On the validity of an einstein relation in models of interface dynamics

We consider models of interface dynamics derived from Ising systems with Kac interactions and we prove the validity of the Einstein relation=, where is the proportionality coefficient in the motion by curvature, is the interface mobility, and is the surface tension.     

Low thresholds for a nonconventional polymer blend—Amplified spontaneous emission and lasing in F81−x:SYx system

A mixture of two polymer materials, poly (9,9‐dioctylfluorene) (F8), and one of the poly(para‐phenylenevinylene) derivatives, superyellow (SY) have been used to make F8_1?x:SY_x polymer blend system. Under a 3–5 ns pulsed‐laser excitation, this system showed excellent optical properties with low threshold values of ≈14 µJ/cm² and ≈8 µJ/cm² for amplified spontaneous emission and optically pumped lasing, respectively. The proposed system was also electroluminescent and an interesting candidate for future research on polymer injection lasers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 15–21     

Influence of surfactant transport suppression on dynamic contact angle hysteresis

The influence of local and nonlocal transport processes of cetyltrimethylammonium bromide (CTAB) molecules on dynamic contact angles and contact angle hysteresis was studied in a rotating drum setup. The influence of long-range surfactant transport was analyzed by hindering selectively the surface or the bulk transport via movable barriers. With increasing hindrance of the surfactant transport, the receding contact angle decreased at all withdrawing velocities in the presence of CTAB. The control experiment with pure water was unaffected by the presence of the barriers. Dynamic contact angles are, therefore, not only influenced by short-range effects like Marangoni stresses close to the contact line, but also by long-range transport processes (like diffusion and advection) between the regions close to the receding and advancing contact lines.     

Nanoadhesion on Rigid Methyl‐Terminated Biphenyl Thiol Monolayers: A High‐Rate Dynamic Force Spectroscopy Study

Nanoadhesion on a self‐assembled monolayer of 4‐methyl‐4′‐mercaptobiphenyl is measured using a modified atomic force microscope. The dependence of the adhesion force on the loading rate is analyzed with the Dudko–Hummer–Szabo model, and the kinetic and interaction potential parameters for a single terminal group are extracted. The energy and location of the activation barrier suggest that the adhesion is dominated by van der Waals dispersion forces. The humidity effect on the nanoadhesion is also studied. The results are compared with previously measured values for methyl‐terminated alkane thiols and the influence of the thiol rigidity on the adhesion force is discussed.     

Efficient Ru(II)-catalyzed asymmetric hydrogenation of simple ketones with C2-symmetric planar chiral metallocenyl phosphinooxazoline ligands

C₂-symmetric metallocenyl planar phosphinooxazoline ligands (2 and 3) have been applied in the Ru(II)-catalyzed asymmetric hydrogenation of simple ketones. This type of ligands enjoys the advantages of dual reaction sites as well as larger steric hindrance than their corresponding C₁-symmetric counterparts. As a result, almost quantitative conversions and excellent enantioselectivities were obtained for a series of simple ketones. Under the optimal reaction conditions, up to 99.7% ee was obtained in many cases. It was also confirmed that hydrogen rather than reaction solvent i-PrOH is at work in the hydrogenation procedure.     

Determination of perfluorinated alkyl acid concentrations in biological standard reference materials

Standard reference materials (SRMs) are homogeneous, well-characterized materials used to validate measurements and improve the quality of analytical data. The National Institute of Standards and Technology (NIST) has a wide range of SRMs that have mass fraction values assigned for legacy pollutants. These SRMs can also serve as test materials for method development, method validation, and measurement for contaminants of emerging concern. Because inter-laboratory comparison studies have revealed substantial variability of measurements of perfluoroalkyl acids (PFAAs), future analytical measurements will benefit from determination of consensus values for PFAAs in SRMs to provide a means to demonstrate method-specific performance. To that end, NIST, in collaboration with other groups, has been measuring concentrations of PFAAs in a variety of SRMs. Here we report levels of PFAAs and perfluorooctane sulfonamide (PFOSA) determined in four biological SRMs: fish tissue (SRM 1946 Lake Superior Fish Tissue, SRM 1947 Lake Michigan Fish Tissue), bovine liver (SRM 1577c), and mussel tissue (SRM 2974a). We also report concentrations for three in-house quality-control materials: beluga whale liver, pygmy sperm whale liver, and white-sided dolphin liver. Measurements in SRMs show an array of PFAAs, with perfluorooctane sulfonate (PFOS) being the most frequently detected. Reference and information values are reported for PFAAs measured in these biological SRMs.

