Explicit analytical solutions of the anisotropic Brinkman model for the natural convection in porous media (Ⅱ)

Some algebraically explicit analytical solutions are derived for the anisotropic Brinkman model―an improved Darcy model―describing the natural convection in porous media. Besides their important theoretical meaning (for example, in analyzing the non-Darcy and anisotropic effects on the convection), such analytical solutions can be the benchmark solutions that can promote the development of computational heat and mass transfer. Some solutions considering the anisotropic effect of permeability have been given previously by the authors, and this paper gives solutions including the anisotropic effect of thermal conductivity and the effect of heat sources.     

Isoscaling in Statistical Sequential Decay Model

A sequential decay model is used to study isoscaling, i.e. the factorization of the isotope ratios from sources of different isospins and sizes over a broad range of excitation energies, into fugacity terms of proton and neutron number, R21（N, Z） = Y2（ N, Z）/Y1（ N, Z） = Cexp（αN -βZ）. It is found that the isoscaling parameters α and β have a strong dependence on the isospin difference of equilibrated source and excitation energy, no significant influence of the source size on α andβ has been observed. It is found that α and β decrease with the excitation energy and are linear functions of 1/T and △（Z/A）2 or△（N/A）2 of the sources. Symmetry energy coefticient Gsym is constrained from the relationship of a and source △（Z/A）2, /3 and source △（N/A）2.     

A Bidirectional, Diode-Pumped, Passively Mode-Locked Nd：YVO4 Ring Laser with a Low-Temperature-Grown Semiconductor Saturable Absorber Mirror

We report the operation of a bidirectional picosecond pulsed ring Nd：YVO4 laser based on a low-temperaturegrown semiconductor saturable absorber mirror. Except for the laser crystal, the six-mirror ring laser cavity has no intra-cavity elements such as focusing lens or mirror. The bidirectional mode locked pluses are obtained at the repetition rate of 117.5 MHz, pulse duration of 81 ps, power of 2 × 200 mW.     

利用宇宙线对BESⅢ量能器CsⅠ（Tl）晶体探测器单元的测量

利用宇宙射线进行探测器模型的性能测试是高能物理普遍采用的方法，其中最重要的步骤之一就是确定宇宙线入射的准确位置和径迹．多数采用丝室探测器来进行宇宙线的精确定位，需要很高的造价和复杂的电子学系统．本文介绍一种简单的定位方法，采用塑料闪烁体条加波移剂光纤编码读出的方式，可以实现精度为1cm的定位．据此建立了一套实验装置，对BESⅢ电磁量能器CsⅠ（Tl）晶体探测器单元的光输出强度和不均匀性进行了测量．     

相位匹配下锥形光纤激发出的回廊模谐振

分别计算不同直径下锥形光纤基模和玻璃微球谐振腔内最低阶径向回廊模的传播常量,利用相位匹配条件,作出了锥形光纤与石英玻璃微球腔的直径对应关系曲线.在此基础上,选择锥腰直径2.8 μm左右的低损耗锥形光纤与直径143.1 μm球形度很好的玻璃微球腔进行近场耦合以激发球内的最低阶径向回廊模谐振,在锥形光纤的两端进行通光测试,在输出端获得了等间距分布的窄线宽滤波谱线,其吸收峰位置与利用Mie理论计算的球内最低阶径向回廊模谐振峰位置相一致.     

SiO2分子的基态(X1A1)结构与分析势能函数

应用群论及原子分子反应静力学方法推导了SiO2分子的电子态及其离解极限,采用B3P86方法,在6-311G**水平上,优化出SiO2基态分子稳定构型为单重态的C2V构型,其平衡核间距Re=RSi-O=0.1587 nm,∠OSiO=111.2°,能量为-440.4392 a.u..同时计算出基态的简正振动频率:对称伸缩振动频率v(B2)=945.4cm-1,弯曲振动频率v(A1)=273.5 cm-1和反对称伸缩振动频率v(A1)=1362.9cm-1.在此基础上,使用多体项展式理论方法,导出了基态SiO2分子的全空间解析势能函数,该势能函数准确再现了SiO2(C2V)平衡结构.     

Rapid Fabrication of Three-Dimensional Woodpile Photonic Crystals by Means of Two-Photon Photopolymerization

Two-photon photopolymerization （TPP） of femtosecond laser is a promising method to fabricate three-dimensional woodpile photonic crystals （PCs）. We build micro-fabricatlon system based on the principle of TPP. Three- dimensional woodpile PCs consisting of in-plane rod distances ranging from 1000nm to 2000nm are fabricated by focusing femtosecond laser in photosensitive liquid resin ORMOCER. The properties of the PCs are also discussed, and fundamental photonic band gaps in middle-infrared range are measured, whose in-plane rod distances are 1500nm and 2000 nm. Three-dimenslonal woodpile PC devices with desired defects, such as cross-waveguide and micro-laser structures, are introduced easily by TPP. We fabricate the three-dimensional woodpile PCs in the liquid resin at the fast scanning speed of 120μm/s.     

飞秒激光-薄膜靶相互作用中超热电子产额和激光转化效率

 在激光能量130 mJ（靶面），脉宽60 fs，波长800 nm，对比度1∶10^-6，激光与靶法线成45°夹角，P偏振，靶面激光峰值功率密度约为7.0×10¹⁷ W·cm^-2，无预脉冲的条件下，采用电子谱仪与经γ标准源标定的LiF热释光探测器（TLD）相配合，测量了飞秒激光-薄膜靶相互作用中产生的超热电子能谱。根据所测的能谱，推算出超热电子的产额和激光能量转化为超热电子能量的效率，在靶法线方向分别为1.19×10¹⁰/sr和4.55%/sr，在激光反射方向分别为1.83×10⁹/sr和0.76%/sr。结果显示，不同方向的超热电子产额和激光转化效率有所不同，原因在于激光-等离子体相互作用产生的超热电子构成各向异性的分布。     

部分相干光被环形透镜聚焦而产生的焦移

 从理论上研究部分相干光被一环形透镜聚焦,在焦点附近的轴上点的光强分布。研究结果表明,当部分相干光被一环形透镜聚焦时,最大聚焦光强不在几何焦点,而是位于透镜与几何焦点之间,出现焦移现象。并且,焦移量不仅依赖于透镜外半径的菲涅耳数,还依赖于部分相干光的空间相干度和中心拦截比。透镜的菲涅耳数越小,焦移越大;部分相干光的空间相干度越低,焦移越大。当菲涅耳数一定时,环形透镜的中心拦截比越大,焦移越大;当空间相干度很小时,情况就变得比较复杂。     

用边界元法分析非均匀介质中的传输线

 从静电场边值问题的积分解出发,推导出用边界元法求解分区均匀介质填充传输线问题的矩阵表达式,给出传输线电容参数的计算公式,介绍用边界元法求解分区均匀介质填充传输线问题的基本原理和求解过程。对两类传输线的计算结果表明：用边界元法求解分区均匀介质填充传输线问题,不仅具有较高的计算精度,而且可以很方便地应用于各类复杂截面分区均匀介质填充传输线问题的工程设计与计算,边界元法是求解分区均匀介质填充传输线问题的一种有效方法。