Theoretical design of singlet localized σ-diradicals: C(MH2)3C (M = Si, Ge, Sn, Pb)

Some localized singlet 1,3-σ-diradicals, C(MH₂)₃C, (M = Si, Ge, Sn, Pb) were theoretically designed by the orbital phase theory and density functional theory calculations. The bicyclic carbon-centered singlet diradicals were more stable than the lowest triplets. Except for M = C, σ-bonded isomers were not located for 1,3-σ-diradicals. 1,4-σ-diradicals, C(M₂H₄)₃C, also had singlet ground states, but they were less stable than σ-bonded isomers.     

聚二甲基硅氧烷分子在溶液中的扩张

高分子溶液性质依赖于在溶液中的形态,高分子-良溶剂溶液由于高分子链段与溶剂分子间相互作用使末端矩h~2~(1/2)大于θ-条件下末端矩h_0~2~(1/2),一维扩张因子α以下式表示     

Synthesis of alpha-fluorosulfonamides by electrophilic fluorination

Alpha-fluorosulfonamides were prepared by electrophilic fluorination of tertiary sulfonamides using N-fluorobenzenesulfonimide as fluorinating agent and utilizing the dimethoxybenzyl group (DMB) as a new sulfonamide protecting group. Removal of the DMB group with TFA/CH(2)Cl(2) gave primary and secondary alpha-fluorosulfonamides.     

Implicit solvent simulations of DPC micelle formation

The formation of micelles by dodecylphosphocholine (DPC) is modeled by treating the surfactants in atomic detail and the solvent implicitly, in the spirit of the EEF1 solvation model for proteins. The solvation parameters of the DPC atoms are carried over from those of similar atoms in proteins. A slight adjustment of the parameters for the headgroup was found necessary for obtaining an aggregation number consistent with experiment. Molecular dynamics simulations of 960 DPC molecules at different concentrations are used to obtain the aggregation number, the micelle size distribution, and the CMC. At 20 mM concentration we obtain an aggregation number of 53-56 and a CMC of 1.25 mM, values close to the experimental ones. At 100 mM the aggregation number increases to 90. Simulations of individual micelles of varying size show that the effective energy per surfactant molecule is initially a decreasing function of aggregation number but stabilizes at about 60 molecules. The van der Waals term and the desolvation of nonpolar groups contribute to micellization, whereas the desolvation of polar groups opposes it. From the difference between the effective energy and the free energy (calculated from the CMC), the translational and rotational entropy contributions to the free energy are estimated at about 7 kcal/mol per monomer. The micelles obtained here are more irregular than those obtained in explicit water simulations. This modeling approach allows the study of larger surfactant aggregates for longer times and the extraction of thermodynamic in addition to structural information.     

Synthesis and mesomorphic properties of n-butyl-4- [4-((4-n-alkoxyl-tetrafluorophenyl)ethynyl)benzyloxy]benzoates

A homologous series of n-butyl-4-[4-((4-n-alkoxyl-tetrafluorophenyl)ethynyl)benzyloxy]benzoates have been synthesized.Their phase transition temperatures have also measured by polarizing textural observation and confirmed by DSC.     

An investigation into causes and effects of high cyanide levels in the palladium-catalyzed cyanation reaction

[reaction: see text] The palladium-catalyzed cyanation reaction is known to be sensitive to dissolved cyanide. Investigation into some causes of high levels of dissolved cyanide is presented here, along with a robust solution to this problem.     

用电子散斑干涉法测量材料热膨胀系数

 利用双光束电子散斑干涉法（ESPI）对试件受热变形进行了实时观测，针对一次实验过程中得到的图片较多（300～500幅）的特点，在图像处理时摒弃了以往的手动识别等位移线的办法，用MATLAB语言编写了批处理程序，能够在采集的大量散斑图片中自动快速准确地标定等位移线，得到相应的位移和应变，并结合实时测量的温度值，获得了45钢和LY12铝合金在不同温升率下的热膨胀系数及其随温度的变化。实验结果表明，在涉及的温升率范围内，温升率的改变对材料热膨胀系数的影响不明显，材料的热膨胀系数随温度的升高略有上升。     

激光通道传输热特性对远场光束质量的影响

 通过仿真计算分析了激光在光束控制系统通道内传输所产生的热效应及其对远场光束质量的影响。激光传播由近轴波方程描述，用快速傅里叶变换技术求解；激光热效应引起的流场密度变化采用完全Navier-Stokes方程计算。计算给出了不同波长、不同吸收系数条件下的远场光斑情况。计算结果表明，在典型的工作条件和状态下，较高能量激光在光束控制系统通道内产生的热效应影响不容忽视，它会明显降低远场目标处的能量集中度，增大光斑的发散。     

脉冲泄流时土壤条件对冲击接地阻抗的影响

 为了探寻电流脉冲泄流时，设备的接地是否有效可靠，用FDTD法分析了脉冲泄流时均一土壤、分层土壤及局部改善土壤的电导率对冲击接地阻抗（TGR）的影响。结果表明：大地电导率对冲击接地阻抗的影响很大；对均一土壤，TGR随大地电导率的增大而减小，大地电导率越大，TGR对接地体的埋深越不敏感。对分层土壤，接地体要埋在大地电导率大的土壤层中，且不要靠近交界面；局部改善大地导电性能对降低TGR效果明显，TGR对改善区域的体积非常敏感，而当电导率大于一定值时，大地电导率的再增加，对TGR的影响不明显。     

粉末压片-X荧光光谱法测定过磷酸钙中硫含量

硫是过磷酸钙中重要营养指标之一,为准确快速测定过磷酸钙中硫的含量,试验采用粉末压片-X荧光光谱法,将过磷酸钙试样充分干燥后研磨至粒度小于74 μm,采用硼酸镶边,在压力18 Mpa条件下保压30 s,制成样片。通过在过磷酸钙样品中添加不同质量的纯物质硫酸钙（质量分数范围1.52 %～17.21 %）,经过专用混匀设备混合均匀后,与试样压片相同条件下压制标准样片,作为过磷酸钙中硫的标准样品,建立硫标准曲线,曲线线性相关系数R2为0.9995,采用经验系数法校正干扰,建立了粉末压片-波长色散X射线荧光光谱法测定过磷酸钙中硫含量的方法, 方法检出限为0.002 %。对3个不同硫含量的过磷酸钙样品采用本实验方法重复测量7次,RSD在1.4 %~3.1 %,方法精密度性好,同时用高温燃烧红外光谱法和电感耦合等离子发射光谱法对比,三者测量结果相对极差小于2.0 %,测量结果无显著性差异。此方法不需要对样品进行熔融或溶解,样品制备简单,数据准确度和稳定性好,分析效率高,适合大批量样品中硫的测定。