Photodissociation tandem mass spectrometry at 266 nm of an aliphatic peptide derivatized with phenyl isothiocyanate and 4-sulfophenyl isothiocyanate

Photodissociation (PD) tandem mass spectra have been obtained at 266 nm for the protonated molecules of a tryptic peptide, ASHLGLAR, and of its phenyl isothiocyanate and 4-sulfophenyl isothiocyanate derivatives, generated by matrix-assisted laser desorption/ionization. Derivatization with the aromatic chromophores greatly reduced the intensity of the laser required for efficient PD. Major fragment ions observed in the three spectra are quite similar. General features of the PD tandem mass spectra and their potential utility for analytical purposes are discussed.     

bPAK-interacting exchange factor may regulate actin cytoskeleton through interaction with actin

p21-activated kinase (PAK)-interacting exchange factor (PIX) is known to be involved in regulation of Cdc42/Rac GTPases and PAK activity. PIX binds to the proline-rich region of PAK, and regulates biological events through activation of Cdc42/Rac GTPase. To further investigate the role of PIX we produced monoclonal antibodies (Mab) against bPIX. Three clones; N-C6 against N-terminal half and C-A3 and C-B7 against C- terminal half of bPIX were generated and characterized. N-C6 Mab detected bPIX as a major band in most cell lines. C-A3 Mab recognizes GIT-binding domain (GBD), but it does not interfere with GIT binding to bPIX. Using C-A3 Mab possible bPIX interaction with actin in PC12 cells was examined. bPIX Mab (C-A3) specifically precipitated actin of the PC12 cell lysates whereas actin Mab failed to immunoprecipitate bPIX. Co-sedimentation of PC12 cell lysates with the polymerized F-actin resulted in the recovery of most of bPIX in the cell lysates. These results suggest that bPIX may not interact with soluble actin but with polymerized F-actin and revealed that bPIX constitutes a functional complex with actin. These data indicate real usefulness of the bPIX Mab in the study of bPIX role(s) in regulation of actin cyoskeleton.     

Effect of interacting nanoparticles on the ordered morphology of block copolymer/nanoparticle mixtures

We investigated the effect of hard additives, that is, magnetic nanoparticles (NPs) and metal NPs, on the ordered morphology of block copolymers by varying the NP concentration. To characterize the structural changes of a block copolymer associated with different NP loadings, small-angle X-ray scattering and transmission electron microscopy were performed. Monodisperse maghemite (γ-Fe₂O₃) NPs (7 nm in diameter) and silver (Ag) NPs (6 nm in diameter) with surfaces modified with oleic acids were synthesized, and a cylinder-forming poly(styrene-block-isoprene) diblock copolymer was used as a structure-directing matrix for the NPs. As the NP concentration increased, domains of NP aggregates were observed for both magnetic and metal NPs. In the case of mixtures of cylinder-forming poly(styrene-block-isoprene) and Ag NPs with weak particle–particle interactions, random aggregates of Ag NPs were observed, and the ordered morphology of the block copolymer lost its long-range order with an increase in the NP concentration. However, regular, latticelike aggregates obtained with γ-Fe₂O₃ NPs, because of the strong interparticle interactions, induced an intriguing morphological transformation from hexagonal cylinders to body-centered-cubic spheres via undulated cylinders, whereas the neat block copolymer did not show such a morphological transition over a wide range of temperatures. The interplay between magnetic NPs and the block copolymer was also tested with magnetic NPs of different sizes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3571–3579, 2006     

Mimicry of tandem repeat peptides against cell surface carbohydrates

Our approach to multivalent peptide construction relies on tentacle peptides, also known as a multiple antigenic peptides, which contain two and four repeats of a selected peptide. In this communication, we report the results of preliminary studies aimed at (1) the selection of short peptides against the carbohydrate, sLeX, (2) the synthesis of tentacle dimers and tetramers of the selected peptides, and (3) the determination of affinities and specificities of the peptides to several related carbohydrates by using the surface plasmon resonance (SPR) and the equilibrium dialysis techniques. Binding affinity studies, as well as assays of in vitro binding of the peptides to a sLeX-specific cell line, have shown that the tetrameric peptides bind to the cell surface sugars.     

Notable coordination effects of 2-pyridinesulfonamides leading to efficient aziridination and selective aziridine ring opening

[reaction: see text] We have developed, on the basis of a chelation-strategy, an efficient copper-catalyzed aziridination protocol with the use of 5-methyl-2-pyridinesulfonamide and PhI(OAc)(2). The reaction proceeds smoothly under mild conditions to give aziridines in moderate to good yields in the absence of external ligands or bases. The coordination-assisted approach offers the additional benefits that efficient deprotection of the N-substituent and selective aziridine ring-opening are effectively achieved.     

