Hybrid cross‐linked hydrogels as a technology platform for in vitro release of cephradine

Hydrogel‐based drug delivery systems can leverage therapeutically favorable upshots of drug release and found clinical uses. Hydrogels offer temporal and spatial control over the release of different therapeutic agents. Because of their tailor made controllable degradability, physical properties, and ability to prevent the labile drugs from degradation, hydrogels provide platform on which diverse physicochemical interactions with entrapped drugs cause to control drug release. Herein, we report the fabrication of novel vinyltrimethoxy silane (VTMS) cross‐linked chitosan/polyvinyl pyrrolidone hydrogels. Swelling in distilled water in conjunction with different buffer and electrolyte solutions was performed to assess the swellability of hydrogels. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and X‐ray diffraction (XRD) analysis were further conducted to investigate the possible interactions between components, thermal stability, and crystallinity of as‐prepared hybrid hydrogels, respectively. In vitro time‐dependent biodegradability, antimicrobial study, and cytotoxicity were also carried out to evaluate their extensive biocompatibility and cytotoxic behavior. More interestingly, in vitro drug release study allowed for the controlled release of cephradine. Therefore, this facile strategy developed the novel biocompatible and biodegradable hybrid hydrogels, which could significantly expand the scope of these hydrogels in other biomedical applications like scaffolds, skin regeneration, tissue engineering, etc.     

Spontaneous polarization buildup in a room-temperature polariton laser

We observe the buildup of strong (approximately 50%) spontaneous vector polarization in emission from a GaN-based polariton laser excited by short optical pulses at room temperature. The Stokes vector of emitted light changes its orientation randomly from one excitation pulse to another, so that the time-integrated polarization remains zero. This behavior is completely different from any previous laser. We interpret this observation in terms of the spontaneous symmetry breaking in a Bose-Einstein condensate of exciton polaritons.     

Interface Fluctuations for the D = 1 Stochastic Ginzburg–Landau Equation with Nonsymmetric Reaction Term

We consider a Ginzburg–Landau equation in the interval [?ε^?1, ε^?1], ε>0, with Neumann boundary conditions, perturbed by an additive white noise of strength $\sqrt {\varepsilon } $ and reaction term being the derivative of a function which has two equal–depth wells at ±1, but is not symmetric. When ε=0, the equation has equilibrium solutions that are increasing, and connect ?1 with +1. We call them instantons, and we study the evolution of the solutions of the perturbed equation in the limit ε→0⁺, when the initial datum is close to an instanton. We prove that, for times that may be of the order of ε^?1, the solution stays close to some instanton whose center, suitably normalized, converges to a Brownian motion plus a drift. This drift is known to be zero in the symmetric case, and, using a perturbative analysis, we show that if the nonsymmetric part of the reaction term is sufficiently small, it determines the sign of the drift.     

PNIPAAM Grafted Polymeric Monoliths Synthesized by the Reactive Gelation Process and their Swelling/Deswelling Characteristics

The production of macroporous monoliths functionalized with a thermo‐responsive polymer (PNIPAAM) is described. The surface functionalization was achieved by copolymerization of acrylic end capped atom transfer radical polymerization initiator (BPOEA) with divinylbenzene with or without styrene. Monoliths were generated by swelling them with styrene, BPOEA and divinylbenzene followed by gelation with salt and post polymerization. Subsequent grafting of these monoliths with PNIPAAM was achieved by atom transfer radical polymerization and their swelling deswelling characteristics quantified. The grafted monoliths provide a unique chromatographic stationary phase where adsorption/desorption can be driven by the use of temperature only.

