Experimental and numerical investigation of aramid fibre reinforced laminates subjected to low velocity impact

The low velocity impact performance of domestic aramid fibre reinforced laminates is investigated experimentally and numerically. Laminates with different thicknesses are impacted by drop-weight test machine under different impact energies. The time histories of impact force are recorded and ultrasonic C-scan technology is used to inspect the internal damage of the laminates. Numerical simulation is conducted using finite element method (FEM), taking into account both intralaminar and interlaminar damage. The intralaminar damage model is based on the continuum damage mechanics (CDM) approach, which consists of the strain-based Hashin failure criteria and the exponential damage evolution law, and considers the nonlinear shear behaviour of the material. The interlaminar damage is simulated by interface elements with cohesive zone model. The numerical results show good agreements with the experiments, thus verifying the validity of the presented numerical model.     

Experimental Study of Liquid Hydrocarbons Pyrolysis to Acetylene in H2/Ar Plasma

Liquid hydrocarbons including n-hexane, cyclohexane and toluene are pyrolyzed in H₂/Ar plasma to investigate the effects of feedstock properties and key operating conditions (e.g., the feedstock specific input power and residence time) on the reaction performance. The experiments verify that the non-aromatic hydrocarbons show better chemical reactivity than partially aromatic substances. Meanwhile, the straight-chain alkanes and cycloalkanes have better yields of ethylene during the pyrolysis. The results also demonstrate that the pyrolysis reactions are almost completed within the first 0.8?ms in Ar/H₂ plasma independent of the feed substances (i.e., liquid hydrocarbons), where the increased feedstock specific input power enhances the reactant conversions and correspondingly raises the yields of acetylene. At a feedstock specific input power of 4.7?×?10⁴?kJ/kg, the n-hexane conversion is over 90?% and the yield of acetylene reaches 70?%. In addition, when using n-hexane as the feedstock, very little coke is formed during the course of reaction. Comprehensive comparisons of the current experiments with the data reported in the literature are made to point out the key influencing factors, i.e., the effective mass ratio of C/H (R _C/H) in the gaseous phase and the quench temperature. Both two factors would need to be enhanced in order to get a better performance. Finally, the improvements on the specific energy requirement of this process are discussed.     

分子印迹聚合物膜修饰电极的制备及在香草醛测量中的应用

以香草醛为模板分子,采用光引发聚合法和电化学聚合法分别在电极表面合成了香草醛印迹聚合物,探讨了两种方法的印迹、洗脱及电极再生机理。研究了香草醛在两种电极上的吸附行为,结果表明两种电极均可对香草醛进行吸附富集并进行线性扫描伏安法测定。两种电极均有很好的选择性、稳定性,且各有特点。     

Synthesis,Crystal Structure,and Biological Activity of 4-Chlorobenzaldehyde (2-trifluoromethylTrifluoromethyl-5,6,7,8-tetrahydrobenzo[4 ,5]-thieno[2,3-d]pyrimidin-4-yl)hydrazone Monohydrate

The novel title compound 4-chlorobenzaldehyde (2-trifluoromethyl-5,6,7,8- tetrahydrobenzo[4,5]thieno[2,3-d]pyrimidin-4-yl)hydrazone monohydrate (C18H14ClF3N4SH2O, Mr = 428.86) has been synthesized by a condensation reaction of 4-chlorobenzaldehyde with (2-trifluoromethyl-5,6,7,8-tetrahydrobenzo[4,5]thieno[2,3-d]pyrimidin-4-yl)hydrazine, and its crystal structure was determined by single-crystal X-ray diffraction. The crystal belongs to monoclinic, space group P21/c with a = 7.4252(7), b = 26.344(2), c = 10.3095(9) , = 109.407(2)°, V = 1902.0(3) 3 , Z = 4, Dc = 1.498 g/cm3 , μ = 0.356 mm-1 , F(000) = 880, the final R = 0.0564 and wR = 0.1681 for 2343 observed reflections with I > 2 (I). X-ray diffraction analysis reveals that the title hydrazone molecule is nearly planar except for the cyclohexene and trifluoromethyl moieties. In the crystal packing, the molecules form stacks by a three-dimensional framework, which results from intermolecular N(3)-H(3)···O(1), O(1)-H(1B)···N(2), O(1)- H(1B)···N(4) and O(1)-H(1A)···F(1) hydrogen bonds via water molecules together with π-π stacking interactions. Molecular geometry of the title compound in the ground state optimized by B3LYP functional with 6-311G** basis sets indicates that the calculations are in agreement with the experimental data. The preliminary bioassay suggested that the title compound exhibits relatively good fungicidal activity against Fusarium oxysporium f.sp.vasinfectum and Dothiorella gregaria.     

Designed Construction of SrTiO3/SrSO4/Pt Heterojunctions with Boosted Photocatalytic H2 Evolution Activity

Efficient separation of photogenerated electron–hole pairs is a crucial factor for high-performance photocatalysts. Effective electron–hole separation and migration could be achieved by heterojunctions with suitable band structures. Herein, a porous SrTiO₃/SrSO₄ heterojunction is prepared by a sol-gel method at room temperature followed by an annealing process. XRD characterization suggests high crystallinity of the heterostructure. A well-defined interface between the two phases is confirmed by high-resolution (HR)TEM. The photocatalytic H₂ evolution productivity of the SrTiO₃/SrSO₄ heterojunction with Pt as co-catalyst reaches 396.82 μmol g⁻¹ h⁻¹, which is 16 times higher than that of SrTiO₃/Pt. The boosted photocatalytic activity of SrTiO₃/SrSO₄/Pt can be ascribed to the presence of SrSO₄, which promotes the transfer and migration of photogenerated carriers by forming the heterojunction and porous structure, which provides a large amount of active sites. This novel porous heterostructure brings new ideas for the development of high-efficiency photocatalysts for H₂ release.     

Synthesis of TiO2 based on hydrothermal methods using elevated pressures and microwave conditions

Titanium dioxide (TiO₂), especially in its anatase form, is an effective photocatalyst under ultraviolet (UV) light. The particle size of TiO₂ is a critical factor to determine its photoactivity based on its quantum effectiveness under light irradiations. Thus, nanocrystalline TiO₂ has been widely accepted to significantly enhance this effect. The sol–gel method is generally used to synthesize the anatase form of nanocrystalline TiO₂. In this study, we expanded the synthesis method of TiO₂ to high pressures under direct heating (hydrothermal method) and indirect heating (microwave-assisted method). It was found that pH value is one of the major factors to control nano-sizes of TiO₂ particles, and the neutral condition in all methods is preferable for controlling the sizes of the prepared TiO₂ particles. The microwave-assisted method further improves quality of synthesized nano-size TiO₂ below 10 nm. These results have been confirmed by both the direct size measurement using TEM images and indirect determination using XRD peaks. The collected samples are further analyzed using UV–Vis spectroscopy to identify the particle size-dependent photoreactivity and to confirm the effectiveness of microwave-assisting under neutral conditions. DSC is also a powerful tool to identify the crystalline transition of TiO₂.     

Nucleophilic imidoesterification of dicarbonyl compounds with cyanatobenzenes through C-C bond formation

Under neat conditions,an efficient method for synthesis of imidoesters has been developed using cyanatobenzenes and dicarbonyl compounds.Nucleophilic addition spontaneously occurred between the two kinds of materials at room temperature with yields of up to 90%.A mechanism directed towards to the imidoester formation has been proposed.