Study of Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile for odorant biosensors

To make ultrathin films for the fabrication of artificial olfactory systems, odorant biosensors, we have investigated mixed Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile. Under optimized experimental conditions (phosphate buffer solution, pH 7.5, OBP-1F concentration of 4 mg L(-1), target pressure 35 mN m(-1)), the mixed monolayer at the air/water interface is very stable and has been efficiently transferred onto gold supports, which were previously functionalized by self-assembled monolayers (SAMs) with 1-octadecanethiol (ODT). Atomic force microscopy and electrochemical impedance spectroscopy were used to characterize mixed Langmuir-Blodgett (LB) films before and after contact with a specific odorant molecule, isoamyl acetate. AFM phase images show a higher contrast after contact with the odorant molecule due to the new structure of the OBP-1F/ODA LB film. Non-Faradaic electrochemical spectroscopy (EIS) is used to quantify the effect of the odorant based on the electrical properties of the OBP-1F/ODA LB film, as its resistance strongly decreases from 1.18 MOmega (before contact) to 25 kOmega (after contact).     

Lanthanide luminescence efficiency in eight- and nine-coordinate complexes: Role of the radiative lifetime

The photophysical parameters for the sensitization of metal-centred luminescence are analyzed in two series of complexes with tridentate and hexadentate ligands having N_xO_y chelating units. In particular, the radiative lifetime τ_rad is experimentally estimated for 29 nine-coordinate Eu^III complexes and 10 eight- and nine-coordinate Yb^III complexes. The known dependence of τ_rad on refractive index is substantiated by comparing data for solid-state samples and solutions. Moreover, a clear dependence of τ_rad with the coordination environment is evidenced and in the case of Eu^III, a comparison between τ_rad and the nephelauxetic effect generated by the ligands is attempted. Altogether, this extensive analysis points to the importance of having a handle on τ_rad when designing ligands for highly luminescent lanthanide-containing molecular edifices. This, in turn, should stimulate initiating theoretical considerations to unravel a reliable relationship between τ_rad and the electronic structure of the ligands.     

Enantioselective ketoester reductions in water: a comparison between microorganism- and ruthenium-catalyzed reactions

In the search for green chemistry methods for the enantioselective reduction of ketoesters Saccharomyces cerevisiae- and ruthenium-catalyzed reactions in water have been investigated. The highest enantiomeric excesses for the reduction of α- and β-ketoesters have been obtained by S. cerevisiae. Chiral ruthenium catalysts are active for the reduction of all ketoesters with low to moderate enantioselectivities depending on the nature of the substrate and ligand. Interestingly, for several substrates both enantiomers of the hydroxyesters have been obtained according either to the catalytic method or to the structure of the ligand.     

Chiral diphosphines and diphosphinites derived from 2,2-biphosphole: Stereodynamic ligands for asymmetric catalysis

In this account, the recent advances on chiral stereochemically dynamic 2,2’-biphosphole ligands for applications in asymmetric catalysis are reported. In the first part, the synthesis of stereodynamic diphosphines and diphosphinites derived from 2,2’-biphosphole is presented. The second part describes the kinetic dynamic resolution to give diastereo- and enantiopure complexes. Applications in asymmetric allylic substitution, hydroformylation and hydrogenation are presented in the last part.     

Optimization of a GFAAS method for determination of total inorganic arsenic in drinking water

The new 10 μg l⁻¹ arsenic standard in drinking water has been a spur to the search for reliable routine analytical methods with a limit of detection at the μg l⁻¹ level. These methods also need to be easy to handle due to the routine analyses that are required in drinking water monitoring. Graphite furnace atomic absorption spectrometry (GFAAS) meets these requirements, but the limit of detection is generally too high except for methods using a pre-concentration or separation step. The use of a high-intensity boosted discharge hollow-cathode lamp decreases the baseline noise level and therefore allows a lower limit of detection. The temperature program, chemical matrix modifier and thermal stabilizer additives were optimized for total inorganic arsenic determination with GFAAS, without preliminary treatment. The optimal furnace program was validated with a proprietary software. The limit of detection was 0.26 μg As l⁻¹ for a sample volume of 16 μl corresponding to 4.2 pg As. This attractive technique is rapid as 20 samples can be analysed per hour. This method was validated with arsenic reference solutions. Its applicability was verified with artificial and natural groundwaters. Recoveries from 91 to 105% with relative standard deviation <5% can be easily achieved. The effect of interfering anions and cations commonly found in groundwater was studied. Only phosphates and silicates (respectively at 4 and 20 mg l⁻¹) lead to significant interferences in the determination of total inorganic arsenic at 4 μg l⁻¹.     

Development of miniaturized pH biosensors based on electrosynthesized polymer films

A new type of pH biosensor was developed for biological applications. This biosensor was fabricated using silicon microsystem technology and consists in two platinum microelectrodes. The first microelectrode was coated by an electrosynthesized polymer and acted as the pH sensitive electrode when the second one was coated by a silver layer and was used as the reference electrode. Then, this potentiometric pH miniaturized biosensor based on electrosynthesized polypyrrole or electrosynthesized linear polyethylenimine films was tested. The potentiometric responses appeared reversible and linear to pH changes in the range from pH 4 to 9. More, the responses were fast (less than 1 min for all sensors), they were stable in time since PPy/PEI films were stable during more than 30 days, and no interference was observed. The influence of the polymer thickness was also studied.     

