任意维欧氏空间的长程势多极展开

给出了在任意维欧氏空间中一个一般的长程相互作用势的多极展开结果,并推导得到了单极子和偶极子两两之间的相互作用力公式.     

线电荷与接地椭圆柱形导体系统的电势

利用保角变换将椭圆柱变换为圆柱,再由镜像法给出了线电荷与接地椭圆柱形导体系统的电势.     

微波分光仪角锥喇叭天线的优化

简述了角锥喇叭天线的设计原理,对微波分光仪角锥喇叭天线进行了优化设计.结果表明,优化后的角锥喇叭天线单向传输性与增益均得到改善.     

Structural Deformation of CO22+ in Intense Femtosecond Laser Fields

The angular distributions of CO^＋ from the dissociation of CO2^2＋ and CO2^＋ in intense femtosecond laser fields （45 fs, about 5 × 10^15 W/cm^2） are studied at a laser wavelength of 800nm based on the time-of-flight mass spectra of CO^＋ fragment ions. The experimental results show that structural deformation occurs in the charge state of CO2^2＋ and the CO^＋ maintains linear geometrical structure.     

High Polarization Single Mode Photonic Crystal Microlaser

Generally, dipole mode is a doubly degenerate mode. Theoretical calculations have indicated that the single dipole mode of two-dimensional photonic crystal single point defect cavity shows high polarization property. We present a structure with elongated lattice, which only supports a single y-dipole mode. With this structure we can eliminate the degeneracy, control the lasing action of the cavity and demonstrate the high polarization property of the single dipole mode. In our experiment, the polarization extinction ratio of the y-dipole mode is as high as 51：1.     

Charge Transport and Magnetotransport Properties of Polyimide Irradiated by 80keV Co Ions

Charge transport properties of polyimide films implanted with 80 keV Co ions at two different fluences （series I： 1.25 × 10^17 ions/cm^2, series Ⅱ： 1.75 × 10^17 ions/cm^2） are studied in detail. For series I, the temperature dependence of surface resistivity fits Mott＇s equation very well. It is on the insulating side of the insulator-metal transition （IMT）. However, for series Ⅱ, the temperature dependence of surface resistivity is not in agreement with Mott＇s equation. It is on the metallic side of lMT. The magnetotransport properties of these two series are also studied. No significant magnetoresistive effect is observed for series I at both 5 K and 300 K. For series Ⅱ, an obvious magnetoresistive effect is observed at 5 K, while there is no magnetoresistive effect at 300 K. Rutherford backscattering spectrometry （RBS） is applied to confirm the actual fluence for these two series.     

Design, Fabrication and Test of a Soft X-Ray Even-Order Transmission Grating

Most transmission gratings in the x-ray region work with their first orders and dispersion is limited by the line density achievable with current fabrication technology. We present a novel design of a two-dimensional x-ray transmission grating. The grating works with higher dispersion using its second orders, and the influence from first and third orders can be suppressed. A grating according to the novel design is fabricated and its diffraction performance is tested in comparison with a traditional x-ray transmission grating with the same line density. The novel grating could be especially useful when high dispersion is desired while the fabrication of high-density gratings becomes more difficult.     

All-Solid-State Nd:YAG Laser Operating at 1064nm and 1319nm under 885nm Thermally Boosted Pumping

We report a high-effciency Nd：YAG laser operating at 1064 nm and 1319nm, respectively, thermally boosted pumped by an all-solid-state Q-switched Ti：sapphire laser at 885 nm. The maximum outputs of 825.4 m W and 459.4mW, at 1064nm and 1319nm respectively, are obtained in a 8-ram-thick 1.1 at.% Nd：YAG crystal with 2.1 W of incident pump power at 885nm, leading to a high slope efficiency with respect to the absorbed pump power of 68.5% and 42.0%. Comparative results obtained by the traditional pumping at 808nm are presented, showing that the slope efficiency and the threshold with respect to the absorbed pump power at 1064nm under the 885nm pumping are 12.2% higher and 7.3% lower than those of 808rim pumping. At 1319nm, the slope efficiency and the threshold with respect to the absorbed pump power under 885nm pumping are 9.9% higher and 3.5% lower than those of 808 nm pumping. The heat generation operating at 1064 nm and 1319 nm is reduced by 19.8% and 11.1%, respectively.     

Friction Properties of Bio-mimetic Nano-fibrillar Arrays

Nano-fibrillar arrays are fabricated using polystyrene materials. The average diameter of each fiber is about 300 nm. Experiments show that such a fibrillar surface possesses a relatively hydrophobie feature with a water contact angle of 142°. Nanoscale friction properties are mainly focused on. It is found that the friction force of polystyrene nano-fibrillar surfaces is obviously enhanced in contrast to polystyrene smooth surfaces. The apparent coefficient of friction increases with the applied load, but is independent of the scanning speed. An interesting observation is that the friction force increases almost linearly with the real contact area, which abides by the fundamental Bowden-Tabor law of nano-seale friction.     

Derivative of Electron Density in Non-Equilibrium Green's Function Technique and Its Application to Boost Performance of Convergence

The non-equilibrium Green＇s function （NEGF） technique provides a solid foundation for the development of quantum mechanical simulators. However, the convergence is always of great concern. We present a general analytical formalism to acquire the accurate derivative of electron density with respect to electrical potential in the framework of NEGF. This formalism not only provides physical insight on non-local quantum phenomena in device simulation, but also can be used to set up a new scheme in solving the Poisson equation to boost the performance of convergence when the NEGF and Poisson equations are solved self-consistently. This method is illustrated by a simple one-dimensional example of an N＋＋ N＋ N＋＋ resistor. The total simulation time and iteration number are largely reduced.