Large area bolometers for millimeter-wave power calibration

An accurate monolithic power meter has been developed for millimeter-wave applications. The detector is a large-area Bismuth bolometer, integrated on a fused-Quartz substrate. It simply measures the temperature change caused by the absorption of millimeter-wave radiation. The power meter is simple to fabricate, inexpensive, and can be easily calibrated using a low-frequency network. The measured responsivity for a 50 bolometer, with an area of 1×1cm, at a bias of 1V. and a video modulation of 100Hz, is 1mV/W. The noise spectrum exhibits a 1/f rolloff till 1KHz, and is limited by the Johnson noise for higher frequencies. The NEP of the detector is 3WHz^–1/2 at a video modulation of 1KHz. It is possible to decrease the current NEP by fabricating bolometers with higher responsivities. Possible application areas are absolute power calibration and localized power density measurements at millimeter and submillimeter wavelengths.     

Doppler-broadening measurements of microvoids at the Au/GaAs interface

Recent positron lifetime studies made on the Au/GaAs interface with an applied electric field returning a significant fraction of bulk implanted positrons to the interface have revealed the presence of microvoids( 1 nm diameter) at the interface. In this work an attempt has been made to study these microvoids by observing the Doppler broadening on the annihilation radiation coming from them. This is done both by observing theS-parameter as a function of applied bias and by applying the generalized least-squares method to the deconvolution of the annihilation radiation lineshape. The general conclusion is that the Doppler-broadened data are consistent with the majority of positrons trapping into microvoids, probably associated with grain boundaries. The data suggest that these open volume defects are more associated with the Au film rather than the Au-Ga alloyed interfacial region.Paper presented at the 132nd WE-Heraeus-Seminar on Positron Studies of Semiconductor Defects, Halle, Germany, 29 August to 2 September 1994     

反转磁场处粒子运动分析

本文用解析方法分析了反转磁场位形中反转力线处粒子运动以及引导中心性质,从哈密顿函数出发,讨论了粒子在准势场中的束缚运动的特征以及x-px相空间上的周期性质;给出了引导中心坐标、绝热不变量、运动频率和漂移速度等物理量的表达式,从而描写了粒子二维运动图象。该工作为不稳定性理论和非线性动力学理论的进一步研究打下基础。     

ELECTROLUMINESCENCE SPECTRA OF GexSi1-x/Si SINGLE QUANTUM WELL

The electroluminescence of Ge_xSi_1-x/Si single quantum well was measured at temper-atures above room temperature along the growth direction and the direction normal to it. TO and NP peaks were resolved.     

电容温度传感器的实验研究

从液氮温度到水的沸点温度范围内,测量了介质分别为钽,涤纶,陶瓷,玻璃釉和陶瓷独石一体化结构的商用固体电容器的电容量-温度之间的关系.拟合测量结果表明,独石陶瓷电容器在正温度段具有较好的线性响应(-10pF/℃),灵敏度(0.1 ℃)和精确度(标准差为0.016);而涤纶电容器在负温度段的特性较好( 17pF/℃,0.06 ℃和0.01).此外,在约0.5特斯拉的恒定磁场作用下,无论在正或负温度段,上述测得的电容量-温度关系几乎不受影响.因此,本研究对开发抗强电磁场,自加热效应小或导热系数小的低温测温器具有较大的参考价值.     

Two matrix algorithms for eigenmodes of a Bessel-Gauss resonator

A Bessel-Gauss resonator (BGR) was proposed to produce the Bessel Gauss beams. In this paper transverse profiles and their corresponding losses of the BGR are computed by use of the entire matrix formalism and the transfer matrix method, and the computation results from two algorithms are compared. The computation results show that for the BGR there is no inconsistence in the mode fields yielded by two methods, and the transfer matrix methods are more accurate in the mode losses than the entire matrix formalism, which lead to a believable conclusion that the BGR with a convex-spherical mirror easily produces the fundamental Bessel-Gauss mode of good quality.     

叶绿素紫外吸收特性的分析研究

鉴于光合作用对人类生存和发展的极其重要的地位,本文选取其关键载体——叶绿素进行其光谱的分析研究。在理论分析的基础上,使用WGD-8A型多功能组合光谱仪测量并分析了叶绿素的紫外吸收特性。结合实验结果和前人的研究成果,得出叶绿素在紫外波段281nm和312nm处有较强的吸收峰,紫外线对于光合作用有促进作用的结论,并提供了一种测量叶绿素含量的方法。     

Effect of Surface Structure of Nano-CaCO3 Particles on Mechanical and Rheological Properties of PVC Composites

To study the effect of different surface structures on resultant mechanical and rheological properties, nano-CaCO₃ particles were treated with isopropyl tri-stearyl titanate (H928), isopropyl tri-(dodecylbenz-enesulfonyl) titanate (JN198), and isopropyl tri-(dioctylpyrophosphato) titanate (JN114). Scanning electron microscopy (SEM) and dynamic mechanic analysis (DMA), carried out to characterize the effective interfacial interaction between the nano-CaCO₃ particles and a poly(vinyl chloride) (PVC) matrix, indicated that JN114 treated nano-CaCO₃ particles had the strongest interfacial interaction with a PVC matrix, while H928 treated nano-CaCO₃ had the weakest. The rheological and mechanical properties of PVC/nano-CaCO₃ composites were investigated as a function of surface structure and filler volume fraction. The tensile yield stress and elongation at break decreased with the increasing of calcium carbonate content while tensile modulus increased. PVC filled with JN114 treated nano-CaCO₃ had the highest tensile modulus and tensile yield stress, while those filled with H928 treated nano-CaCO₃ had the highest elongation at break at the same filler content. The impact strength of PVC/nano-CaCO₃ composites increased with the increasing of CaCO₃ content, and PVC composites filled with JN198 treated nano-CaCO₃ particle had a higher impact strength than those with JN114 or H928 treated, with the value reaching 23.9 ± 0.7 kJ/m² at 11 vol% CaCO₃, four times as high as that of pure PVC. Rheological properties indicated that a suitable interfacial interaction and a good dispersion of inorganic filler in a PVC matrix could reduce the viscosity of PVC/nano-CaCO₃ composites. The interfacial interaction was quantitatively characterized by semiempirical parameters calculated from the tensile strength of PVC/nano-CaCO₃ composites to confirm the results from the SEM and DMA experiments.     

Ab initio multi-reference configuration interaction of the low-lying states of the AsP molecule

Nine low-lying electronic states of the AsP molecule, including Σ , Ⅱ, and △ symmetries with singlet, triplet, and quintet spin multiplicities, are studied using multi-reference configuration interaction method.The potential energy curves and the spectroscopic constants of these nine states are determined, and compared with the experimental observed data as well as other theoretical works available at present.Three quintet states are reported for the first time.Furthermore, the analytical potential energy functions of these states are fitted using Murrell-Sorbie function and least square fitting method.     

光学技术在运动人体科学中的应用

研究了光学技术在人体运动研究中潜在应用．光生物调节作用可以抑制细胞凋亡．色光疗法、低强度激光针灸和鼻腔内低强度激光照射可以调节植物神经功能和昼夜节律，它们具有防治运动性疲劳的潜在价值．蛋白质分子构型变化可以用园二色谱表征，组织和大脑血氧饱和度的变化可以用近红外光谱表征，尿液可以用傅里叶红外光谱进行代谢组学研究，它们都可以作为运动训练的有效表征工具．