Multi-Objective Optimization of Braun-Type Exothermic Reactor for Ammonia Synthesis

The exothermic reactor for ammonia synthesis is a primary device determining the performance of the energy storage system. The Braun-type ammonia synthesis reactor is used as the exothermic reactor to improve the heat release rate. Due to the entirely different usage scenarios and design objectives, its parameters need to be redesigned and optimized. Based on finite-time thermodynamics, a one-dimensional model is established to analyze the effects of inlet gas molar flow rate, hydrogen–nitrogen ratio, reactor length and inlet temperature on the total entropy generation rate and the total exothermic rate of the reactor. It’s found that the total exothermic rate mainly depends on the inlet molar flow rate. Furthermore, considering the minimum total entropy generation rate and maximum total exothermic rate, the NSGA-II algorithm is applied to optimize seven reactor parameters including the inlet molar flow rate, lengths and temperatures of the three reactors. Lastly, the optimized reactor is obtained from the Pareto front using three fuzzy decision methods and deviation index. Compared with the reference reactor, the total exothermic rate of the optimized reactor is improved by 12.6% while the total entropy generation rate is reduced by 3.4%. The results in this paper can provide some guidance for the optimal design and application of exothermic reactors in practical engineering.     

A STUDY OF LOW CYCLE FATIGUE PROPERTIES OF MATERIALS BASED ON THE FUNNEL-SHEET SPECIMENS1)

根据能量等效方法,针对漏斗薄片试样,提出了关联Ramberg-Osgood 幂律参数、试样几何参数的载荷-位移半解析统一模型。采用有限元数值模拟,正、反向验证了该模型的有效性。在此基础上,提出了通过漏斗薄片试样低循环试验实现材料低周疲劳性能的预测方法。基于薄片试样低循环试验数据,完成了SS316L, N18及SAPH440 三种材料的低周疲劳性能预测,预测结果与标准试样试验结果具有良好的一致性。并利用该方法完成了N18与SAPH在不同温度条件下的低周疲劳性能预测。     

Dissipation Behavior and Acute Dietary Risk Assessment of Thiamethoxam and Its Metabolite Clothianidin on Spinach

Thiamethoxam and its metabolite clothianidin residues pose a potential threat to human health. This study aims to investigate the residue behavior and acute dietary risk assessment of thiamethoxam and clothianidin on spinach. Thiamethoxam and clothianidin were extracted using a quick, easy, cheap, effective, rugged, safe (QuEChERS) method and analyzed using liquid chromatography-tandem mass spectrometry (LC-MS/MS). At spike levels from 0.01 to 5 mg kg⁻¹, the average recoveries of both analytes were in the range of 94.5–105.5%, with relative standard deviations (RSDs) of 3.8–10.9%. The dissipation behavior of thiamethoxam followed first-order kinetics, with half-lives of ≤1.6 days. Clothianidin appeared readily as a plant metabolite with highest level exhibited during 3 to 5 days after application. Temperature and light may be two main factors for degradation of thiamethoxam. Besides, acute risk assessment of thiamethoxam and clothianidin was evaluated with risk quotients (RQs) <100%, which suggested a low health risk for all consumer groups of Chinese residents.     

Structure and Processing Properties of Nine Yam (Dioscorea opposita Thunb) Starches from South China: A Comparison Study

In order to explore the processing and application potential of Chinese yam starch, nine kinds of Chinese yam starch (GY11, GY5, GY2, GXPY, LCY, SFY, MPY, SYPY, ASY) from South China were collected and characterized. The chemical composition, rheological properties, thermal properties, and in vitro starch digestion were compared, and the correlation between the structure and processing properties of these yam starches was analyzed using Pearson correlation. The results show that GY2 had the highest amylose content of 28.70%. All the yam starches were similarly elliptical, and all the yam starch gels showed pseudoplastic behavior. Yam starches showed similar pasting temperatures and resistant starch content, but SYPY showed the largest particle size (28.4 μm), SFY showed the highest setback (2712.33 cp), and LCY showed the highest peak viscosity (6145.67 cp) and breakdown (2672.33 cp). In addition, these yam starches also showed different crystal types (A-type, B-type, C-type), relative crystallinity (26.54–31.48%), the ratios of 1045/1022 cm⁻¹ (0.836–1.213), pasting properties, and rheological properties, so the yam starches have different application potentials. The rheological and pasting properties were related to the structural properties of starch, such as DI, Mw, and particle size, and were also closely related to the thermodynamic properties. The appropriate processing methods and purposes of the processed products of these yam starches can be selected according to their characteristics.     

