奇偶相干态的高阶压缩及其准概率分布函数

本文研究了奇偶相干态的高阶压缩和它们的各种准概率分布函数,结果表明,这两个态的高阶压缩性质是相互排斥的,特征函数和Wigner函数都不是高斯型,而且Wigner函数也不恒为正定,准概率密度(QPD)图形既不是椭圆,也不是月牙状,而是两叶花瓣状,显示出态的QPD图形不能说明态的压缩类型。 关键词：     

Noise analysis of an electro-optic sensor system

Optical Review - This paper describes the noise analysis of an electro-optic (EO) sensor system based on experimental and simulation results. We developed a polarization simulator of the EO sensor...     

Facile and Scalable Synthesis of Si@void@C Embedded in Interconnected 3D Porous Carbon Architecture for High Performance Lithium-Ion Batteries

Si-based materials possess huge potential as an excellent anode material for Li-ion batteries. However, how to realize scalable synthesis of Si-based anode with a long cycling life and high-performance is still a critical challenge. Here a water-in-oil microemulsion process followed by UV illumination, calcination, and hydrothermal method to produce yolk-shell Si@void@C embedded in interconnected 3D porous carbon network architecture using silicon nanoparticles is reported. As a result, the sample Si@void@C/C-2 electrode has achieved a reversible capacity of 1160 mA h g⁻¹ at 0.2 A g⁻¹ after 300 cycles and a stable long cycling life of 480 mA h g⁻¹ at 1 A g⁻¹ after 1000 cycles. A full battery with the synthesized anode shows a capacity of 128 mA h g⁻¹ at 0.2 A g⁻¹ as well as good cycling stability after 1100th cycles. Such excellent electrochemical performance is ascribed to its unique structure, the yolk-shell void space, highly robust carbon shells and interconnected porous carbon nets that can improve the conductivity of the electrode, buffer the volume expansion, and also suppress Si nanoparticles stress variation. This water-in oil system makes it possible for mass production of environmentally friendly synthesis of core–shell structure.     

Amorphous High-Entropy Hydroxides of Tunable Wide Solar Absorption for Solar Water Evaporation

The high-entropy materials have raised much attention in recent years due to their extraordinary performances in mechanical, catalysis, energy storage fields. Herein, a new type of high-entropy hydroxides (e.g., NiFeCoMnAl(OH)_x) that are amorphous and capable of broad solar absorption is reported. A facile one-pot co-precipitation method is employed to synthesize these amorphous high-entropy hydroxides (a-HEHOs) under ambient conditions. The a-HEHOs thus obtained display widely tunable bandgap (e.g., from 2.6 to 1.1 eV) due to their high-entropy and amorphous characteristics, enabling efficient light absorbance and photothermal conversion in the solar regime. Further solar water evaporation measurements show that the a-HEHOs delivered a considerable energy conversion efficiency of 55%, comparable to black titanium oxides that are synthesized using more complex and expensive methods.     

HL-2M 磁体系统安装中的定位与测量

为提高磁体系统安装精度,在 HL-2M 集成大厅建立 63 个基准点构成测量基准网,并利用激光跟 踪仪等高精度测量设备建立每个磁体的局部坐标系,测量特征点的局部坐标;基于测量基准网和公共测量点,采 用最佳拟合得到坐标转换矩阵,以此得到特征点在测量基准网的位置,指导磁体安装。完成安装后的中心柱同支 撑基础的同轴度为∅2.03mm;PF1~PF4 线圈安装标高偏差为±0.5mm,与中心柱的同轴度为∅2.60mm;PF5/6/7/8 线圈与中心柱的同轴度偏差小于∅3.00mm,标高偏差在[−1mm, 1mm]区间内。基于以上方法所得到的线圈安装精 度都满足设计需求。     

HL-2M 装置真空室设计

HL-2M 真空室结构为“D”形截面的双层-薄壁-全焊接式-环状结构,内环直径 2m,外环径 5.22m, 高 3.02m,由 20 个扇形段组成而成。真空室上开设有 121 个窗口以满足真空抽气、实验诊断、辅助加热及工程安 装等方面的要求;支撑采用滑动杆式结构;材料选用 Inconel625、Inconel718 与 316L 组合。运用有限元法对真空 室进行了结构强度评估,真空室满足设计要求。     

HL-2M 装置初始等离子体放电阶段的直流辉光放电清洗系统研制

基于 HL-2M 托卡马克初始等离子体放电的工程需求,设计并研制了直流辉光放电清洗系统,包括电 极、馈线、电源、控制以及监测等关键部件和辅助子系统。研制完成后开展了系统装配和工程调试,并投入到首 次等离子体放电。实验结果表明,该直流辉光放电系统运行稳定、可靠,且此辉光放电清洗显著降低了真空室本 底杂质浓度,能满足 HL-2M 装置初始等离子体放电的壁条件需求。     

HL-2M 真空室保温层设计及安装

基于 HL-2M 真空室烘烤保温要求,通过有限元分析和原型件实验确定采用陶瓷纤维与纳米级微孔材 料组合作为 HL-2M 真空室保温材料。在 30℃时,保温层的导热系数小于 0.027W⋅m⁻¹·℃⁻¹;300℃时,导热系数 小于 0.038W⋅m⁻¹·℃⁻¹。在保温层厚度 25mm、热面温度 300℃且达到稳态时,冷面可控制在 85℃以下,线圈侧的 温度低于 60℃,整体热损失小于 12kW,满足 HL-2M 真空室烘烤需求。      

HL-2M 主机抗扭转支撑结构计算分析

根据通电的环向场(TF)线圈在磁场作用下将产生侧向力和径向力,提出了抗扭转支撑结构方案。该方案能够降低这两种力对 TF 线圈的影响,并且保证线圈连接面的紧密接触和绝缘层不会发生相对错动。对抗扭转支撑结构进行计算分析,确定该结构的受力方式以及传力路径。结果表明,在实验运行以及极端工况下结构的应力、位移能够到达设计要求,通过疲劳计算得出抗扭转支撑结构能满足 20 年以上的实验运行,能够保证 HL-2M装置安全、平稳和可靠的运行。      

HL-2M 装置磁测量传感器的定位安装

通过数值计算评估了 HL-2M 装置磁测量传感器安装精度的要求,其中磁通环坐标(R, Z)的安装偏差 要求达到±2.0mm 以内,磁探针的(R, Z)偏差要求在±1.0mm 以内、角度偏差在±0.1°以内。定位安装采用高精度激 光跟踪仪和关节测量臂结合,设备定位精度在±0.3mm。根据不同种类的磁测量传感器的定位安装特点,优化设 计了包括磁通环、磁探针阵列、逆磁同心圆等的定位结构,将 HL-2M 磁测量传感器的安装精度控制到在±0.5mm 水平。