Electrochemical Characteristics of Mg0.9Ti0.1-xZrxNi （x=0.02, 0.04, 0.06） Alloys

Mg-based hydrogen storage alloys Mg0.9Ti0.1-xZrxNi (x=0.02, 0.04, 0.06) were successfully prepared by means of mechanical alloying (MA). The effects of Zr addition on the discharge capacity and the cycle performance of the Mg-based electrodes were also studied. It was found that the discharge capacities were improved with addition of a small amount of Zr and the cycle performances of the alloy were stabilized with the addition of Ti. The effects of surface modification or coating on the properties of Mg0.9Ti0.06Zr0.04Ni were also studied. The results indicated that coating with graphite improved both the discharge capacity and cycle life of the amorphous Mg0.9Ti0.06Zr0.04Ni electrode.     

新型水溶性膦铑络合物催化烯烃的氢甲酰化反应研究

新型水溶性膦铑络合物催化烯烃的氢甲酰化反应研究燕远勇，左焕培，金子林（大连理工大学化工学院，大连１１６０１２）关键词烯烃，水溶性膦铑络合催化剂，氢甲酰化，醛．１．前言为克服催化剂的流失和与反应产物的分离困难，近年来均相催化的一个重要进展是开发了以磺化...     

Cl+C2H6→HCl+C2H5反应的准经典轨线研究

用三原子模型的准经典轨线方法研究了Ｃｌ与Ｃ２Ｈ６（ｖ＝０，ｊ）的反应。计算结果表明，反应产物ＨＣｌ的角度分布基本上为各向同性，其振动分布处于基态，与实验结果相一致。对反应轨线的研究表明，该反应为一直接反应，而且反应碰撞在低及高的碰撞参数下的机理不一样，在低碰撞参数下反应碰撞是直接完成的，产物ＨＣｌ以向后散射为主，转动基本上是冷的，但比高碰撞参数下的热。在高的碰撞参数下则生成短寿命的碰撞复合物，产物     

Preparation, phase transformation and photocatalytic activities of cerium-doped mesoporous titania nanoparticles

Cerium-doped mesoporous TiO₂ nanoparticles with high surface area and thermal stable anatase wall were synthesized via hydrothermal process in a cetyltrimethylammonium bromide (CTAB)/Ti(SO₄)₂/Ce(NO₃)₄/H₂O system. The obtained materials were characterized by XRD, FESEM, HRTEM, FTIR spectroscopy, nitrogen adsorption and DRS spectra. Experimental results indicated that the doping of cerium not only increased the surface area of mesoporous TiO₂ nanoparticles, but also inhibited the mesopores collapse and the anatase-to-rutile phase transformation. Moreover, the undoped, doped anatase mesoporous nanoparticles exhibit higher photocatalytic activity than commercial photocatalyst (Degussa, P25), but the maximum photodegradation rate corresponds to the undoped mesoporous TiO₂ nanoparticles. The lower photocatalytic activities of cerium-doped samples compared with undoped one may be ascribed to that the doped cerium partially blocks titania's surface sites available for the photodegradation and absorption of Rhodamine B (RB).     

16-脱氢孕烯醇酮醋酸酯的环境友好合成法

Instead of environmentally toxic chromium oxidant, singlet oxygen generated photcchemically was used as environmentally friendly and benign oxidizing agent to accomplish the transformation of pseudodiosgenin diacetate to diosone efficiently in a low toxic and less expensive solvent acetone. Accordingly 16-dehydropregnenolone acetate(16-DPA), an important intermediate for preparation of steroidal drugs, was prepared in good yield (75%) when photoreaction was run in acetone/acetic anhydride/pyridine system. The mild reaction condition as well as simple and environmentally friendly process made the method commercially viable and important for production of 16-DPA in industrial scale.     

Study on interaction between drug and membrane by using liposome coated zirconia-magnesia chromatography

The interactions between drug molecules and membrane were studied using the new chromatography stationary phase of liposome coated zirconia–magnesia. log K_s(ZrO₂–MgO) on this new chromatography for some drugs, compared with that on liposome coated silica chromatography and other reported data, fair correlations were observed between them when excluding effect of special adsorption. log K_s(ZrO₂–MgO) values for barbitalum, diazepam, benzene, benzocaine and toluene correlated well with corresponding values on liposome coated silica chromatography (R = 0.99778, P < 0.001; R = 0.98229, P < 0.003; R = 0.9985, P < 0.0001; R = 0.99925, P < 0.0001, pH value of mobile phase at pH 7.4, 7.0, 6.4 and 5.4, respectively). They also correlated well with the literature data on immobilized artificial membrane chromatography (R = 0.99999, P < 0.004 at pH 7.4) and liposome chromatography (R = 0.99994, P < 0.008) for procaine, lidocaine and bupivacaine. Liposome coated zirconia–magnesia chromatography can thus be used for studying drug–membrane interaction and prediction of drug absorption as another liposome chromatography method.     

