AlGaN-Based Solar-Blind Schottky Photodetectors Fabricated on AlN/Sapphire Template

We report AlGaN-based back-illuminated solar-blind Schottky-type ultraviolet photodetectors with the cutoff- wavelength from 280nm to 292nm without bias. The devices show low dark current of 2.1× 10^-6A/cm^2 at the reverse bias of 5 V. The specific detectivity D＊ is estimated to be 3.3 × 10^12cmHz^1/2 W^-1 . To guarantee the performance of the photodetectors, the optimization of AlGaN growth and annealing condition for Schottky contacts were performed. The results show that high-temperature annealing method for Ni/Pt Schottky contacts is effective for the reduction of leakage current.     

The design and artificial realization of a controller of pulse coupling feedback

In this paper a controller of pulse coupling feedback (PCF) is designed to control chaotic systems. Control principles and the technique to select the feedback coefficients are introduced. This controller is theoretically studied with a three dimensional (3D) chaotic system. The artificial simulation results show that the chaotic system can be stabilized to different periodic orbits by using the PCF method, and the number of the periodic orbits are 2ⁿ× 3^mp (n and m are integers). Therefore, this control method is effective and practical.     

3种现场快速水质检测仪的性价对比

选择了市场上口碑好、占有率高的3款便携式水质现场应急检测设备,通过准确度、精密度、检测时长及价格等指标,以权重积分法对3款仪器进行了比选,结果表明德国MN公司的PF-12型便携式多参数分光光度计的综合性能最优.     

铝、铜、镍三元合金系中τ相的晶体结构变迁

A thorough investigation by means of X-rays has been carried out with the purpose to determine the nature of the ternary phase τ in Al-Cu-Ni alloys. In contrast with the conventional concept of alloy phase which is characterized by a definite type of crystal structure, systematic structure changes are found in the single phase field of τ which occupies quite an extensive area in the isothermal section of the phase diagram at room temperature. There are eight types of structures altogether, all derived from a basic rhombohedron with corners occupied by Al atoms and centres either occupied by the heavy atoms or remaining vacant. The basic rhombohedron is the building stone in the crystal architecture. By transforming the basic rhombohedron into a hexagonal prism in the usual way, all structures may be considered to be built up by stacking together a number of these hexagonal prisms along the triad. The transformation of one structure into another is quite systematic in the way that the number of the stacking stories in the unit cell increases according to the order 10, 11, 12, 13, 14, 15, 16, 17. The atomic arrangements in the different structures are closely related too, in the respect that they are all superstructures due to the presence of ordered vacancies in the rhombohedral centres.The principal factor controlling the formation of these structures has been fully considered. In view of the fact that the change of structure types follows closely with the content of Ni or Cu for alloys of constant Al content, the atomic size factor appears to be unimportant in the formation of these alloys. It has been shown that for alloy phases of the defect lattice type as the r-phase, the most fundamental factor is the average number of valency electrons per structural unit which is the basic rhombohedron in the present case. By assuming Hume-Rothery's valencies, the average number of valency electrons remains remarkably constant throughout the entire phase field, while the electron concentration varies with compositions. It has also been pointed out that for alloy phases where there is no unit cell change, the average number of electrons per structural unit is equivalent to the number of electrons per unit cell, and for alloy phase where there is no defect, this is in effect equivalent to the electron concentration.     

面心立方体金属中间隙原子内耗理论

在面心立方体金属中间隙原子一般不发生内耗。只有在合金元素(杂质)或空穴周围的间隙原子才会发生微扩散的内耗。因为空穴或合金原子的存在破坏了邻近间隙位置的对称性,在这样位置上的间隙原子才有可能在往复应力作用下发生应力感生微扩散内耗。本文按以上所述两种情况,利用作者之一所作的内耗热力学理论作计算,发现由于合金原子存在而引起的内耗弛豫强度应该与x_A(1—x_A)·C成正比,x_A是合金原子浓度,C是间隙原子浓度。由于空穴存在而引起的内耗强度应与N·1/(B/C²+1/C)成正比,此处N是空穴的浓度,C是间隙原子浓度,B是一常数。在葛庭隧、钱知强两氏对面心立方系锰钢的内耗强度的实验中,内耗强度的数值基本上与合金原子浓度无关。因此,在高锰合金钢中像是空穴所引起内耗的那种机构。同时,可以估计出碳原子落入空穴放出的能量约为0.14eV。但目前实验数据有限,实际上面心合金钢中是何种机构在起主要作用,尚待进一步研究。     