Surface behavior of amphiphilic heteroarm star-block copolymers with asymmetric architecture

We study the surface behavior of the asymmetric amphiphilic heteroarm poly(ethylene oxide) (PEO)/polystyrene (PS) star polymer on solid substrate. These star polymers differ in both architecture (four- and three-arm molecules, PEO-b-PS(3) and PEO-b-PS(2)) and in the length of PS chains (molecular weight from about 10 000 up to 24 000). We observed that, for a given chemical composition with a predominant content of hydrophobic blocks, the compression behavior of the PS domain structure controls the surface behavior and the final morphology of the monolayers. New features of the surface behavior of star-block copolymers are high stretching of the PS arms from the interface and enhanced stability of the circular PS domain structure, even at high compression. We suggest that for asymmetric star-block copolymers both architecture and chemical composition heavily favor the formation of highly curved interfaces and, thus, more stable circular domain structure with stretched PS arms.     

Photophysical properties of porphyrin tapes

The novel fused Zn(II)porphyrin arrays (Tn, porphyrin tapes) in which the porphyrin macrocycles are triply linked at meso-meso, beta-beta, beta-beta positions have been investigated by steady-state and time-resolved spectroscopic measurements along with theoretical MO calculations. The absorption spectra of the porphyrin tapes show a systematic downshift to the IR region as the number of porphyrin pigments increases in the arrays. The fused porphyrin arrays exhibit a rapid formation of the lowest excited states (for T2, approximately 500 fs) via fast internal conversion processes upon photoexcitation at 400 nm (Soret bands), which is much faster than the internal conversion process of approximately 1.2 ps observed for a monomeric Zn(II)porphyrin. The relaxation dynamics of the lowest excited states of the porphyrin tapes were accelerated from approximately 4.5 ps for the T2 dimer to approximately 0.3 ps for the T6 hexamer as the number of porphyrin units increases, being explained well by the energy gap law. The overall photophysical properties of the porphyrin tapes were observed to be in a sharp contrast to those of the orthogonal porphyrin arrays. The PPP-SCI calculated charge-transfer probability indicates that the lowest excited state of the porphyrin tapes (Tn) resembles a Wannier-type exciton closely, whereas the lowest excited state of the directly linked porphyrin arrays can be considered as a Frenkel-type exciton. Conclusively, these unique photophysical properties of the porphyrin tapes have aroused much interest in the fundamental photophysics of large flat organic molecules as well as in the possible applications as electric wires, IR sensors, and nonlinear optical materials.     

Synthesis and characterization of novel aromatic polyamides from 3,4-bis(4-aminophenyl)-2,5-diphenylfuran and aromatic diacid chlorides

A new highly phenylated heterocyclic diamine, 3,4-bis(4-aminophenyl)-2,5-diphenylfuran, was synthesized in three steps from 4–-nitrodeoxybenzoin. The low temperature solution polycondensation of the diamine with various aromatic diacid chlorides afforded tetraphenylfuran-containing aromatic polyamides with inherent viscosities of 0.2–0.8 dL/g. Copolyterephthalamides were obtained from the diamine and 4,4′-oxydianiline. The polyamides were generally soluble in a wide range of solvents that included N,N-dimethylacetamide, N-methyl-2-pyrrolidone, pyridine, and m-cresol. Glass transition temperatures of the polyamides and copolyamides ranged from 302–342°C, and 10% weight loss was observed above 480°C in nitrogen.     

High levels of soluble herpes virus entry mediator in sera of patients with allergic and autoimmune diseases

Herpes virus entry mediator (HVEM) is a newly discovered member of the tumor necrosis factor receptor (TNFR) superfamily that has a role in herpes simplex virus entry, in T cell activation and in tumor immunity. We generated mAb against HVEM and detected soluble HVEM (SHVEM) in the sera of patients with various autoimmune diseases. HVEM was constitutively expressed on CD4(+) and CD8(+) T cells, CD19(+) B cells, CD14(+) monocytes, neutrophils and dendritic cells. In three-way MLR, mAb 122 and 139 were agonists and mAb 108 had blocking activity. An ELISA was developed to detect sHVEM in patient sera. sHVEM levels were elevated in sera of patients with allergic asthma, atopic dermatitis and rheumatoid arthritis. The mAbs discussed here may be useful for studies of the role of HVEM in immune responses. Detection of soluble HVEM might have diagnostic and prognostic value in certain immunological disorders.     

Alkyl Ammonium Ion Selectivity of Hexahomotrioxacalix[3]arene Triamide Derivative having the Intramolecular Hydrogen-Bonding Group

The lower rim functionalized hexahomotrioxacalix[3]arene triamide 4 with cone-conformation was synthesized from triol 1 by a stepwise reaction. The different extractability for alkali metal ions, transition metal ions, and alkyl ammonium ions from water into dichloromethane is discussed. Due to the strong intramolecular hydrogen bonding between the neighboring NH and CO groups in triamide 4, its affinity to metal cations was weakened. Triamide 4 shows a single selectivity to n-BuNH₃⁺. The anion complexation of triamide 4 was also studied by ¹H NMR titration experiments. Triamide 4 binds halides through the intermolecular hydrogen bonding among the NH hydrogens of amide in a 1:1 fashion in CDCl₃. The association constants calculated from these changes in chemical shifts of the amide protons are K_a = 223 M⁻¹ for Cl⁻ and K_a = 71.7 M⁻¹ for Br⁻. Triamide 4 shows a preference for Cl⁻ complexation than Br⁻ complexation.