Observation of Psi(3770)-->gammachi(c1)-->gammagammaJ/Psi

From e(+)e(-) collision data acquired with the CLEO detector at the Cornell Electron Storage Ring, we observe the non-DD(_) decay Psi(3770))-->gammachi(c1) with a statistical significance of 6.6 standard deviations, using the two-photon cascades to J/Psi and J/Psi-->l(+)l(-). We determine sigma(e(=)e(-)-->Psi(3770))xBeta(Psi(3770)-->gammachi(c1))=(18.0 +/- 3.3 +/- 2.5) pb and branching fraction Beta(Psi(3770)-->gammachi(c1)=(2.8 +/- 0.5+/-0.4) x 10(-3). We set 90% C.L. upper limits for the transition to chi(c2) (chi(c0)): sigma x Beta<5.7 pb (<282 pb) and Beta<0.9 x 10(-3) (<44 x 10(-3)). We also determine Gamma(Psi(3770)gammachi(c1))/Gamma(Psi(3770)-->pi(+)pi(-)J/Psi)=1.5 +/- 0.3 +/- 0.3 (>1.0 at 90% C.L.), which bears upon the interpretation of X(3872).     

Investigation of the activation-parameters of low-temperature slip in cubic metals

The macroscopic critical resolved shear stress (CRSS)τ of 9 body-centred cubic (BCC) and 5 face-centred cubic (FCC) metals has been found to vary with temperatureT in the range 0 to 300 K as given by: lnτ=A − BT, whereA andB are positive constants. Theτ−T data have been analysed within the framework of a kink-pair nucleation (KPN) model of plastic flow in crystals. The microscopic parameters of the unit activation process of yielding, e.g. the initial length of the glide dislocation segment, the critical height of the kink-pair nucleated in it, the activation volume associated with the CRSS, and the binding energy per interatomic spacing along the glide dislocation in the slip plane etc., have been evaluated. A consistent picture of the dislocation kinetics involved in the yielding of BCC and FCC metals emerges, which is adequately described by the KNP model of plastic flow in crystals.     

Design,synthesis, antitubercular and antibacterial activities of pyrrolo[3,2-b]pyridine-3-carboxamide linked 2-methoxypyridine derivatives and in silico docking studies

Abstract

A novel series pyrrolo[3,2-b]pyridine-3-carboxamide linked 2-methoxypyridine derivatives have been designed, synthesized and confirmed by FT-IR, ¹H NMR, ¹³C NMR, ¹⁹F NMR, MS, and elemental analysis. The synthesized compounds were screened for their antitubercular activity using microplate alamar blue assay method and antibacterial activity. Among the tested compounds, 4- fluorophenyl (8m), 4- chlorophenyl (8n) and 4-methoxyphenyl (8i) showed potent anti-TB activity (3.12?µg/mL) in comparison with reference drug, Pyrazinamide ((3.12?µg/mL). In addition, all compounds were docked into DprE1 (PDB code: 4KW5) to explore their binding interactions at the active site. The compounds exhibited essential key interactions as that of reported DprE1 inhibitors and hence, the synthesized compounds may be considered as molecular scaffolds for antitubercular activity. Compounds, 4-chlorophenyl (8n) and 4-flurophenyl (8m) showed significant antibacterial activity against Escherichia coli and Staphylococcus aureus strains. In silico prediction of toxicities, druglikeness and drug score profiles of the tested compounds are promising.     

Mössbauer study of corrosion of mild steel induced by acid rain

Room temperature corrosion studies have been made on the rust of commercially available mild steel in a simulated acid rain environment using the method of transmission Mössbauer spectroscopy. The main corrosion products identified are α-FeOOH, γ-FeOOH, and a product with unfamiliar parameters which seems to be amorphous in nature (being very large linewidth ?2.5 mm/s) and may be considered as an intermediate phase. A small amount of γ-Fe₂O₃ (6–8%) is also observed.