Sesquiterpenoids from the Rhizome of Ligularia virgaurea

Two novel sesquiterpene dimers, compounds 1 and 2 , were isolated from the rhizome of Ligularia virgaurea, together with the six known sesquiterpenoids 3 – 8 . Their structures were established by physico‐chemical and spectroscopic methods, especially by means of 1D‐ and 2D‐NMR as well as HR‐MS analyses. A mechanism based on a classical Diels–Alder cyclization is proposed for the formation of the dimer 1 from the precursors 8 and the quinone form of 6 (Scheme).     

Photocurrent generation in multilayer self-assembly films fabricated from water-soluble poly(phenylene vinylene)

A novel, water-soluble, cationic PPV derivative poly[(2,5-bis(3-bromotrimethylammoniopropoxy)-phenylene-1,4-divinylene)-alt-1,4-(2,5-bis(2-(2-hydroxyethoxy)ethoxy))phenylene vinylene] (BH-PPV) has been synthesized by a Heck coupling reaction. Multilayered assemblies of the BH-PPV and the sodium salt of hexa(sulfobutyl)fullerenes (C(60)-HS) were fabricated successfully by an alternate deposition technique. The multilayer structures were studied by UV/Vis spectroscopy, small angle X-ray diffraction, and atomic force microscopy. The photoinduced charge transfer property of the self-assembled multilayer film was also measured by a three-electrode cell technique. A steady and rapid cathodic 5.5 microA cm(-2) photocurrent response was measured as the irradiation of the multilayer film was switched on and off. Importantly, the response of on/off cycling is prompt and reproducible. A possible mechanism for the electron-transfer process is proposed.     

Thermodynamics and kinetics of the hydride-transfer cycles for 1-aryl-1,4-dihydronicotinamide and its 1,2-dihydroisomer

Five 1-(p-substituted phenyl)-1,4-dihydronicotinamides (GPNAH-1,4-H(2)) and five 1-(p-substituted phenyl)-1,2-dihydronicotinamides (GPNAH-1,2-H(2)) were synthesized, which were used to mimic NAD(P)H coenzyme and its 1,2-dihydroisomer reductions, respectively. When the 1,4-dihydropyridine (GPNAH-1,4-H(2)) and the 1,2-dihydroisomer (GPNAH-1,2-H(2)) were treated with p-trifluoromethylbenzylidenemalononitrile (S) as a hydride acceptor, both reactions gave the same products: pyridinium derivative (GPNA(+)) and carbanion SH(-) by a hydride one-step transfer. Thermodynamic analysis on the two reactions shows that the hydride transfer from the 1,2-dihydropyridine is much more favorable than the hydride transfer from the corresponding 1,4-dihydroisomer, but the kinetic examination displays that the former reaction is remarkably slower than the latter reaction, which is mainly due to much more negative activation entropy for the former reaction. When the formed pyridinium derivative (GPNA(+)) was treated with SH(-), the major reduced product was the corresponding 1,4-dihydropyridine along with a trace of the 1,2-dihydroisomer. Thermodynamic and kinetic analyses on the hydride transfer from SH(-) to GPNA(+) all suggest that the 4-position on the pyridinium ring in GPNA(+) is much easier to accept the hydride than the 2-position, which indicates that when the 1,4-dihydropyridine is used the hydride donor to react with S, the formed pyridinium derivative GPNA(+) may return to the 1,4-dihydropyridine by a hydride transfer cycle; but when the 1,2-dihydropyridine is used as the hydride donor, the formed pyridinium derivative can not return to the 1,2-dihydropyridine by the hydride reverse transfer from SH(-) to GPNA(+). These results clearly show that the hydride-transfer cycle is favorable for the 1,4-dihydronicotinamides, but unfavorable for the corresponding 1,2-dihydroisomers.     

3-氟-6-碘吡嗪-2-羧酸甲酯的合成及晶体结构

以3-氨基吡嗪-2-羧酸为原料，经酯化反应、亲电反应和重氮化反应合成了3-氟-6-碘吡嗪-2-羧酸甲酯（1），总收率62.34%，其结构经¹H NMR、¹³C NMR和MS确证，用X-单晶衍射法测定了化合物的晶体结构。结果表明：1（CCDC: 1986368）属单斜晶系，空间群C2/c，晶胞参数a=17.6566(5) Å, b=4.74850(10) Å，c=19.6368(6) Å，β=95.6540(10)°，V=1638.39(8) ų，Z=8，R_gt(F)=0.0173，wR_ref(F²)=0.0465，F(000)=1056，μ=3.885 mm^-1。      

