6H-SiC衬底片的表面处理

相比于蓝宝石,6H-SiC是制作GaN高功率器件更有前途的衬底.本文研究了表面处理如研磨、化学机械抛光对6H-SiC衬底表面特性的影响.用显微镜、原子力显微镜、拉曼光谱、卢瑟福背散射谱表征了衬底表面.结果表明经过两步化学机械抛光后提高了表面质量.经第二步化学机械抛光后的衬底具有优异的表面形貌、高透射率和极小的损伤层,其表面粗糙度RMS是0.12nm.在该衬底上用MOCVD方法长出了高质量的GaN外延膜.     

Pyrene分子(小片石墨晶体)的电子传导特性

利用量子理论中基于Green函数的tight-binding方法,对pyrene分子的电子传导和电子流分布进行了理论研究。在考虑到界面耦合和Hopping积分的情况下,得出了电子透射谱和流分布的模拟结果。结果显示透射与电子的能量紧密相关;谱的振荡特征是能级量子化的结果;流分布有着特定的方向,并且在每一个原子点上符合Kirchhoff量子流守恒定律。另外还发现了桥接pyrene分子的正负能开关特性。     

低温制备≥99.5%多晶氧化铝陶瓷

本文通过引入稀土氧化物Y2O3、Tm2O3为烧结助剂低温制备了氧化铝含量大于99.5;的多晶氧化铝陶瓷.实验表明:稀土氧化物的加入能够明显降低99.5;多晶氧化铝陶瓷的烧结温度,提高致密度.Y2O3、Tm2O3混合烧结助剂与单一稀土氧化物的烧结助剂相比能够明显抑制晶粒的生长,促进晶粒的均匀发育.当Y2O3+Tm2O3的含量为0.3;质量分数时,99.5;多晶氧化铝陶瓷的相对密度可达99.2;理论密度,抗弯强度为533MPa,显微硬度为17.2GPa.陶瓷断裂主要以穿晶断裂为主.     

Er3+:NaY(Wo.9Moo.1O4)2晶体的生长及光谱性能

采用提拉法(CZ法),生长出质量良好的Er3+:NaY(W0.9Mo0.1O4)2晶体.通过X射线粉末衍射,红外光谱分析,并与NaY(WO4)2相比较,得到Er3+:NaY(W0.9Mo0.1O4)2晶体的结构与NYW类似,仍为四方晶系的白钨矿结构,I4(1)/α空间群.测定了晶体的实际组成,得到晶体中各元素均按理论值进行掺杂,计算了掺杂离子的分凝系数约为1.15.在光谱性质上,测试了晶体的吸收光谱,及晶体在50～1000cm-1波数范围内的拉曼光谱,并计算了各吸收峰的半峰宽及吸收系数A.     

新版《高分子化学》解读

旨在剖析祖仁教授主编的《高分子化学》第四版的教学思想和撰写特点,涉及章节、内容的选择和安排、逻辑思维和教学方法,以及一些技术术语等。同时也指出了新版教材的一些印刷错误等。     

Tailoring Pore Structure and Morphologies in Covalent Organic Frameworks for Xe/Kr Capture and Separation

As a rising star among porous solid materials, covalent organic frameworks(COFs) with excellent properties including but not limit to facilely controllable structure, high porosity, and multi-chemical functionality represent significant potential for efficient ¹²⁷Xe/⁸⁵Kr capture and separation. In this study, through tuning the length of the organic ligands, two-dimensional(2D) COF mate-rials with identical connection group but different pore properties, denoted as ATFG-COF and TpPa-COF with AA-stacking model and TpBD-COF with AB-stacking model were synthesized and tested for Kr and Xe adsorption for the first time. Adsorption measurements indicate that the narrower pore apertures and higher porosity are conducive for COF materials to capture Xe and Kr. Furthermore, the Henry's constant, isosteric heat of adsorption(Q_st), and ideal adsorbed solution theory(IAST) selectivity of ATFG-COF, the pore size of which is closest to the kinetic diameter of the Xe atom(0.41 nm) among 2D COF materials, were carried out based on the single component sorption isotherms. The results illustrate that the high isosteric heat values of Xe/Kr adsorption on ATFG-COF are 25 and 16 kJ/mol at room temperature, respectively. Henry's law predicts that the selectivity factor of Xe to Kr is 6.07, consistent with the adsorption selectivity(ca. 6) calculated based on the IAST.     

含氢类金刚石薄膜的生长及表征

采用射频-等离子体辅助化学气相沉积(RF-PECVD)法在硅片、玻璃上生长类金刚石薄膜.通过Raman光谱、AFM等测试手段,研究不同的生长工艺条件下类金刚石薄膜的性质的变化.实验表明,RF-PECVD生长DLC膜,在上方电极处以及较低功率下可获得较高sp3含量的薄膜.     

Computational fluid dynamic-discrete element method coupling analysis of particle transport in branched networks

An understanding of the particle transport characteristics in a branched network helps to predict the particle distribution and prevent undesired plugging in various engineering systems.Quantitative analysis of particle flow characteristics is challenging in that experiments are expensive and particle flow is difficult to detect without disturbing the flow.To overcome this difficulty,man-made fractal tree-like branched networks were built,and a coupled computational fluid dynamic and discrete element method model was applied.A series of numerical simulations was carried out to analyze the influence of fractal structure parameters of networks on the particle flow characteristics.The joint influence of inertial,shunt capacity and superposition from upstream branches on particle flow was investigated.The injection position at the inlet determined the particle velocity and its future flow path.The particle density ratio,particle size and bifurcation angle had a greater influence on the shunting of K2 branches than that in the K1 level and N_k22/N_k21 reached a maximum at 60°.Compared with a network with an even number of branches,there was a preferential branch when the branch number was odd.The preferential branch effect or asymmetry degree of the level(K2)branches had a more significant impact on particle shunting than that from the upstream branches(K1).     

光纤陀螺温控技术的研究

温度变化将严重地影响干涉型光纤陀螺仪(IFOG)系统的零位漂移.本文在初步研究温控技术的基础上,给出一种实用的温控电路,以用于在测试温度变化所引起的零位漂移中进行温度调节与控制.通过在此电路下实测的两者变化关系曲线采取补偿措施,以减小光纤陀螺的零位漂移.     

深圳城市气溶胶物理光学特性的观测研究

气溶腔是影响气候变化和空气污染的重要因子,在深圳地区展开气溶胶观测实验,可以获得可靠的光学物理特征,进而有助于准确评估气溶胶在新型超极城市区域的气像和环境效应,本文利用2010年12月至2011年8月太阳光度计、黑碳和浊度计等气溶胶观测资料,分析了新型超级城市深圳地区的气溶胶物理光学特性,深圳地区气溶胶呈明显季节变化,冬、春季由于城市污染性气溶胶的影响,气溶胶光学厚度和Angstrom波长指数都较大,夏季受海盐气溶胶的影响,光学厚度较小Angstrom波长指数也较小,光学厚度与Angstrom波长指数对比表明城市综合性污染是引起深圳气溶胶高光学厚度的主要原因,深圳地区气溶胶的散射系数、吸收系数的平均值(标准偏差)分别为178.7×10-6 m-1 (126.6×10-6m-1和32.5×1O-6m 1 (18.1×10-6m1),均低于珠三角腹地多年观测平均值的二分之一和国内其他大型城市观测值,而单次散射反照率为0.81,与珠三角其他地区得到的结果接近.此外,气溶胶吸收、散射和单次散射反照率呈明显日变化,可能主要受大气边界层变化的影响.