四种药用香薷植物中多种微量元素分析

对高原香薷、萼果香薷、密花香薷、细穗香薷等四种药用香薷植物中的17种微量元素含量进行了测定和分析。结果表明,4种香薷植物中常量元素以K含量最高,其次为Ca、Mg、Na;必需微量元素中以Cu、Fe、Mn元素的含量为高;非必需微量元素As、Hg、Pb、Cd、Sb含量较低,从重金属元素的角度考虑,使用所测定的4种香薷植物是安全的。     

12C6+离子对阿维链霉菌累进辐照诱变效应研究

选用12C6+ 离子束对阿维链霉菌诱变选育高产菌株与原始菌株进行辐照诱变, 研究其累进辐照效应。实验结果表明,在辐照剂量为10 Gy时, 原始菌株比诱变高产菌株存活率高, 抗辐射能力强;辐照剂量高于30 Gy时,诱变高产菌株比原始菌株存活率高, 抗辐射能力强。原始菌株正突变率最高的辐照剂量为50 Gy, 致死率99.43%,正突变率最高, 达34.2%;对诱变高产菌株辐照剂量为30 Gy,致死率94.97%,正突变率最高, 达23.5% 。累进辐照效应降低了最佳辐照剂量。 Mutagenic effect on the mutant high producing strain ZJAV Y1 203 and the original strain ZJAV A1 irradiated by ion beam of 12C6+ have been investigated. The experimental results indicated that the original strain has higher survival rate and stronger resistance to radiation than mutant high producing Strain at dose of 10 Gy. The mutant high producing strain has higher survival rate and stronger resistance to radiation than the original strain at the dose higher than 30 Gy. The lethality was 97% and the highest rate of orthomutation was 34.2%, when ZJAV A1 was irradiated by 50 Gy 12C6+ beam. The lethality was 94.97% and the highest rate of orthomutation was 23.5% when ZJAV Y1 203 was irradiated by 30 Gy 12C6+ beam. The best radiation dose is decreased by progressivity irradiation.     

Amphiphilic ABC Triblock Terpolymer Templating for Mesoporous Silica

Self-assembled triblock terpolymers have attracted intense attention in recent years because of their abundant variety of assembly mesostructure. We reported the synthesis of mesoporous silica materials with the am- phiphilic ABC triblock terpolymer polyethylene-poly（ethylene oxide）-polycaprolactone（PE-PEO-PCL） as a template and tetraethoxysilane（TEOS） as a silica source. Increasing the hydrophilic head group（PEO） led to the decrease of packing parameter g, which gave rise to the mesophase transformation from a cylindrical two-dimensional hexagonal P6mm structure to a cage-type face centered cubic closed-packing mesostructure. This new templating route provided a new insight into the template factor governed inorganic-organic self-assembly mesophases.     

Highly Efficient Organic Ultraviolet Photodetectors Based on Re(I) Complexes

High response organic ultraviolet photodetectors(UV-PDs) were demonstrated with 4,4',4'- tris[3-methyl-pheny(phenyl)amino]triphenylamine(m-MTDATA) and two Re(I) complexes, (bathocuproine)- Re(CO)₃Cl(Re-BCP) and (bathophenanthroline)Re(CO)₃Cl(Re-Bphen) to act as the electron donor and acceptor, respectively. UV-PDs have the configuration of indium tin oxide(ITO)/m-MTDATA(25 nm)/m-MTDATA:Re-complex (25―35 nm)/Re-complex(20 nm)/LiF(1 nm)/Al(200 nm) with different blend layer thicknesses of 25, 30 and 35 nm. The optimized PD based on Re-Bphen offers a corrected-dark photocurrent up to 760 μA/cm² at ?10 V, corresponding to a response of 310 mA/W which is among the best values reported for organic UV-PDs. Excellent electron transport ability makes for such high photo-to-electron conversion.     

共线DP-LIBS低碳合金钢中碳元素定量分析

碳元素是决定合金钢性能的重要元素之一。为了提高低碳合金钢中碳元素的检测灵敏度,在氩气氛围中利用共线双脉冲激光诱导击穿光谱(DP-LIBS)合金钢样品中的碳元素进行了检测。首先,使用高速相机采集双脉冲实验条件下的等离子体图像,研究等离子体形貌随脉冲间隔时间变化的演化规律,结合双脉冲条件下获得的光谱信息,确立碳元素的最佳脉冲间隔时间为1 900 ns。其次,研究了氩气吹扫条件和氩气气室条件对碳元素光谱信号强度的影响。氩气气室能够有效屏蔽空气中二氧化碳的影响,从而提高合金钢中碳元素分析的准确性。最后,采用内标法对合金钢样品中的碳元素进行定量分析。与单脉冲得到的结果相比,双脉冲实验条件下,碳元素定标曲线的R2由0.983提升至0.991,检测限由206 μg·g-1提高至110 μg·g-1,共线DP-LIBS技术使合金钢中碳元素检测限提高了1.87倍。恰当的脉冲间隔时间能够有效的提高共线DP-LIBS光谱特性和设备的检测灵敏度,同时双脉冲的二次激发效果可以进一步有效的减弱实验条件波动带来的影响,使定标模型具有更好的线性相关性。     

