铁基分子筛活性位点的制备控制及对NH3-SCR活性的影响

采用离子交换法,通过不同制备条件制备Fe-beta分子筛,并探讨不同制备条件对催化剂活性位点和NH3-SCR活性的影响。通过UV-Vis分析,将不同位置的吸收峰归属于不同的铁活性位点,300nm以下的高能谱区可以归属于孤立的Fe3+位点,300nm-400nm间归属于低聚的FexOy簇,而400nm以上为Fe2O3大颗粒聚合物。对比不同催化剂的SCR活性发现,孤立的Fe3+和低聚态的Fe3+是主要的活性位点,这两种物种的所占比例高低直接影响了催化剂的活性。而大尺度的Fe2O3为非活性位点,因尽量控制并降低其所占比例。另外低聚态的Fe3+所占比例越高,N2O的生成量越高,N2的选择性越差。因此,在制备过程中,除了控制大尺度的Fe2O3的含量,同时要尽量降低低聚态的Fe3+的含量,以增加N2的选择性。采用离子交换法制备Fe-beta催化剂,pH、交换温度、前驱体种类、硅铝比、煅烧条件等制备条件会对Fe-beta的活性位点造成影响,从而导致活性差异。根据实际应用需求,调控制备条件,可有效控制活性物种的分布,制备具有高效NH3-SCR活性的铁基分子筛催化剂。     

Stable Thiophene-sulfur Covalent Organic Frameworks for Oxygen Reduction Reaction(ORR)

Exploring novel materials deriving from earth resources to substitute for platinum(Pt) electrocatalyst to promote oxygen reduction reaction(ORR) of fuel cell cathode is very important. Herein, we have exploited two crystallographic thiophene-sulfur covalent organic frameworks(COFs), termed JUC-607 and JUC-608, as electrocatalysts that exhibited good ORR performances. These thiophene-sulfur COFs exhibited high stability, and their functional groups acting as active centers in the ORR can be precisely determined. Notably, due to a larger aperture for mass transfer and electrons transport, JUC-608 displayed a growing electrochemical performance, leading to a better ORR activity. Thus, this study will provide a new strategy for designing heteroatom-based COF materials for high-performance electrochemical catalysis.     

高中化学“次氯酸盐的性质”的项目式教学*——84消毒液的使用指南

以“84消毒液的使用指南”为主题,开展高中化学“次氯酸盐的性质”的教学。学生通过完成“一张图说清消毒剂”“探究84消毒液的漂白效果与酸碱性的关系”“探究84消毒液的漂白效果与光照的关系”“探究84消毒液的漂白效果与温度的关系”“84消毒液与酒精混合会有氯气吗”等5个项目任务,理解了次氯酸盐的性质及漂白原理,培养了学生的文献检索能力、实验探究能力以及发展了学生的高阶思维能力。将文献查阅与学生实验相结合,让学生在真实问题的解决中,完成次氯酸盐的性质等相关知识的内化,是顺利完成本项目教学的关键。     

Ionic/electronic conductivity regulation of n-type polyoxadiazole lithium sulfonate conductive polymer binders for high-performance silicon microparticle anodes

Low-cost silicon microparticles(SiMP),as a substitute for nanostructured silicon,easily suffer from cracks and fractured during the electrochemical cycle.A novel n-type conductive polymer binder with excellent electronic and ionic conductivities as well as good adhesion,has been successfully designed and applied for high-performance SiMP anodes in lithium-ion batteries to address this problem.Its unique features are attributed to the stro ng electron-withdrawing oxadiazole ring structure with sulfonate polar groups.The combination of rigid and flexible components in the polymer ensures its good mechanical strength and ductility,which is beneficial to suppress the expansion and contraction of SiMP s during the charge/discharge process.By fine-tuning the monomer ratio,the conjugation and sulfonation degrees of the polymer can be precisely controlled to regulate its ionic and electronic conductivities,which has been systematically analyzed with the help of an electrochemical test method,filling in the gap on the conductivity measurement of the polymer in the doping state.The experimental results indicate that the cell with the developed n-type polymer binder and SiMP(~0.5 μm) anodes achieves much better cycling performance than traditional non-conductive binders.It has been considered that the initial capacity of the SiMP anode is controlled by the synergetic effect of ionic and electronic conductivity of the binder,and the capacity retention mainly depends on its electronic conductivity when the ionic conductivity is sufficient.It is worth noting that the fundamental research of this wo rk is also applicable to other battery systems using conductive polymers in order to achieve high energy density,broadening their practical applications.     

