Determination of glycols by HPLC with refractive index detection

A simple and fast HPLC method for the determination of glycols is described. It is characterized by a reversed-phase separation using water as eluent and a refractive index detection. The method was applied to investigate the biodegradation of glycols in a laboratory activated sludge plant and to determine the content of glycols or alcohols in detergents. The detection limit is 4 mg/l ethylene glycol or propylene glycol in an aqueous sample.     

Raman spectroscopy of carbon fibres

Investigations of coated carbon fibres are reported using Raman spectroscopy. Relationships between different process parameters (for example precursor concentration, reactor temperature and various precursors) and the resulting types of carbon fibres are discussed.     

Comparison of four quantification methods for the determination of PCB in transformer oils

The analysis of PCB in transformer oils has been achieved with three HRGC/ECD based methods, proposed by the International Electrotechnical Commission (IEC/TC 10), by the Comité Européen de Normalisation (CEN/TC 19/WG 22) and by the Deutsches Institut für Normung (DIN 51 527). The same clean-up, described in the CEN/TC 19/WG 22, has been used for all the samples, allowing a comparison of the quantification procedure only. The total chlorine content has also been determined with X-ray fluorescence. These different methods of quantification are compared and their application for legislative purposes is discussed.Dedicated to Professor Dr Dieter Klockow on the occasion of his 60th birthday     

Preconcentration of trace antimony in tap and sea water on activated alumina. Determination by graphite furnace atomic absorption spectrometry

Summary A method is described for antimony preconcentration based on retention on a column of activated alumina. Recovery is 80% when no pH-control and 4 mol/l HCl as eluent are used. The preconcentration factor is 400. The method was applied to the determination of antimony in spiked tap and sea water. The analytical performance of the method is discussed.     

TEM investigations on PECVD-titanium carbide layers

TiC_x-PECVD-layers were characterized by TEM. EDX analysis and electron diffraction. TiC_x-layers deposited using benzene showed a columnar structure, at which the column size decreases with rising excess carbon content. TiC_x-layers deposited using n-heptane presented a lamellar structure, at which the lamellar thickness diminishes with an increasing excess carbon content. In dependence on the layer thickness a periodic progress of the element contents was observed, at which a maximum for Ti and Cl correlates with a minimum for C. It was found that the incorporated chlorine is bonded to titanium. The lattice parameter depends on the chlorine content. Using TiCl₄/H₂/Ar-gas mixtures without any hydrocarbon, layers containing TiH₂ are formed.     

Chemometric approaches in environmental problems concerning PCDD and PCDF. Data interpretation and source correlation. Mechanisms of formation and destruction in MSW combustion process

Summary The role of multivariate analysis methods in evaluating, rationalizing, and working out complex environmental problems is discussed. The discussion is organized in two sections; a literature analysis of the application of chemometric methods to PCDD/PCDF data interpretation and source correlation and a review of the role of chemometric methods in analysing the results obtained by the Authors studying PCDD/PCDF formation and destruction mechanisms in MSW combustion processes.     

Trace determination of Tl, Cu, Pb, Cd, and Zn in specimens of the limnic environment using isotope dilution mass spectrometry with thermal ionization

Within the framework of the German Environmental Specimen Bank program, Tl, Cu, Pb, Cd and Zn were determined in homogenized materials from the limnic environment using Isotope Dilution Mass Spectrometry (IDMS) with thermal ionization. The analytical procedures which were developed for the trace metal analysis of bioindicator and sediment samples are described in detail. Results obtained in bream, mussels (Dreissena polymorpha) and sediments of Lake Constance/Estuary of Constance in the sampling years 1981, 1985, 1988, 1990, 1992 and 1993 are discussed and compared with those of bream from the lakeland district of Born-hoeved/Lake Belau and from the River Saar as well as from reference materials.     

Model calculations of interface segregation in dilute systems

Using a discrete model for the segregation kinetics based on the Darken theory of diffusion and on the regular solution model (RSM), one and two dimensional simulations of interface segregation in binary and ternary systems have been performed. The aim of the calculations was to investigate the kinetics of segregation sequences in ternary systems, the segregation kinetics in discrete systems during the initial phase and finally the kinetics of surface segregation in the region of a grain boundary intersected by the surface.