Flat-top interleavers with chromatic dispersion compensator based on phase dispersive free space Mach-Zehnder interferometer

In this paper, novel interleavers using circular cavities (CC) in a Mach-Zehnder interferometer (MZI) has been presented and demonstrated for the first time, in which CCs act as phase dispersive mirrors which exhibit a periodic dependence on the frequency of light. Three implementation schemes have been proposed and investigated. Theoretical analysis shows the spectral characteristics of each scheme in a 50-GHz channel spacing application. Furthermore, the chromatic dispersion (CD) of each output comb can be flattened within passband by appending an additional CC. The result shows that the proposed designs with novel interferometer technique can simultaneously provide flat top passbands, high isolation stopband and low CD value as well.     

高立体选择合成N,N′-取代-双-(反式-β,γ-二取代-γ-丁内酰胺)的简便方法(英文)

顺式 -1 -甲氧羰基 -2 -芳基 -6 ,6 -二甲基 -5 ,7-二氧螺环 [2 ,5 ]-4 ,8-辛二酮与联苯二胺 ( 0 )或 4 ,4′-亚甲基二苯胺 ( 1 )在二氯甲烷中 ,4 0℃搅拌反应合成得到化合物 0和 1 ,干燥后进一步在二甲苯中回流即可得到N,N′-取代 -双 -(反式 -β,γ-二取代 -γ-丁内酰胺 ) ( 0或 1 ) ,得率高 ,立体选择性好 ,方法简便     

Ca3La(BO3)3：Tb3+的合成与发光性质

高温固相反应法合成了Ca₃La(BO₃)₃:Tb³⁺光致发光材料。利用扫描电镜和激光衍射分析仪测定了样品的晶粒形貌及粒径大小分布,利用荧光分光光度计研究了Ca₃La(BO₃)₃:Tb³⁺的光致发光特性。确定了在Ca₃La(BO₃)₃基质中Tb³⁺离子浓度对其发光强度的影响及其自身浓度猝灭机理;探讨了助熔剂Li₂CO₃、敏化剂Ce³⁺离子的加入对荧光粉发光强度的影响。     

现场拉曼光谱研究乙腈在金电极上的解离吸附行为

利用共焦显微拉曼系统、结合合适的电极表面粗糙方法研究了非水体系 0 1mol/LLiClO4 /CH3CN溶液中 ,乙腈分子在金表面的吸附和解离行为。结果表明非水体系中乙腈可在金表面发生还原反应 ,产物CN- 离子与电极表面作用形成的表面配合物可在较宽的电位区间吸附于电极表面。溶液中的微量水、激光照射以及电极电位均对该反应有较大的影响。通过拉曼谱图的比较得出乙腈分子解离出的CN- 在金电极表面比在银电极表面有更强的吸附作用。     

Absorption Complex between Porphyrin and Phenothiazine in Reverse Micelles

Porphyrin derivatives attract much more interest in photodynamic therapy (PDT). Their importance as therapeutic drugs and targeting agents has been widely recognized1, and many of the efforts have been put towards crafting new porphyrin-based molecular entities to achieve enhanced tumor localization, better tissue penetration and increased singlet oxygen quantum yield2. The states of porphyrins in tissue models such as micelles, lipid bilayers are extensively investigated focusing more or l…     

LaB6在低压强氮气和氦气中的放电特性

 研究了LaB₆在1~10 Pa氮气和氦气中的直流和脉冲放电特性以及放电过程对电极的影响。结果表明，电极直径为5 mm的LaB6氦气放电管在脉冲工作状态下可以长期稳定放电。在脉冲电压为2.2 kV、脉冲宽度10 ms、频率13.3 Hz下，脉冲峰值放电电流超过120 A。氦气放电管在放电过程中，阴极表面有离子的清洗和活化作用，可以使电极的表面逸出功降低，提高放电管的发射能力和稳定性。LaB₆作为气体放电电极具有寿命长、延迟时间短、放电电流大等优点，可用于重复强流脉冲气体放电的高压高速开关器件。     

无催化纳米氧化锌的制备及其光学性质研究

本文采用无催化剂直接蒸发高纯Zn粉,在800℃氧气氛条件下,在Si(111)衬底上生长得到以四角状为主的纳米ZnO(T-ZnO)。T-ZnO纳米线每个角约互成110°,长度约为1.5μm,直径100nm左右;Raman分析表明E2(H)普遍存在于各形态的ZnO;光致发光光谱表明,T-ZnO纳米线的光致发光除了与材料性质有关,还与杂质缺陷有关,蓝绿光带是ZnO的缺陷产生的。     

A solar radio moving type IV burst of expanding arches type involving multi-sources

A complex solar radio moving type IV burst was observed on 23 September 1998 with the broadband (1.0–2.0 GHz and 2.6–3.8 GHz) spectrometers with high temporal and spectral resolutions at National Astronomical Observatories of China (NAOC). Comparing to the high spatial resolution data of Siberian Solar Radio Telescope (SSRT), we find that this burst is a rare type of moving type IV burst which is caused by the expanding arches, and the spatial structure oscillations of the radio sources are related with the time structure pulsations of the radio emission. Furthermore, the burst is associated with the multiple quasi-periodic long-term pulsations, and this suggests the existence of multi-scale magnetic structures in a large expanding coronal arch. We think the moving type IV burst is due to the synchrotron emission of the energetic electrons trapped in the expanding arch, and the multiple quasi-periodic pulsations are due to the second harmonic plasma emission.     

ONOO-活性氧的荧光光谱分析进展

系统介绍了ONOO^-活性氧的化学性质，并对其参与的主要化学反应进行了分类和总结．同时，比较了近年来用于ONOO^-检测的方法，并重点论述了荧光光谱分析方法尤其是酶催化动力学荧光分析法在检测ONOO^-活性氧方面的优势和最新的研究进展．     

Effects of Processing Parameters on Microstructure and Properties of Nanoscale ZrC/ZrB2 Multilayered Coatings

ZrC/ZrB2 multilayered coatings with bilayer periods of 3.5-40nm are synthesized by rf magnetron sputtering. Analyses of x-ray diffraction, scanning electron microscopy and nanoindentation indicate that multilayered coatings possess much higher hardness and greater fracture resistance than monolithic ZrC and ZrB2 coatings. A maximum hardness （41.TCPa） and a critical fracture load （73.7mN） are observed in the multilayer with A = 32 nm deposited at the substrate bias -40 V. Higher residual stress built in the ZrC layer can be released by periodic insertion of ZrB2 into the ZrC layer. A clear multilayered structure with mixed ZrB2（001）, ZrB2 （002） and ZrC （111） orientations should be responsible for the enhanced mechanical properties.