高效率LD端面抽运准连续355 nm激光器

报道了一台激光二极管（LD）端面抽运Nd：YVO₄晶体腔内倍频和腔外和频相结合的声光调Q准连续355 nm 紫外激光器。采用LD端面抽运双侧翼键合YVO₄基质的Nd：YVO₄晶体,在腔内置入Ⅰ类相位匹配的LiB₃O₅（LBO）晶体进行倍频实现1 064 nm和532 nm双波长准连续激光输出,通过消色差透镜将双波长激光聚焦耦合到Ⅱ类相位匹配的LBO 晶体中进行和频,并采用双向和频光路,获得了高效率、高光束质量、高重复频率的准连续355 nm 紫外激光输出。在抽运功率为28.6 W、重复频率为20 kHz时,355 nm激光最大输出功率4.2 W,脉宽为20.6 ns,光-光转换效率为14.7%,激光器光束质量因子M_x²和M_y²分别为1.29和1.23。     

上转换发光量子点

光子上转换是一种重要的非线性反斯托克斯发光现象,在激光、显示、光伏、信息安全以及生物成像与诊疗等领域具有应用前景.与研究较多的有机分子三重态-三重态湮灭和稀土掺杂纳米颗粒上转换发光材料相比,上转换量子点可以在宽光谱激发范围内实现上转换发光,具有频谱吸收宽、发光效率高、近红外可吸收、能带可调、尺寸小以及稳定性高等特点,引...     

二氨基马来腈共聚合改性氮化碳光催化剂

利用二氨基马来腈(DMNA)与二聚氰胺(DCDA)的高温共聚合反应, 制备了石墨相氮化碳 (g-C₃N₄), 并通过X射线衍射(XRD)、傅里叶变换红外(FT-IR)光谱、透射电镜 (TEM)、氮气吸脱附实验 (N₂-sorption)、电子顺磁共振 (EPR)、紫外-可见漫反射光谱 (UV-Vis DRS) 和荧光 (PL) 光谱等表征手段,系统考察了共聚合改性对g-C₃N₄晶体结构、化学结构、能带结构、织构、光吸收性能和光催化性能等的影响.研究结果表明:共聚合改性后氮化碳材料仍保持石墨相晶体结构, 但其π电子的离域性增强, 并在催化剂表面产生异质结构, 进而提高了氮化碳在可见光区域的光吸收性能, 并促进了光生载流子的有效分离. 性能评价结果显示, DMNA改性的氮化碳在可见光下光催化产氢活性明显高于未改性的样品, 当DMNA用量为0.01g时, 催化剂的产氢速率最高, 达到45.0 μmol·h^-1, 为纯氮化碳样品的4.5倍.     

酰肼类抗结核病药物的3D-QSAR研究

采用三维全息原子场作用矢量(3D-HoVAIF)对115个酰肼类抗结核病药物进行定量构效关系(QSAR)研究.运用多元线性回归(MLR)和偏最小二乘回归(PLS)建模,同时采用内部及外部双重验证的办法对所得模型稳定性能进行了深入分析和检验.MLR建模和PLS建模的复相关系数(R2cum)、留一法交互校验复相关系数(Q2LOO)以及外部样本校验复相关系数(Q2ext)分别为0.766、0.663、0.748和0.733、0.614、0.715.结果表明,3D-HoVAIF能较好表征抗结核药物分子结构信息,所建QSAR模型具有良好稳定性和预测能力,为抗结核病药物的研发提供一定的理论基础.     

Conceptual design of an intense positron source based on an LIA

Accelerator based positron sources are widely used due to their high intensity. Most of these accelerators are RF accelerators. An LIA (linear induction accelerator) is a kind of high current pulsed accelerator used for radiography. A conceptual design of an intense pulsed positron source based on an LIA is presented in the paper. One advantage of an LIA is its pulsed power being higher than conventional accelerators, which means a higher amount of primary electrons for positron generations per pulse. Another advantage of an LIA is that it is very suitable to decelerate the positron bunch generated by bremsstrahlung pair process due to its ability to adjustably shape the voltage pulse. By implementing LIA cavities to decelerate the positron bunch before it is moderated, the positron yield could be greatly increased. These features may make the LIA based positron source become a high intensity pulsed positron source.