     

Synthesis and characterization of some Schiff-base-containing polyimides

The diamine, 4-aminophenyloxy-N-4-[(4-amiophenyloxy)benzylidene]aniline, was prepared via the nucleophilic substitution reaction and was polymerized with different dianhydrides either by one-step solution polymerization reaction or two-step procedure. The latter includes ring-opening polyaddition to give poly(amic acid), followed by cyclodehydration to polyimides. The inherent viscosity ranges from 0.61–0.79 dl/g. Some of the polymers were soluble in most of the organic solvents such as DMSO, DMF, DMAc, NMP, and m-cresol even at room temperature. The degradation temperature of the resultant polymers falls in the ranges from 240–500 °C in nitrogen with only 10% weight loss. Specific heat capacity at 200 °C ranges from 1.0929–2.6275 J g⁻¹ k⁻¹. The temperature at which the maximum degradation of the polymer occurs ranges from 600–630 °C. The glass transition temperature (Tg) values of the polyimides ranged from 185 to 272 °C. The activation energy and enthalpy of the polyimides ranged from 47.5–55.0 kJ/mole and 45.7–53.0 kJ/mole and the moisture absorption in the range of 0.23–0.72%.     

Capillary forces: influence of roughness and heterogeneity

A formalism is described to calculate capillary forces between solid surfaces analytically. Assumptions are that the liquid menisci (1) have a much larger extension parallel to the gap than normal and (2) are formed by capillary condensation and are in equilibrium with the vapor. To calculate capillary forces, first the gap between the two surfaces is described by a height distribution function. Roughness is considered with an asperity distribution function. Both distributions can at least in principal be measured by light, electron, or atomic force microscopy or grazing incidence X-ray reflectivity. The total capillary force versus distance or vapor pressure is obtained by a convolution of both distributions and an integration. The formalism is applied to calculate the capillary force between rough spherical particles. In addition, a method to consider surface heterogeneity is suggested.     

Generalization of Popoviciu-Type Inequalities Via Fink’s Identity

We obtained useful identities via Fink’s identity, by which the inequality of Popoviciu for convex functions is generalized for higher order convex functions. We investigate the bounds for the identities related to the generalization of the Popoviciu inequality using inequalities for the ?eby?ev functional. Some results relating to the Grüss- and Ostrowski-type inequalities are constructed. Further, we also construct new families of exponentially convex functions and Cauchy-type means by looking at linear functional associated with the obtained inequalities.     

CALCULATION OF THE YOUNG’S MODULUS OF AN ADSORBED POLYMER LAYER

 Polymer layers adsorbed to a surface or in a confined environment often change their mechanical properties. There is even the possibility of solidification of the confined layer. To judge the stiffness of such a layer, we used the Hertz model to calculate the Young’s modulus of the polymer layer in the confinement of AFM experiments with silicon nitride tip with a radius of curvature of R » 50 nm and a glass sphere attached to the cantilever R = 5 mm. Since there is no visible indentation of the layer in the AFM experiments, the layer is either penetrated very easily, or the indentation is too small to be seen in a force curve. The latter would be the case for a polymer layer with a Young’s modulus above 4 ´ 10⁸ Pa in case of an experiment with a silicon nitride tip and 4 ´ 10⁵ Pa in case of a glass sphere.     

Nanowear on polymer films of different architecture

In this paper, we describe atomic force microscope (AFM) friction experiments on different polymers. The aim was to analyze the influence of the physical architecture of the polymer on the degree and mode of wear and on the wear mode. Experiments were carried out with (1) linear polystyrene (PS) and cycloolefinic copolymers of ethylene and norbornene, which are stabilized by entanglements, (2) mechanically stretched PS, (3) polyisoprene-b-polystyrene diblock copolymers, with varying composition, (4) brush polymers consisting of a poly(methyl methacrylate) (PMMA) backbone and PS side chains, (5) PMMA and PS brushes grafted from a silicon wafer, (6) plasma-polymerized PS, and (7) chemically cross-linked polycarbonate. For linear polymers, wear depends critically on the orientation of the chains with respect to the scan direction. With increasing cross-link density, wear was reduced and ripple formation was suppressed. The cross-linking density was the dominating material parameter characterizing wear.     

Exploiting barrier distributions to investigate breakup effects in the fusion of 9Be+208Pb

The availability of precisely measured fusion excitation functions have allowed the determination of experimental fusion barrier distributions. This concept is utilised in ⁹Be+²⁰⁸Pb reaction, to reliably predict the expected complete fusion cross-sections. However, the measured cross-sections are found to be only 68% of those predicted. The large cross-sections observed for incomplete fusion products support the interpretation that this suppression of fusion is caused by ⁹Be breaking up into charged fragments before reaching the fusion barrier.