水杨酸-2’-乙基己基酯在胶束中的增溶位点

考察了阳离子、非离子和阴离子表面活性剂存在下水杨酸-2’-乙基己基酯(EHS)的吸收光谱和激发态分子内质子转移(ESIPT)荧光光谱. 结果表明, EHS可增溶在胶束中, 2’-乙基己基碳链朝向胶束内核, 而水杨酸基朝向胶束-水界面; 胶束环境有利于EHS分子对紫外光的吸收和分子内氢键的形成, 从而使ESIPT 荧光显著增强, 激发态分子以发射可见光和非辐射去活化方式衰减; 并根据EHS和表面活性剂分子的结构和大小, 解释了EHS分子在胶束中的结合位点, 荧光猝灭和酯水解的光谱测量进一步为此结合位点提供了佐证.     

Simultaneous Determination of Enalapril and Enalaprilat in Human Plasma by LC-MS: Application to a Bioequivalence Study

A rapid, simple and specific liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) method has been developed and validated for the simultaneous determination of enalapril and its major active metabolite enalaprilat in human plasma. Benazepril hydrochloride was used as the internal standard. Plasma was deproteinized with acetone and centrifuged. The supernatant was transferred and evaporated to dryness and the residue dissolved in mobile phase. Samples were separated on a C18 column with a mobile phase of methanol–20 mM ammonium acetate (53:47, v/v) containing 0.15% trifluoracetic acid (v/v) with a pH of 3.0. Enalapril, enalaprilat and the internal standard were measured by electrospray positive selective ion monitoring mode. The method was validated over a linear range of 1.56–400 ng mL⁻¹ and the limits of quantification were 1.56 ng mL⁻¹ for both enalapril and enalaprilat using 0.1 mL plasma. Extraction efficiency was more than 84% and recoveries were in range of 93.65–101.17%. The intra-day relative standard deviations (RSD) were less than 8.16 and 7.05% and inter-day RSDs were within 8.42 and 5.72% for enalapril and enalaprilat, respectively. The storage stability of QC samples was investigated under various conditions. The method was successfully applied for the evaluation of the pharmacokinetics and bioequivalence of enalapril and enalaprilat in 20 healthy volunteers after an oral dose of 20 mg enalapril maleate.     

Sensitive Voltammetric Response of p‐Nitroaniline on Single‐Wall Carbon Nanotube‐Ionic Liquid Gel Modified Glassy Carbon Electrodes

An ionic liquid (i.e., 1‐butyl‐3‐methylimidazolium hexafluorophosphate, BMIMPF₆)‐single‐walled carbon nanotube (SWNT) gel modified glassy carbon electrode (BMIMPF₆‐SWNT/GCE) is fabricated. At it the voltammetric behavior and determination of p‐nitroaniline (PNA) is explored. PNA can exhibit a sensitive cathodic peak at ?0.70 V (vs. SCE) in pH 7.0 phosphate buffer solution on the electrode, resulting from the irreversible reduction of PNA. Under the optimized conditions, the peak current is linear to PNA concentration over the range of 1.0×10^?8–7.0×10^?6 M, and the detection limit is 8.0×10^?9 M. The electrode can be regenerated by successive potential scan in a blank solution for about 5 times and exhibits good reproducibility. Meanwhile, the feasibility to determine other nitroaromatic compounds (NACs) with the modified electrode is also tested. It is found that the NACs studied (i.e., p‐nitroaniline, p‐nitrophenol, o‐nitrophenol, m‐nitrophenol, p‐nitrobenzoic acid, and nitrobenzene) can all cause sensitive cathodic peaks under the conditions, but their peak potentials and peak currents are different to some extent. Their peak currents and concentrations show linear relationships in concentration ranges with about 3 orders of magnitude. The detection limits are 8.0×10^?9 M for p‐nitroaniline, 2.0×10^?9 M for p‐nitrophenol, 5.0×10^?9 M for o‐nitrophenol, 5.0×10^?9 M for m‐nitrophenol, 2.0×10^?8 M for p‐nitrobenzoic acid and 8.0×10^?9 M for nitrobenzene respectively. The BMIMPF₆‐SWNT/GCE is applied to the determination of NACs in lake water.     

Electronic structures of 4d transition metal monoxides by density functional theory

Bond distances, dissociation energies, ionization potentials and electron affinities of 4d transition metal monoxides from YO to CdO and their positive and negative ions were studied by use of density functional methods B3LYP, BLYP, B3PW91, BPW91, B3P86, BP86, SVWN, MPW1PW91 and PBE1PBE. It was found that calculated properties are highly dependent on the functionals employed, especially for dissociation energy. For most neutral species, pure density functionals BLYP, BPW91 and BP86 have good performance in predicting dissociation energy than hybrid density functionals B3LYP, B3PW91 and B3P86. In addition, BLYP gives the largest bond distance compared with other density functional methods, while SVWN gives shortest bond distance, largest dissociation energy and electron affinity. For the ground state, the spin multiplicity of the charged species can be obtained by ± 1 of their corresponding neutral species.