Single Mode Er-Doped π-Phase-Shifted Distributed Feedback Fibre Grating Laser

A novel method incorporating the shielded method and the post-processing method has been proposed to fabricate the π-phase-shifted fibre grating. Then an Er-doped π-phase-shifted distributed feedback fibre grating laser has been fabricated using the grating. The laser threshold is 20mW. When pumped with 90mW light at 980nm, the laser gives an output of 1.1mW. Its signal-to-noise ratio is better than 60dB. It is demonstrated that the laser is single mode operation by means of a Fabry--Perot scanning interferometer.     

(1,2-(1H-1,2,4-三唑))乙烷的一维双链Cu(Ⅱ)配合物合成与表征(英文)

利用高度柔性的双三唑配体(1,2-(1H-1,2,4-三唑))乙烷(L)和铜盐反应合成了1个新的具有一维双链结构的铜(Ⅱ)配合物{[Cu(cis-L)2Br]Br.2H2O}n(1)。单晶结构表明:配合物1的晶体属于三斜晶系,P1空间群。在配合物1中双三唑配体采用反式构型,桥联相邻的中心铜离子形成一维双链结构,晶格中游离的Br原子同配位水分子形成了四元环状的Br…O超分子环。测定了配合物1在2～300 K的变温磁化率,结果表明相邻铜离子间存在弱的反铁磁相互作用。     

双色反射技术在温度测量上的应用

本文以铁镍合金为例,介绍了一种测量金属表面温度的光学测量方法。试验以黑体为反射辐射源,采用FTIR光谱辐射计测量了试样在中温状态的发射辐射以及包含了黑体反射能量的有效辐射。通过建立包含反射辐射的方程组,并运用MATLAB内建的求根模型求解得到了试样表面温度。     

HL—1装置等离子体辐照Tic涂层实验分析

一、引言在聚变等离子体中控制杂质的污染被认为是获得高温等离子体的重要问题之一。因此对材料要进行优化选择,例如石墨和碳就是目前有利的孔栏材料和结构材料。但是由于碳的自溅射作用和化学活性,在高温溅射时可形成易挥发的碳化物,如甲烷等从而增加了化学腐蚀。某些含碳的化合物如TiC,SiC和BC以及氮化物如TiN和Si_3N_4等是目前研究的一些有用途的材料。实际上TiC或TiN已经用于孔栏,壁内衬涂层或高频加热天线。     

高速转发引擎设计分析与实现

高速转发引擎是核心路由器设计中的重要难点和关键技术,基于FPGA技术,分析了高速转发引擎设计中的挑战,并给出了一种基于并行流水线机制的10Gbps转发引擎设计方案.     

Particle Simulation of Relativistic Laser Pulse Density Channeling

Two-dimensional particle simulation is carried out to study the interaction between a high-intensity finite-size spot laser beam and a plasma with linear density profile. The laser is allowed to propagate in underdense corona until it is cut off near the critical surface. The intense laser can drive various instabilities through particle collective motion and result in electron heating,while relativistic effect and ponderomotive force can bring strong energy absorption and electron heating in the overdense region. As the laser beam is nonuniform in the transverse direction,a density channel forms and hole boring effect occurs as a result of strong ponderomotive force pushing particle outwards. These processes can be investigated well by particle simulation.     

多元体系中谐波对EXAFS振幅的影响

本文给出了多元体系中谐波对EXAFS振幅的影响的计算方法,并以实例计算和测量了这种影响,两者结果相符。 关键词：     

利用部分采样点以及幅度谱恢复离散信号

关于利用幅度谱以及一部分时域采样点来恢复整个离散信号的唯一性问题,本文提出了三个定理,并讨论了实现这种恢复的几种数值算法。在此基础上,本文提出了一种新的算法。实例表明,这种新算法对于保证迭代收敛,效果是显著的。     

第三型伯恩斯坦插值过程的双结点修正

In this work,the well-known problem put forward by S N Bernstein in 1930 is studied in a deep step.An operator is constructed by revising double interpolation nodes.It is proved that the operator converges to arbitrary continuous functions uniformly and the convergence order is the best.     

Syntheses of chiral 1,3-disubstituted tetrahydro-β-carbolines via CIAT process: highly stereoselective Pictet–Spengler reaction of d-tryptophan ester hydrochlorides with various aldehydes

A highly stereoselective Pictet–Spengler reaction of d-tryptophan methyl ester hydrochloride 1-HCl with various aldehydes via a CIAT (crystallization-induced asymmetric transformation) process is described. It was revealed that the CIAT process should be performed in a mixed solvent of nitromethane and toluene, and a fine tuning of the ratio of nitromethane and toluene for each epimer mixture of 2-HCl was necessary in order to get as high yields and stereoselectivities as possible. Enantiomerically pure cis (or trans) 1,3-disubstituted tetrahydro-β-carbolines 2a–2v were obtained by recrystallization or flash chromatography after neutralization of the corresponding hydrochloride salts cis-2-HCl or trans-2-HCl.