Bio-Plasmonics: Nano/micro Structure of Surface Plasmon Resonance Devices for Biomedicine

We have reported a novel design of surface plasmon resonance (SPR) device, which uses alternating dielectric layers to enhance the SPR signal quality and modulate its resonant position. Admittance loci method of thin film design has been used in the design of such a device. The use of biomolecular thin film, such as DNAs or Porteins, in this design can result in resonant condition of wavelength changes as well. Bio-plasmonics is proposed for the research and development of novel devices, which use biomolecules as a part of the plasmon oscillation system to actively interact with nano/micro structure.     

Crystal structure and magnetic properties of two new cobalt selenite halides: Co5(SeO3)4X2 (X=Cl, Br)

Two new isostructural cobalt selenite halides Co₅(SeO₃)₄Cl₂ and Co₅(SeO₃)₄Br₂ have been synthesized. They crystallize in the triclinic system space group P−1 with the following lattice parameters for Co₅(SeO₃)₄Cl₂: a=6.4935(8) Å, b=7.7288(8) Å, c=7.7443(10) Å, α=66.051(11)°, β=73.610(11)°, γ=81.268(9)°, and Z=1. The crystal structures were solved from single-crystal X-ray data, R1=3.73 and 4.03 for Co₅(SeO₃)₄Cl₂ and Co₅(SeO₃)₄Br₂, respectively. The new compounds are isostructural to Ni₅(SeO₃)₄Br₂.Magnetic susceptibility measurements on oriented single-crystalline samples show anisotropic response in a broad temperature range. The anisotropic susceptibility is quantitatively interpreted within the zero-field splitting schemes for Co²⁺ and Ni²⁺ ions. Sharp low-temperature susceptibility features, at T_N=18 and 20 K for Co₅(SeO₃)₄Cl₂ and Co₅(SeO₃)₄Br₂, respectively, are ascribed to antiferromagnetic ordering in a minority magnetic subsystem. In isostructural Ni₅(SeO₃)₄Br₂ magnetically ordered subsystem represents a majority fraction (T_N=46 K). Nevertheless, anisotropic susceptibility of Ni₅(SeO₃)₄Br₂ is dominated at low temperatures by a minority fraction, subject to single-ion anisotropy effects and increasing population of S_z=0 (singlet) ground state of octahedrally coordinated Ni²⁺.     

长江堤防工程地质信息处理模型及技术方法

长江中下游的主要防洪工程是长江干堤 ,长江堤防线路长、工程浩大、堤基工程地质水文地质条件复杂 ,涉及大量的已有地质数据和资料。今后在整治加固堤防的工程地质勘察工作中 ,还需随时进行数据的收集、存储、检索、分析、统计和维护 ,随时调用这些数据进行综合处理、编制报告和图件 ;在防汛期间可以针对堤防险工险段的险情 ,随时查询和调用有关的资料、数据或者图件 ,提供采取抢险措施决策的地质依据。这既提高了地质数据的利用价值和利用率 ,又保证了信息的准确性、完整性和共享性。因此 ,建立合理的长江堤防工程地质信息处理模型及其成熟的技术方法具有重要的意义。     

可允许集上的广义向量拟均衡问题

主要讨论可允许集上的广义向量拟均衡问题,推广L in的一些结果.     

标准体系的比例型寿命使用期模型与分析

本文在基于标准被废除按比例进行时的标准体系使用期的两个新模型。首先给出了模型假设条件,然后定义了标准使用期。根据假设给出了两个模型条件下的标准使用期公式,最后通过数值示例说明了标准使用期的公式使用。     

Simulation and fabrication of carbon nanotubes field emission pressure sensors

A novel field emission pressure sensor has been achieved utilizing carbon nanotubes (CNTs) as the electron source. The sensor consists of the anode sensing film fabricated by wet etching process and multi-wall carbon nanotubes (MWNTs) cathode in the micro-vacuum chamber. MWNTs on the silicon substrate were grown by thermal CVD. The prototype pressure sensor has a measured sensitivity of about 0.17-0.77 nA/Pa (101-550 KPa). The work shows the potential use of CNTs-based field-emitter in microsensors, such as accelerometers and tactile sensors.     

梯度棒折射率分布系数的计算和验证

本文推导了用离子交换法制作的径向折射率梯度棒的g,h_4和h_6与材料特性相联系的计算公式。根据测定的材料参数,并用本文公式算出的g值与用成像法测得的g值相比较,其结果基本相符。     

模式评价理论模型及其应用

基于事前评价过程和自然界生物进化过程的相似性，提出了系统结构、系统结构模式和系统环境模式矩阵的概念，并根据系统结构、系统结构模式与系统环境模式矩阵的适应程度，建立了模式评价决策模型，制定了评价系统的评价分类准则，并对评价系统作了一定的理论分析．将此模型和方法应用于城市生态安全评价中，通过与模糊综合评价法的比较，表明了该评价模型和方法的优越性．     

非晶硅薄膜的低温快速晶化及其结构分析

在镀铝的廉价玻璃衬底上高速沉积的非晶硅薄膜在不同的温度下退火10min.退火温度为500℃时,薄膜表面形成了硅铝的混合相,非晶硅薄膜开始呈现了晶化现象 退火温度为550℃时,大部分(约80%)的非晶硅晶化为多晶硅,平均晶粒尺寸为500nm 退火温度为600℃时,几乎所有的非晶硅都转化为多晶硅,其平均晶粒尺寸约为15μm.