PbO2阳极在硫酸溶液中的析氧失活行为

采用热分解鄄电镀法制备了以Sb 掺杂SnO₂(Sb-SnO₂)为底层的Ti 基PbO₂阳极(Ti/PbO₂). 采用加速电解寿命测试、电化学阻抗谱、XRD、SEM-EDX 等技术, 研究了Ti/PbO₂阳极在硫酸溶液中的电解失效行为和机制.结果表明,在新制备的PbO₂镀层中, 由于氧空位的存在, PbO₂镀层的内应力表现为拉应力, 随着电解的进行, 阳极表面生成的活性氧原子在向基底扩散的过程中, 将Pb³⁺态氧化为Pb⁴⁺态, 逐渐占据镀层内作为自由电子施主的氧空位, 这不仅导致镀层的导电性能下降, 同时使镀层的应力逐渐由拉应力转变为压应力, 镀层性质逐渐劣化. 这一过程基本结束时,活性氧原子才大量扩散至Ti基底导致基底的钝化, 在Ti 基底和镀层界面出现显著的界面应力, 在界面应力和镀层内压应力的共同作用下, 阳极出现鼓泡、脱落, 迅速进入失活阶段.     

Stereoelectronic control in the base catalyzed hydrolysis of five-membered ring cyclic phosphonamidates

The base catalyzed hydrolysis of 2-phenyl-2-oxo-3-(2,6-dimethylphenyl)-1,3,2-oxazaphospholidine, $\text{6}$, and 2-phenyl-2-oxo-3-(2,6-diisopropylphenyl)-1,3,2-oxazaphospholidine, $\text{7}$, yields ring opened products involving 95% and 100% P-O cleavage, respectively.     

Fabrication and performance of a three-dimensionally adjustable device for the amperometric detection of microchip capillary electrophoresis

A microchip CE-amperometric detection (AD) system has been fabricated by integrating a two-dimensionally adjustable CE microchip and an AD cell containing a one-dimensionally adjustable disk detection electrode in a Plexiglas holder. It facilitates the precise 3-D alignment between the channel outlet and the detection electrode without a complicated 3-D manipulator. The performance of this unique system was demonstrated by separating five aromatic amines (1,4-phenyldiamine, aniline, 2-methylaniline, 4-chloroaniline, and 1-naphthylamine) of environmental concern. Factors influencing their separation and detection processes were examined and optimized. The five analytes have been well separated within 140 s in a 74 cm long separation channel at a separation voltage of +2500 V using a 10 mM phosphate buffer (pH 3.5). Highly linear response is obtained for the five analytes over the range 20-200 microM with the detection limits ranging from 0.46 to 1.44 microM, respectively. The present system demonstrated long-term stability and reproducibility with RSDs of less than 5% for the peak current (n = 9). The new approach for the microchannel-electrode alignment should find a wide range of applications in CE, flowing injection analysis, and other microfluidic analysis systems.     

Comparative study of electrochemically directed assembly versus conventional self-assembly of thioacetyl-terminated oligo(phenylene ethynylene)s on gold and platinum surfaces

The assembly of thioacetyl-terminated oligo(phenylene ethynylene)s (OPEs) on Au and Pt surfaces under an electric potential (electrochemical assembly, EA) was compared to assembly at an open circuit (conventional self-assembly, CSA). Cyclic voltammetry and ellipsometry were used to characterize the adsorption kinetics of self-assembled monolayers formed by these two techniques. The adsorption rate of the EA was remarkably faster at positive potentials but slower at negative potentials than that of the CSA, The EA at 400 mV proceeded about 800 times faster than the CSA when exposed to the same solution concentrations. The adsorption rates of both EA and CSA were found to be dependent on the molecular structures of OPEs. OPEs containing electron-donating groups assemble faster than those with electron-withdrawing groups. The amount of time that the thioacetyl-terminated OPE is in the presence of the base, for removal of the acetyl group to generate the thiolate, is called the deprotection time. Deprotection times play a critical role in achieving the maximum difference in adsorption rates between the EA and the CSA. The assembly must be initiated no later than 5 min after the basic deprotection is commenced so that the thiolate concentration remains low. The difference in the adsorption rates between EA and CSA might enable selective deposition of certain OPEs onto specific electrodes.     

Efficient alkene hydrosilation with bis(8-quinolyl)phosphine (NPN) nickel catalysts. The dominant role of silyl-over hydrido-nickel catalytic intermediates

A cationic nickel complex of the bis(8-quinolyl)(3,5-di-tert-butylphenoxy)phosphine (NPN) ligand, [(NPN)NiCl]⁺, is a precursor to efficient catalysts for the hydrosilation of alkenes with a variety of hydrosilanes under mild conditions and low catalyst loadings. DFT studies reveal the presence of two coupled catalytic cycles based on [(NPN)NiH]⁺ and [(NPN)NiSiR₃]⁺ active species, with the latter being more efficient for producing the product. The preferred silyl-based catalysis is not due to a more facile insertion of alkene into the Ni–Si (vs. Ni–H) bond, but by consistent and efficient conversions of the hydride to the silyl complex.

A cationic nickel complex of the bis(8-quinolyl)(3,5-di-tert-butylphenoxy)phosphine (NPN) ligand, [(NPN)NiCl]⁺, is a precursor to efficient catalysts for the hydrosilation of alkenes with hydrosilanes under mild conditions and low catalyst loadings.