Metalation of cyclic pseudopeptidic thiosulfinates with Ni(II) and Zn(II) after ring opening: a mechanistic investigation

Thiosulfinates are an emerging class of oxidized sulfur species that are frequently supposed to be involved in biochemical processes. Reaction of 12- and 10-membered ring pseudopeptidic thiosulfinates 1a (4,4,7,7-tetramethyl-1,3,4,7,8,10-hexahydro-5,6,1,10-benzodithiadiazacyclododecine-2,9-dione 5-oxide) and 1b (3,3,6,6-tetramethyl-1,8-dihydro-4,5,1,8-benzodithiadiazecine-2,7(3H,6H)-dione 4-oxide) with a Ni(II) salt leads after ring cleavage under alkaline conditions to the isolation of diamidato/thiolato/sulfinato complexes. These two thiolato/sulfinato complexes of nickel, which can also be prepared by dioxygen oxidation of the parent diamidato/dithiolato complexes, were characterized by X-ray crystallography. They show a square-planar geometry with a S-bonded sulfinato ligand. A similar reaction between 1b and a Zn(II) salt leads to a thiolato/sulfinato complex with an O-bonded sulfinate via the intermediate formation of a mixed thiolato/sulfinic ester. On the basis of 1H NMR, IR, and mass analyses, the sulfinic ester in the intermediate is proposed to be O-bonded to the zinc center. Then, an in-depth study of the cleavage of these thiosulfinates with the oxyanions RO- and HO- was performed. This led, after trapping of the open species with CH3I, to the identification of three polyfunctionalized products containing a methyl thioether, with either an isothiazolidin-3-one S-oxide, a methyl sulfone, or a methyl sulfinic ester. All of these products arise from a selective nucleophilic attack at the sulfinyl sulfur, promoted either directly by RO- or HO- or by an internal peptidic nitrogen of the thiosulfinate after deprotonation with RO- or HO-.     

Synthesis and characterization of (E)- and (Z)-3-mercapto-2-propenenitrile. Microwave spectrum of the Z-isomer

The kinetically unstable compound 3-mercapto-2-propenenitrile (HS-CH=CH-C[triple bond]N) has been prepared for the first time by flash vacuum pyrolysis at 800 degrees C of 3-(tert-butylthio)-2-propenenitrile with a yield of 77% and a Z:E ratio of 8:1. Several deuterium and 15N isotopologues were also prepared using isotopically enriched compounds. Quantum chemical calculations of the structural and conformational properties of the Z- and E-isomers were undertaken at the B3LYP/6-311++G(3df,2pd), MP2/6-311++G(3df,2pd), MP2/aug-cc-pVTZ, and G3 levels of theory. These methods all predict that the Z- and the E-forms each have two "stable" planar rotameric forms with the H-S-C=C link of atoms in either a synperiplanar or an antiperiplanar conformation, with the synperiplanar form of the Z-isomer as the global minimum. The Z-isomer has been investigated by means of Stark-modulation microwave spectroscopy. Spectra attributable to the parent and three deuterium-substituted isotopologues of a single conformer were recorded and assigned. Additionally, the spectrum belonging to the first excited state of the lowest bending vibration was assigned. The ground-state rotational constants obtained by the least-squares analysis of these transitions were found to be in excellent agreement with the corresponding approximate equilibrium values generated by the MP2/aug-cc-pVTZ calculations. The preferred conformer of this molecule was found to have a synperiplanar arrangement of the H-S-C=C chain of atoms and a planar or nearly planar geometry, with a stabilizing intramolecular hydrogen bond formed between the H atom of the thiol group and pi-electron density associated with the C[triple bond]N triple bond. The possible astrochemical/astrobiological significance of this compound is discussed.     

Investigation into the factors affecting accuracy of mass measurements on a time-of-flight mass spectrometer using Design of Experiment

The results of an investigation of the parameters which have the most significant effect on the accuracy of mass measurements on a quadrupole orthogonal acceleration time-of-flight mass spectrometer (q-oaToF) are reported. The influence of eight factors is investigated: ion abundances of reference and analyte compounds, mass difference between analyte and reference compounds, quality of calibration, number of reference acquisitions averaged and TDC (time-to-digital converter) settings (resolution, Np multiplier (number of pushes correction factor), minimum number of points, i.e. minimum acquisition width which defines a peak). To extract the maximum information from as few experiments as possible, a Design of Experiment approach was used. The data will be used as a basis for developing guidance on accurate mass measurement on q-oaToF instruments.     

Multiplex sorting of foodborne pathogens by on-chip free-flow magnetophoresis

This study reports multiplex sorting of Salmonella typhimurium and Escherichia coli 0157, from broth cultures and from pathogen-spiked skinned chicken breast enrichment broths by employing microfluidic free-flow magnetophoresis. Magnetic beads of different sizes and magnetite content, namely Dynabeads anti-salmonella and Hyglos-Streptavidin beads together with the corresponding pathogen-specific biotinylated recombinant phages, were utilised as affinity solid phases for the capture and concentration of viable S. typhimurium and E. coli 0157. Following optimisation, the protocol was used to demonstrate continuous magnetophoretic sorting of the two pathogen-bound magnetic bead populations from mixed cultures and from pathogen-spiked chicken pre-enrichment broths under the influence of a Halbach magnet array. For example, in the latter case, a pure population of S. typhimurium-bound Dynabeads (72% recovery) was sorted from a 100 μL mixture containing E. coli 0157-bound Hyglos beads (67% recovery) within 1.2 min in the presence of 0.1% Tween 20. This proof-of-principle study demonstrates how more than one pathogen type can be simultaneously isolated/enriched from a single food pre-enrichment broth (e.g. Universal food enrichment broth).