A note on the Lyapunov equation for discrete linear systems in Hilbert space

It is given a simple and unified new proof for the following well-known stability condition: an infinite-dimensional time-invariant discrete linear system is uniformly asymptotically stable if and only if the associate Lyapunov equation has a unique strictly positive solution. The proof is partially based on an application of Rota's model construction technique.     

Properties of (InGa)As/GaAs QW (λ ≈ 1.2 µm) facet-coated edge emitting diode laser

In this paper, we report on the design and optical properties of laser diodes with an emission wave-length of ～1170 nm based on an (InGa)As/GaAs double quantum well active layer. The back and front facet of the laser diodes were coated with SiO_x dielectric films that influence the output optical power by enhancing or lowering the facet reflectivity. The measurements show improvement of the facet-coated laser diode properties in the threshold-current-density reduction along with light output power enhancement. Furthermore, a narrow far field pattern and high side mode suppression have been observed.     

Dosimetric investigations of laser-induced phase transition of MX1-cell membranes by use of quantum dots

It is well known that laser scattered-light applicators when applied for laser-induced tumor therapy allow the precise thermal destruction of metastases. Using laser radiation in the NIR spectral range (usually, Nd:YAG laser systems λ = 1064 nm), a penetration depth of 5–10 cm (1/e is the decrease in radiation intensity) is achieved in biological tissues. The major tissue-optical parameters, i.e., absorption coefficient μ_a, scattering coefficient μ_s, and the anisotropy factor g, show biological tissues to be strongly scattering media which have a so-called optical window in the NIR. As a consequence, the therapeutic laser radiation is scattered and absorbed at a deeper level, leading to a virtual enlargement of the laser applicator. The thermal sclerotization and the thermal cell damage originate within the absorbing volume of the laser radiation and spread outward by thermal diffusion. There are three dosimetrically relevant zones of thermal and biological damage: (1) a zone of thermal coagulation; (2) a threshold of partial necrosis (destruction of all metabolic processes in the cell is the maintenance of essential parts of the cytoskeleton and the plasma membrane); this is characterized by a specific temperature range, the so-called phase transition, which refers to the transition from the gel phase of the biomembrane to the fluid phase; the determination of this temperature zone is an integral part of the following experimental investigations on MX1 cells; (3) an external zone of thermal effects made up of partial and multiple damage with a statistical chance of survival. This paper describes the investigations on heat stress in cancer cells to verify the maximum phase transition of the outer MX1 cell membranes and the related results. For this purpose, a novel method of quantum dot fluorescence dosimetry was developed. The evaluation of the measured laser-induced fluorescences yields a first approximation of the determination of the phase transition on MX1 cells.     

Pushing Squares Around

We study dynamic self-reconfiguration of modular metamorphic systems. We guarantee the feasibility of motion planning in a rectangular model consisting of square modules that are allowed to slide along or rotate about one another. That is, we show that any two connected configurations of the same number of modules can be transformed into each other by a sequence of moves so that all intermediate configurations are connected. This settles a conjecture formulated in [6].     

Slow positron beam study of corrosion-related defects in pure iron

Corrosion-related defects of pure iron were investigated by measuring Doppler broadening energy spectra (DBES) of positron annihilation and positron annihilation lifetime (PAL). Defect profiles of the S-parameter from DBES as a function of positron incident energy up to 30 keV (i.e. ∼1 μm depth) were analyzed. The DBES data show that S-parameter increases as a function of positron incident energy (mean depth) after corrosion, and the increase in the S-parameter is larger near the surface than in the bulk due to corrosion. Furthermore, information on defect size from PAL data as a function of positron incident energy up to 10 keV (i.e. ∼0.2 μm depth) was analyzed. In the two-state trapping model, the lifetime τ₂ = 500 ps is ascribed to annihilation of positrons in voids with a size of the order of nanometer. τ₁, which decreases with depth from the surface to the bulk, is ascribed to the annihilation of positrons in dislocations and three-dimensional vacancy clusters. The corroded samples show a significant increase in τ₁ and the intensity I₂, and near the surface the corroded iron introduces both voids and large-size three-dimensional vacancy clusters. The size of vacancy clusters decreases with depth.     

