合成介孔纳米晶体氧化锆的新方法(英文)

通过一种新颖的方法,即软模板-固液技术(CSSL)合成具有高比表面积的介孔纳米晶体氧化锆.首先,通过软模板法以1-十六烷基-3-甲基咪唑溴(C16mim+Br-)为结构导向剂,硫酸锆为无机前驱物合成了介观相氧化锆杂化物,然后该杂化物与固体硝酸铜无机盐研磨并进行热处理.在600℃焙烧后所得到的氧化锆材料具有蠕虫状介孔结构,且孔壁由尺寸约为2.50nm的四方相氧化锆纳米粒子组成.该材料的比表面积为240.0m2·g-1,孔径为4.10nm.与之对应,使用单一的软模板法在相同的温度焙烧后,所得到的氧化锆材料介孔结构坍塌,比表面积仅为9.5m·2g-1.     

有限元仿真兰姆波评价胶接接头界面弹性模量的研究

金属薄板检测中,声-超声检测方法可激发多模式的兰姆波,兰姆波能够评价金属胶接后结构质量,正确认识兰姆波传播特性与胶接接头弹性模量的关系是有效应用该技术的基础。本文采用有限元仿真法分析这种关系,得出随着胶层弹性模量的降低,各模式兰姆波通过胶接接头后能量有不同程度的衰减,频率为0.5 MHz和1 MHz时,兰姆波主要模式A₀、S₀能量值与接头弹性模量具有一定的线性关系。实验结果表明,低频时随着胶接接头的人工老化,接头中主要模式兰姆波能量均发生一定程度的衰减,其能量变化曲线与有限元仿真结果趋势一致。本方法能为实验研究、实际检测提供有效参考依据。     

铁基超导体Minimum模型中的d波和扩展s波

对比研究了Minimum模型中d-波配对和扩展s-波配对的基本性质.结果表明,超导序参量按类BCS关系随温度变化,重整化参数t对超导有抑制作用,当t足够大时,超导消失,系统进入正常金属相.此外,讨论了超导序参量随不同参量的变化关系.对于d波,系统有稳定态;而对于扩展s波,系统则没有稳定态.     

基于ST7单片机的液体电导率传感器

基于ST7LITEF15B单片机研制了用于实验教学的低成本液体电导率传感器. 介绍了测试方案、系统的硬件结构和软件的设计思路,进行了典型标样的测量实验,结果表明该液体电导率传感器的研制是成功的.     

Time-Resolved Photoluminescence Spectra of Porous Si

Ｔｉｍｅ－ＲｅｓｏｌｖｅｄＰｈｏｔｏｌｕｍｉｎｅｓｃｅｎｃｅＳｐｅｃｔｒａｏｆＰｏｒｏｕｓＳｉＦＥＩＨａｏ－ｓｈｅｎｇ，ＨＡＮＬｉ，ＣＨＥＹａｎ－ｌｏｎｇ，ＮＩＥＲｕｉ－ｊｕａｎａｎｄＬＩＴｉｅ－ｊｉｎ（ＤｅｐａｒｒｍｅｎｔｏｆＰｈｙｓｉｃｓａｎｄＤ...     

微波常压法制备三聚氰酸

研究了在常压条件下尿素与助溶剂通过微波辐射制备三聚氰酸的反应条件，结果表明，采用594W微波辐射3min，转化率达83．5％。     

静态顶空/气相色谱-质谱法同时测定化妆品中22种有毒挥发性有机溶剂残留

以2015版《化妆品安全技术规范》中规定的常见禁用及限用有毒挥发性有机溶剂为研究对象,建立了静态顶空/气相色谱-质谱法(SHS/GC-MS)同时测定化妆品中22种有毒挥发性有机溶剂(VOC)(二氯甲烷、顺式-1,2-二氯乙烯、反式-1,2-二氯乙烯、2-氯-1,3-丁二烯、三氯甲烷、1,2-二氯乙烷、苯、四氯化碳、三氯乙烯、甲苯、四氯乙烯、氯苯、乙苯、三溴甲烷、间二甲苯、对二甲苯、苯乙烯、邻二甲苯、异丙苯、1,4-二氯苯、1,2-二氯苯、六氯丁二烯)残留的检测方法。试样在80℃下30 min静态顶空,经DB-1柱分离后,采用选择离子监测模式(SIM)进行定性定量分析。优化了顶空、色谱和质谱参数,结果表明:22种VOC在0.5~50 ng/m L浓度范围内均呈良好的线性关系,相关系数均大于0.99,在1.0,2.0,5.0 ng/m L 3个浓度加标水平下的平均回收率为80.3%~102.7%,相对标准偏差(RSD,n=6)为6.4%~9.9%,检出限为0.2~5.0 ng/g。结果表明,该方法简便、灵敏、准确,具有良好的重现性和稳定性,适合于化妆品中22种VOC残留的筛查和确证检测。     

Hydrothermal Synthesis and Crystal Structure of a Novel Hexanuclear Copper（Ⅱ） Complex：[Cu_6（DPPZ）_4（btc）_4（H_2O）_8]·5H_2O

A new hexanuclear copper(Ⅱ) complex,[Cu 6 (DPPZ) 4 (btc) 4 (H 2 O) 8 ]·5H 2 O (1,DPPZ=dipyrido[3,2-a:2,3-c]phenazine,H 3 btc=1,3,5-benzenetricarboxylic acid),has been hydrothermally synthesized and structurally characterized by X-ray single-crystal diffraction,elemental analyses,IR,and thermogravimetric analysis.Its crystal structure is of triclinic system,space group P1 with a=12.489(4),b=14.234(5),c=14.484(5),α=82.848(4),β=79.399(4),γ=73.646(4)°,V=2421.2(13) 3,Z=1,Cu 6 C 108 H 78 N 16 O 37,M r=2573.17,D c=1.752 g/cm 3,μ=1.398 mm-1,F(000)=1308,GOOF=1.011,the final R=0.0495 and wR=0.1030 for 5420 observed reflections with I > 2σ(Ⅰ).In 1,four btc 3ligands act as bridges between six neighboring Cu atoms to form an unusual hexanuclear copper cluster.The clusters are further connected by two types of O-H···O and O-H···N hydrogen bonds,generating a three-dimensional supramolecular structure.In addition,intermolecular and intramolecular π-π stacking interactions further consolidate the three-dimensional supramolecular framework of 1.     

Glucose oxidase as a blocking agent-based signal amplification strategy for the fabrication of label-free amperometric immunosensors

An effective electrochemical signal amplification strategy based on enzyme membrane modification and redox probe immobilization was proposed to construct an amperometric immunosensor.L-cysteine@ferrocene functionalized chitosan,which possessed not only efficient redox-activity but also excellent film-forming ability,was coated on the bare glass carbon electrode. Moreover,the thiol groups(SH)in the ferrocenyl compound were used for gold nanoparticles immobilization via the strong bonding interaction,which co...     

Numerical study on scanning radiation acoustic field in formations generated from a borehole

The directivity of acoustic transducers used in conventional acoustic logging tools is uncontrollable[1,2], which inevitably affects investigation depth and resolution. At present, deep and wide range of investigation in petroleum exploration is urgently re- quired. It is important to improve the exploration capability to find more complex and fine reservoirs[3], for which the direction of the radiated acoustic energy is a direct factor. Acoustic field in the formations generated by the source…