,并有效地解决了国外基于两面顶压机构架下的二级6-8模内加热组装中热电偶在施加压力时易断的问题。以低成本的碳管为加热元件,采用直接和间接两种加热方式,用双铂铑（Pt6%Rh-Pt30%Rt）B型热电偶进行温度测量,并根据实验过程中加热功率与腔内实际温度的关系,对不同压力下腔体内的温度进行了标定。实验结果表明：此加热系统的油压达到40 MPa（腔体压力约10 GPa）时,温度可以达到1 700 ℃以上;在油压为30 MPa、样品室温度为1 000 ℃时,保温时间可达2 h,甚至更长;实验中获得样品的直径可达3 mm,高度可达7 mm,实现了在高温超高压条件下大样品的制备,满足了实验对产生高温超高压条件的需要。