二硫化锡纳米片阻变存储器的制备与性能

采用水热法合成了尺寸为50~100 nm的二硫化锡纳米片,并首次以二硫化锡作为阻变层材料的阻变存储器（Cu/PMMA/SnS₂/Ag,PMMA=聚甲基丙烯酸甲酯）,对其阻变性能进行了研究。结果表明： Cu/PMMA/SnS₂/Ag阻变存储器的开关比约10⁵,耐受性2.7×10³。在上述2项性能指标达到较优水平的同时,开态与关态电压分别仅约为0.28与-0.19 V。     

Ho-Lee利率模型下多种风险资产的动态投资组合

假设无风险利率可由Ho-Lee利率模型描述,且与股票动态存在一般线性相关系数,应用最优性原理和HJB方程研究了市场存在多种风险资产情形的动态资产分配问题,通过变量替换方法得到了幂效用和指数效用下最优投资策略的显示解,数值算例分析了利率参数和市场参数对最优投资策略的影响趋势。研究结果发现:两种效用下的最优策略均由两部分所构成,一部分由市场参数所确定,另一部分由利率参数所确定。而且,幂效用下的最优投资策略与瞬时利率无关,而指数效用下的最优投资策略与瞬时利率相关。     

LLRF超导腔体控制系统的测试

中国科学院近代物理研究所自主研发的ADS注入器Ⅱ第一代高频低电平(LLRF)控制系统,工作频率为162.5 MHz;LLRF系统是由基于I/Q采样的正交解调技术构成的全数字闭环反馈控制系统,其主要功能是实现超导腔腔体电压幅值稳定控制、相位稳定控制与腔体谐振频率控制;LLRF控制系统在液氦温区超导腔上进行了系统稳定度和性能的在线测试,根据实验数据计算得超导腔体电压幅度稳定度为±3.4‰,相位稳定度为±0.3°,腔体表面峰值电场(Epk)能长时间稳定在25.1 MV/m。通过实验测试,检验了LLRF控制系统的性能,并对测试过程中出现的问题进行了分析,为将来超导腔LLRF控制系统运行积累了经验。     

Highly Enantioselective Ring‐Opening Reactions of Aziridines with Indole and Its Application in the Building of C3‐Halogenated Pyrroloindolines

A magnesium‐catalyzed asymmetric ring‐opening reaction of aziridine with indole has been realized by employing commercially available chiral ligands. Both of the enantiomers of the ring‐opening product could be obtained with good yields and a high level of enantioselectivity. The corresponding ring‐opening product could be further transformed to various types of enantioenriched C₃‐halogenated‐pyrroloindolines.     

Bi_2MoO_6/BiVO_4异质结的水热合成和可见光催化活性(英文)

采用一步水热法制备Bi2MoO6/BiVO4复合光催化剂.利用X射线衍射(XRD)、场发射扫描电子显微镜(FESEM)、高分辨透射电子显微镜(HRTEM)等手段对其晶体结构和微观结构进行了表征.结果表明,Bi2MoO6纳米粒子沉积在BiVO4纳米片表面从而形成异质结结构.紫外-可见漫反射光谱(UV-Vis DRS)表明所制备的Bi2MoO6/BiVO4异质结较纯相Bi2MoO6和BiVO4对可见光吸收更强.由于形成异质结结构及其光吸收性能使Bi2MoO6/BiVO4光催化活性有较大提高.可见光下(λ420 nm)光催化降解罗丹明B(RhB)实验结果表明,Bi2MoO6/BiVO4光催化活性较纯相Bi2MoO6和BiVO4高.Bi2MoO6/BiVO4样品光催化性能提高的原因是Bi2MoO6和BiVO4形成异质结,从而有效抑制光生电子-空穴对的复合,增大了可见光吸收范围及比表面积.     

变温傅里叶红外光谱技术研究硬脂酸C-H伸缩振动

采用傅里叶红外光谱技术研究了温度对于硬脂酸C-H伸缩振动、分子脂肪链构象改变和分子间作用力的影响。运用变温红外技术在293~393K范围内,分别测定了硬脂酸C-H的一维红外光谱、二阶导数红外光谱、四阶导数红外光谱和去卷积红外光谱。结果表明:1在293~333K范围内,一维红外光谱中2 965,2 870cm-1附近的弱吸收谱带分别归属于甲基的不对称伸缩振动模式νas(-CH3)和对称伸缩振动模式νs(-CH3),相应的导数光谱及去卷积红外光谱能提高一维红外谱的分辨率;2在293~333K范围内,硬脂酸脂肪链处于全反式构象,在348~353K范围内,硬脂酸分子脂肪链构象由全反式构象向无序构象转变;3随着测量温度的升高,硬脂酸分子间的作用力不断降低。