Homogeneous immunoassays

Applied Biochemistry and Biotechnology -     

Detection of silent temporal gaps in sinusoidal markers

Gap detection thresholds were measured by forced-choice procedure for conditions where the duration of a silent gap was varied adaptively between pairs of sinusoidal markers of the same or different frequency. Frequencies of the first sinusoid in a pair of markers ranged from F1 = 500 to 4000 Hz. Second-sinusoid marker frequencies F2 included F1 = F2, and usually frequencies 2%, 5%, 24%, and 50% higher than F1. In preliminary studies the role of presentation level (E/N0) on gap detection was considered. Preliminary data revealed confounding extraneous factors arising from gating transients and from overall stimulus (i.e., markers + gap) and/or masker duration cues. In the main experiments, the contributions of these extraneous cues were evaluated with experimental designs aimed at identifying and minimizing the confounding roles of these cues in gap detection. For conditions where extraneous gating transient cues were minimized (by presenting the sinusoidal markers in a continuous noise masker with random onset phase for the second sinusoid in every pair of markers) and overall stimulus duration cues were diminished (by randomizing the duration of each marker independently), gap detection thresholds increased from 5 to 90 ms as the frequency separation between F1 and F2 was increased by half an octave. When the gap detection thresholds were treated as filter attenuation values by normalizing and converting the data into decibels, the data were closely fit by the roex filter model. On average, the listeners' performances were modeled well by a constant-percentage (7%) bandwidth filter centered on F1.     

Roots,iterations and logarithms of formal automorphisms

In this paper it is proved that having a logarithm is equivalent to having roots of arbitrary order in the group of automorphisms of a formal power series ring, and in algebraic subgroups too     

Viscometric properties of dilute polystyrene/dioctyl phthalate solutions

We report viscometric data collected in a Couette rheometry on dilute, single‐solvent polystyrene (PS)/dioctyl phthalate (DOP) solutions over a variety of polymer molecular weights (5.5 × 10⁵ ≤ M_w ≤ 3.0 × 10⁶ Da) and system temperatures (288 K ≤ T ≤ 318 K). In view of the essential viscometric features, the current data may be classified into three categories: The first concerns all the investigated solutions at low shear rates, where the solution properties are found to agree excellently with the Zimm model predictions. The second includes all sample solutions, except for high‐molecular‐weight PS samples (M_w ≥ 2.0 × 10⁶ Da), where excellent time–temperature superposition is observed for the steady‐state polymer viscosity at constant polymer molecular weights. No similar superposition applies at a constant temperature but varied polymer molecular weights, however. The third appears to be characteristic of dilute high‐molecular‐weight polymer solutions, for which the effects of temperature on the viscosity curve are further complicated at high shear rates. The implications concerning the relative importance of hydrodynamic interactions, segmental interactions, and chain extensibility with increasing polymer molecular weight, system temperature, and shear rate are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 787–794, 2006     

Study on anti-emission materials for non-emitting grid applications in microwave power tubes

Hafnium and platinum were deposited onto molybdenum grids by ion-beam assisted deposition method. Electron-emission characteristics from molybdenum grids with Hf and Pt films, which were contaminated by active electron-emission substances (Ba, BaO) of the cathode, were measured using analogous diode method. The surfaces of grids were analyzed by X-ray diffraction. The results revealed that the reaction between BaO and Hf formed BaHfO₃ compound, which greatly reduced the accumulation of BaO on the surface and accordingly decreased grid emission. In contrast, Ba were formed by the decomposition of BaO on the surface of Pt film under high temperature and re-evaporated from its surface, which reduced the active electron-emission substances on the surface of the grid and effectively restrained grid emission. Their mechanisms for grid-emission suppression are discussed and a good method to develop new grid-coating materials is suggested.