Hydrogen adsorption on zigzag (8,0) boron nitride nanotubes

The chemical adsorption of H atoms on an (8,0) zigzag boron nitride nanotube is studied using the density functional theory with the supercell method. One to four H atoms per 32 B and 32 N are considered. The results show that H atoms prefer to adsorb on the top sites of adjacent B and N atoms to form an armchair chain along the tube axis. An even-odd oscillation behavior of the adsorption energy of H atoms on the tube is found, and the average adsorption energy of even H atoms is obviously bigger than that of odd H atoms. The results can be understood with the frontier orbital theory. Based on this adsorption behavior, several high-symmetric structures of H adsorbed boron nitride nanotubes with 50% and 100% coverages are studied. The pairs of lines' pattern with 50% coverage has the biggest average adsorption energy per H(2) among the chosen configurations, corresponding to approximately 4 wt % hydrogen storage.     

Evaluating formation and growth mechanisms of silica particles using fluorescence anisotropy decay analysis

At present, there is no direct experimental evidence that primary silica particles, which exist only transiently for a few seconds during the St?ber silica synthesis, can be stable in aqueous solutions. In the present work, we show that primary silica particles are formed spontaneously after the dissolution of diglycerylsilane (DGS) in aqueous solutions and remain stable for prolonged periods of time. By using time-resolved fluorescence anisotropy (TRFA), we demonstrate that this unique property of DGS is ascribed to the slow kinetics of silica particle growth in diluted sols at pH approximately 9.0. The anisotropy decay of the cationic dye rhodamine 6G (R6G), which strongly adsorbs to silica oligomers and nanoparticles in DGS sols, could be fit to three components: a fast (picosecond) scale component associated with free R6G, a slower (nanosecond) rotational component associated with R6G bound to primary silica particles, and a residual (nondecaying) anisotropy component associated with R6G that was bound to secondary or larger particles that were unable to rotate on the time scale of the R6G emission lifetime (4 ns). The data show that, under conditions where fast hydrolysis is obtained, the initial size of the nuclei depends on the silica concentration, with larger nuclei being present in more concentrated sols, while the rate of growth of primary particles depends on both silica concentration and solution pH. At low silica concentrations and high pHs, it was possible to observe the growth of stable, nonaggregating primary silica particles by a mechanism involving rapid nucleation followed by monomer addition. The presence of stable primary particles was confirmed by atomic force microscopy (AFM) imaging. At higher silica concentrations and lower pHs, there was an increase in the initial size of the nuclei formed, which subsequently grew to a larger radius (> 4.5 nm) or aggregated with time, and in such cases, nucleation and aggregation occurred simultaneously in the early stage of silica formation. The data clearly show the power of time-resolved fluorescence anisotropy decay measurements for probing the growth of silica colloids and show that this method is useful for elucidating the mechanism of particle formation and growth in situ.     

Rapid Synthesis of Nanocrystalline TiO2/SnO2 Binary Oxides and Their Photoinduced Decomposition of Methyl Orange

A rapid and simple method, the so-called stearic acid method (SAM) was developed to prepare nanostructured TiO₂/SnO₂ binary oxides by combustion of stearic acid precursors. The preparative process was studied by Fourier transform infrared spectroscopy (FT-IR). During the preparative process, metal precursors were dispersed in stearic acid at molecular level. Microstructure of the samples was investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), BET specific surface area measurement and the results were compared with those obtained by conventional sol-gel method. The photocatalytic decomposition of methyl orange was used as a model system to determine the relative influences of the preparation method and the concentration of SnO₂ on the photocatalytic activities. It was found that preparative methods affected the crystalline structure of TiO₂/SnO₂ powders and the anatase phase of TiO₂ was stabilized by the addition of SnO₂ in SAM. The samples prepared by SAM showed better dispersity, larger specific surface area and the TiO₂/SnO₂ (r=0.15, SAM) catalyst showed higher photocatalytic activity than Degussa P25.     