Selective photocatalytic aerobic oxidation of methane into carbon monoxide over Ag/AgCl@SiO2

Design of active catalysts for chemical utilization of methane under mild conditions is of great importance, but remains a challenging task. Here, we prepared a Ag/AgCl with SiO₂ coating (Ag/AgCl@SiO₂) photocatalyst for methane oxidation to carbon monoxide. High carbon monoxide production (2.3 μmol h⁻¹) and high selectivity (73%) were achieved. SiO₂ plays a key role in the superior performance by increasing the lifetime of the photogenerated charge carriers. Based on a set of semi in situ infrared spectroscopy, electron paramagnetic resonance, and electronic property characterization studies, it is revealed that CH₄ is effectively and selectively oxidized to CO by the in situ formation of singlet ¹O₂via the key intermediate of COOH*. Further study showed that the Ag/AgCl@SiO₂ catalyst could also drive valuable conversion using real sunlight under ambient conditions. As far we know, this is the first work on the application of SiO₂ modified Ag/AgCl in the methane oxidation reaction.

The Ag/AgCl@SiO₂ catalyst exhibits excellent photocatalytic activity in selective aerobic oxidation of methane to carbon monoxide with high selectivity, and extended real light simulation feasibility shows potential in practical application.     

NATIONAL STANDARD OF HEAT CAPACITY MEASUREMENT OF SOLIDS IN THE RANGE OF 4.2—90K——AN AUTOMATED ADIABATIC CALORIMETER FROM 25 TO 90K AND MOLAR HEAT CAPACITIES OF α-ALUMINA

The construction of an automated adiabatic calorimeter for heat capacity measurement ofsolids in the temperature range of 25- 90K is described in detail. The sample vessel of thecalorimeter has thin radial vanes which make no contact with its inner wall and are distrib-uted evenly, thus greatly improving the internal thermal equilibration of the vessel. Theprecision of temperature control for the adiabatic shields and electrical leads of the calori-metric system are heightened to a great extent by using the high precision ACD- 79 modeladiabatic controller specially developed by us for this purpose. Measurements of the heatcapacities of high purity α-Al_2O_3, one of the internationally-accepted standard referencematerials, agree with those of the National Bureau of Standards (NBS), USA within ±0.3%,demonstrating the reliability of this apparatus.     

高效液相色谱法测定胶粘剂中的游离甲醛

建立了胶粘剂中游离甲醛的高效液相色谱检测方法,对提取方法、衍生化条件及色谱条件进行了研究。结果表明,采用超声波萃取法代替经典的水蒸气蒸馏法能更快速、高效地提取目标物。液相色谱法对甲醛的检出限为0．024μg／mL,在0．1～12μg／mL范围内,线性相关系数R^2=0．9995,在1、2、8μg／mL三个添加水平下,回收率在98．73％～101．68％之间。五个实验室间的相对标准偏差为2．6％。对某白乳胶样品的测定结果表明,本法在定性检测、抗干扰能力及稳定性上都高于常用的乙酰丙酮比色法。     

3-甲基环状乙撑磷酸二酯醇解的反应途径的理论研究

采用密度泛函理论和MP2方法研究了3-甲基环状乙撑磷酸二酯(MEP)与甲醇的反应途径:(Ⅰ)CH3O-+MEP;(Ⅱ)CH3OH+MEP;(Ⅲ)CH3O-+HMEP(MEP的质子化形式);(Ⅳ)CH3OH+HMEP.在B3LYP/6-31++G(d,p)水平上优化了四条反应途径的反应物、中间体、过渡态及产物的几何构型,并在同水平上进行了自然电荷分析,然后在MP2/6-311++G(3df,2p)水平上计算了各驻点的单点能.采用极化连续介质模型(PCM)研究了各途径在苯、甲醇和水溶液中的溶剂化效应.计算结果表明,溶剂效应使途径(Ⅰ)的自由能垒降低,而使途径(Ⅱ)和(Ⅳ)的决速步骤的自由能垒升高.在气相和苯溶剂中途径(Ⅳ)是反应的优势途径,在甲醇和水溶剂中途径(Ⅰ)则成为最优.研究结果进一步表明实验条件下途径(Ⅱ)与(Ⅳ)对总醇解反应的贡献相当.     

邻苯二酚在活化玻碳电极上的电化学行为

邻苯二酚( QH2,儿茶酚)等有机化合物是人体内的电活性物质,直接参与人体内的各种生理过程.