ON THE NEUTRINO MASS,THE ABUNDANCE OF RIGHT-HANDED NEUTRINO AND THE CLOSENESS OF THE UNIVERSE

We point out that although the neutrino mass is finite,the left-handed neutrino density still dominates over the righthanded one in the universe unless there exists one or more elementary fernions (quark or lepton) whose mass is larger than 10⁶ GeV. or M_WR/M_WL≤10². (M_WLand M_WR are the left and right handed intermediate boson respectively.If there exists neutrino the mass of which is about 34 ev. as indicated in some experiments, then one can conclude that the total neutrino mass of the universe s,bvld contribute abput 99%. to the whole masses and lead to the closeness of the universe.This conclusion can be brought to the agreement of all observation datd which have been-obtained so far. A mass limit of all species of neutrinos obtained by reexamining all data is ≤ 200 eV.     

在不同温度下球墨鑄铁的冲击性能

本文描述高温冲击实验的技术,以及由-85℃至1070℃的铸态和锻造后的球墨铸铁的冲击性能。研究结果找到了基体主要为铁素体的球墨铸铁的两个变脆温度范围(-20℃以下和550℃至700℃之间)和一个比较具有韧性的温度范围(850℃与1050℃之间)。在这些温度范围内,曾考查试样的断口情况和断裂时的弯曲角度,并与其基体组织的变化相联系,进行讨论。最后,本文指出研究结果在球墨铸铁的应用上所起的作用,以及在球墨铸铁热加工时对于选择热加工温度的意义。     

Mn3Ga的晶体结构

本文用X射线粉末法,测定了Mn₃Ga的晶体结构。Mn₃Ga属六角晶系。26.8at.%Ga的合金在20℃的点阵常数是:a=5.4065?,c=4.3537?,c/a=0.8053。空间群为D_6h⁴-P6₃/mmc。每个单胞含两个化合式量,其中6个Mn原子占据6(h)的位置,原子参数x_h=0.837,2个Ga原子占据2(c)的位置。这是一个畸变型的DO₁₉有序密堆积超结构。Mn-Ga采内相当于这个结构的均匀范围并不包括理想成分在内,而偏移在富Ga的一边。     

铜-锗-锡三元系合金相图

本文用X射线衍射法测定了铜-锗-锡三元系合金相图。室温等温截面包含α,ζ,δ,ε₁,ε,η′,Ge,Sn八个单相区,十三个双相(即α+ζ,α+δ,ζ+δ,ζ+ε₁,ε₁+δ,ε₁+ε,δ+ε,ε₁+Ge,ε₁+η′,ε+η′,η′+Ge,η′+Sn,Ge+Sn相区,以及六个三相(即α+ζ+δ,ζ+ε₁+δ,ε₁+δ+ε,ε₁+ε+η′,ε₁+η′+Ge,η′+Ge+Sn)相区。所有单相与三个二元系中的单相一致,没有新相出现。     

铝镁合金中位错的运动与交滑移

本文研究了在电子显微镜的照明电子束作用下,铝镁合金中位错运动与交互作用的行为。螺型位错往往单个运动,并且很容易改变运动方向,产生多次双交叉滑移。滑移和交滑移首先在与膜面接近45°的{111}面上进行,位错的柏氏矢量为接近膜面的α/2<110>,这是与照明电子束所产生的应力与膜面平行一事相符的。运动着的位错可以通过其应变场激活近邻的位错,使之发生运动;亦可能受到其它位错的排斥作用而受阻或改变运动方向。