基于壳聚糖膜固定双酶的胆碱传感器的研究

提出了一种基于壳聚糖膜固定辣根过氧化物酶 胆碱氧化酶的胆碱传感器的制备方法。该传感器以电聚合于玻碳电极的硫堇作为电子传递介体,在pH6. 8,外加电压-0. 2V(vs.SCE)条件下,其峰电流与浓度范围 5. 0×10-5 ~3. 0×10-3 mol/L的胆碱呈良好的线性响应;检出限为 1. 0×10-5 mol/L。传感器有良好的选择性和稳定性,使用一月后,仍能保持其初始活性的 80%。     

Aerobic oxidative cyclization under Pd(II) catalysis: a regioselective approach to heterocycles

[chemical reaction: see text]. An efficient Yb(OTf)3-promoted palladium-catalyzed oxidative cyclization of gamma-heteroalkenyl beta-keto amides has been developed. Under simple aerobic condition, a variety of six-, seven-, and eight-membered-ring N- and O-heterocycles were obtained regioselectively in excellent yield.     

Luminescence 3D-ordered porous materials composed of CdSe and CdTe nanocrystals

The luminescence porous materials of CdTe or CdSe nanocrystals (NCs) were prepared by filling the corresponding NCs into the voids of colloidal crystal by co-deposition of polymer beads and NCs. After removing the beads with tetrahydrofuran (THF), the 3D-ordered porous materials of CdTe (or CdSe) NCs were obtained. The wavelength of maximum photoluminescence of the NCs porous material shows obvious red shift compared with their aqueous dispersion. Under the excitation of high-energy electron the porous materials of CdTe and CdSe NCs will emit photons that can be collected to form a cathode luminescence (CL) image.     

用峰鉴别技术反相高效液相色谱法测定火锅汤料中微量吗啡

本文报道了以峰鉴别技术为定性依据的测定火锅汤料中微量吗啡的反相高效液相色谱法。本法采用改良的Ｓｔａｓ－ｏｔｔｏ法分离提取复杂样品中的微量吗啡。由于采用峰鉴别技术，增加了定性参数，大大提高了定性方法的准确性。本法简便、快速。最低检出浓度为０．０４ｍｇ／Ｌ。在数十例样品分析中，与其它仪器分析结果比照，非常符合。     

停止-流动分光光度法研究铕(II)与二甲酚橙快速电子转移反应动力学

用停止-流动分光光度法研究了Eu~(2+)与二甲酚橙(XO)间快速电子转移反应的动力学规律。求得了速控步骤的动力学参数。如反应级数(n=2)、几个不同温度下的速率常数(k_(278 K)=5.7×10~8 L·mol~-·s~(-1), k_(s38 K)=1.01×10~9 L·mol~(-1)·s~(-1))、活化能(E=7.6×10~3 J·mol~(-1)), 以及指前因子(A=1.5×10~(10) L·mol~(-1)·s~(-1)), 并判断出其为溶液中扩散控制型反应。根据实验现象与测试结果, 提出了Eu~(2+)与XO的反应分别在Eu~(2+)相对过量和在XO过量时的反应机理, 并判断了各反应步骤速率常数之间的相对关系。     

Band structure studies on crystalline C60, Ca3C60, and Ca5C60

The three-dimensional EHMO crystal orbital calculations for crystalline C₆₀, Ca₃C₆₀, and Ca₅C₆₀ are reported. The ground states of both undoped solid C₆₀ and partially doped Ca₃C₆₀ are found to be insulating with an indirect energy gap of 1.2 and 0.5 eV, respectively. In contrast, Ca₅C₆₀ forms a metallic conducting phase with a set of three half-filled bands crossing the Fermi level, which is found to be located close to a peak of the density of state. The character of crystal orbitals near the Fermi level for both Ca₃C₆₀ and Ca₅C₆₀ is completely carbonlike. In both cases, the Ca atoms are almost fully ionized and C₆₀ molecules form a stable negative charge state with six to 10 additional electrons. © 1995 John Wiley & Sons, Inc.     

Comparative study on conventional and low-flow nebulizers for arsenic speciation by means of microbore liquid chromatography with inductively coupled plasma mass spectrometry

The performance of conventional and low-flow nebulizer systems with liquid chromatography in differentiating four arsenic species in urine was evaluated. Two low-flow (DIN and MCN) chamber assemblies and a conventional (CFN) nebulizer-spray chamber assembly were compared in the hyphenation of anion-exchange microbore liquid chromatography with inductively coupled plasma mass spectrometry. Under optimal analytical conditions, the detection limits of the four arsenic species were 0.2-0.6 ng ml(-1) for all the nebulizer systems tested. The chromatographic resolution was best in the case of DIN due to its minimal off-column dead volume and superior transport efficiency. Four arsenic species were determined in the certified reference materials NIST SRM 2670E and 2670N.