Study of oxidation of alloy 1.4306S (SS-304L) in air and steam at 1200°C using the Mössbauer technique

The Mössbauer technique has been used to study the oxidation of alloy 1.4306S (SS-304L) at 1200°C exposed in atmospheres of air and steam, for, 1, 6, 24, 100 and 400 hours. By oxidation in air the major products are -FE₂O₃, -FE₂O₃, and Fe₃O₄ while, during oxidation in steam they are -FeOOH, -Fe₂O₃ and Fe₃O₄. A minor phase detected following both kinds of oxidation may be ascribed to MnCrFeO₄, Cr₂FeO₄, -FeOOH and -FeOOH produced in steam only while the base material is found following air oxidation. The proportion of Fe₃O₄ on the scale remains constant for all exposure durations in air oxidation, while it becomes constant in steam oxidation only in cases where the entire sample has been oxidized.     

Room-temperature polariton lasing in semiconductor microcavities

We observe a room-temperature low-threshold transition to a coherent polariton state in bulk GaN microcavities in the strong-coupling regime. Nonresonant pulsed optical pumping produces rapid thermalization and yields a clear emission threshold of 1 mW, corresponding to an absorbed energy density of 29 microJ cm-2, 1 order of magnitude smaller than the best optically pumped (In,Ga)N quantum-well surface-emitting lasers (VCSELs). Angular and spectrally resolved luminescence show that the polariton emission is beamed in the normal direction with an angular width of +/-5 degrees and spatial size around 5 microm.     

Confined polymer melts studied by atomic force microscopy

Using an atomic force microscope (AFM) the interaction between an AFM tip and different planar solid surfaces have been measured across a long-chain poly(dimethyl siloxane) (PDMS, M_W = 18,000 g/mol), a short-chain PDMS (M_W = 4200 g/mol), a poly(ethylmethyl siloxane) (PEMS, M_W = 16,800 g/mol), and a diblock copolymer consisting of one PDMS and one PEMS block (PDMS-b-PEMS, M_W = 15,100 g/mol). The interaction changed significantly during the first 10 h after immersing the solids in the polymer melt. This demonstrates that the time scale of structural changes at a solid surface is much slower than in the bulk. On mica and silicon oxide both polymers formed an immobilized “pinned” layer beyond which a monotonically decaying repulsive force was observed. Attractive forces were observed with short-chain PDMS on silicon oxide and PEMS on mica and silicon oxide. On the basal plane of graphite PEMS caused a stable, exponentially decaying oscillatory force.     

Chromatographic behavior of a polyclonal antibody mixture on a strong cation exchanger column. Part II: Adsorption modelling

The adsorption of a polyclonal IgG mixture on a strong cation exchanger column is characterized using a detailed multi-component pore model. This model is explicit in all transport parameters and includes salt dependent isotherms. As discussed in the first part of this work, the IgG mixture can be simplified by considering two pseudo-variants only. Linear gradient experiments are used to fit the salt dependent adsorption isotherms and the mass transport parameters for the two pseudo-variants. Using the model, breakthrough curves are predicted with good accuracy. The model is also implemented to visualize the axial and radial concentration profiles of the two pseudo-variants in the column during a loading experiment.     

Investigation of the activation-parameters of low-temperature slip in cubic metals

The macroscopic critical resolved shear stress (CRSS)τ of 9 body-centred cubic (BCC) and 5 face-centred cubic (FCC) metals has been found to vary with temperatureT in the range 0 to 300 K as given by: lnτ=A − BT, whereA andB are positive constants. Theτ−T data have been analysed within the framework of a kink-pair nucleation (KPN) model of plastic flow in crystals. The microscopic parameters of the unit activation process of yielding, e.g. the initial length of the glide dislocation segment, the critical height of the kink-pair nucleated in it, the activation volume associated with the CRSS, and the binding energy per interatomic spacing along the glide dislocation in the slip plane etc., have been evaluated. A consistent picture of the dislocation kinetics involved in the yielding of BCC and FCC metals emerges, which is adequately described by the KNP model of plastic flow in crystals.     

Morphosynthesis of strontianite nanowires using polyacrylate templates tethered onto self-assembled monolayers

Strontianite nanowires have been synthesized on self-assembled monolayers (SAM) in the presence of polyacrylate templates. The morphology of this product exhibits characteristic differences from that of products obtained in the absence of polyacrylate. It is demonstrated that the template-induced crystallization process involves the interaction between the SAM surface, polyacrylate (a dissolved polyelectrolyte), and the cations/anions in solution. By the combination of these components, hierarchically ordered mineral hybrid structures are formed.     

Low thresholds for a nonconventional polymer blend—Amplified spontaneous emission and lasing in F81−x:SYx system

A mixture of two polymer materials, poly (9,9‐dioctylfluorene) (F8), and one of the poly(para‐phenylenevinylene) derivatives, superyellow (SY) have been used to make F8_1?x:SY_x polymer blend system. Under a 3–5 ns pulsed‐laser excitation, this system showed excellent optical properties with low threshold values of ≈14 µJ/cm² and ≈8 µJ/cm² for amplified spontaneous emission and optically pumped lasing, respectively. The proposed system was also electroluminescent and an interesting candidate for future research on polymer injection lasers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 15–21