Synthesis and Characterization of Functionalized Nanosilica for Zinc Ion Mitigation; Experimental and Computational Investigations

Zinc is an essential trace metal and its concentration above 4ppm reduces the aesthetic value of water. This study explores the possibility of using functionalized nanohybrids as Zn(II) ion scavengers from aqueous solution. Functionalized nanohybrids were synthesized by the attachment of thiosemicarbazide to silica. The material was characterized by TGA, SEM, FTIR, EDX, and BET analysis, which revealed ligand bonding to silica. The functionalized silica was employed as Zn(II) ion extractant in batch experiments and removed about 94.5% of the Zn(II) ions at pH 7, near zero point charge (6.5) in 30 min. Kinetics investigations revealed that zinc adsorption follows an intra particle diffusion mechanism and first-order kinetics (K = 0.1020 min⁻¹). The data were fitted to Freundlich, Dubinin–Radushkevich, and Langmuir models and useful ion exchange parameters were determined. The impact of co-existing ions on Zn(II) ion sequestration was also studied and it was found that the adsorbent can be used for selective removal of zinc with various ions in the matrix. Quantum mechanical investigations revealed that the Zn(II) ion adsorption on ZnBS1 is more favorable, having higher binding energy (BE) (−178.1 kcal/mol) and ∆H (−169.8), and making tridentate complex with the N and S sites of the chelating ligand. The negative ∆G and BE values suggest highly spontaneous Zn(II) adsorption on the modified silica even at low temperatures.     

Form Factor and rms Radius of Proton Predicted Using Differential Cross-Section Data of $${p\bar{p}}$$ Elastic Scattering at $${\sqrt{s}=31}$$ , 53, 62 and 1960 GeV

Physics of Atomic Nuclei - Using differential cross-section data on $$p\bar{p}$$ elastic scattering at $$\sqrt{s}=31$$ , 53, 62, and 1960 GeV, for low momentum transfer square (...     

An efficient protocol for the synthesis of highly sensitive indole imines utilizing green chemistry: optimization of reaction conditions

Novel and highly sensitive indole-based imines have been synthesized. Their synthesis has been compared employing a variety of protocols. Ultimately, a convenient, economical and high yielding set of conditions employing green chemistry have been designed for their synthesis.     

One-Pot Synthesis of Heterobimetallic Metal–Organic Frameworks (MOFs) for Multifunctional Catalysis

A one-pot synthesis of bimetallic metal–organic frameworks (Co/Fe-MOFs) was achieved by treating stoichiometric amounts of Fe and Co salts with 2-aminoterephthalic acid (NH₂-BDC). Monometallic Fe (catalyst A) and Co (catalyst F) were also prepared along with mixed-metal Fe/Co catalysts (B–E) by changing the Fe/Co ratio. For mixed-metal catalysts (B–E) SEM energy-dispersive X-ray (EDX) analysis confirmed the incorporation of both Fe and Co in the catalysts. However, a spindle-shaped morphology, typically known for the Fe-MIL-88B structure and confirmed by PXRD analysis, was only observed for catalysts A–D. To test the catalytic potential of mixed-metal MOFs, reduction of nitroarenes was selected as a benchmark reaction. Incorporation of Co enhanced the activity of the catalysts compared with the parent NH₂-BDC-Fe catalyst. These MOFs were also tested as electrocatalysts for the oxygen evolution reaction (OER) and the best activity was exhibited by mixed-metal Fe/Co-MOF (Fe/Co batch ratio=1). The catalyst provided a current density of 10 mA cm⁻² at 410 mV overpotential, which is comparable to the benchmark OER catalyst (i.e., RuO₂). Moreover, it showed long-term stability in 1 m KOH. In a third catalytic test, dehydrogenation of sodium borohydride showed high activity (turnover frequency=87 min⁻¹) and hydrogen generation rate (67 L min⁻¹ g⁻¹ catalyst). This is the first example of the synthesis of bimetallic MOFs as multifunctional catalysts particularly for catalytic reduction of nitroarenes and dehydrogenation reactions.     

Fukuyama reduction,Fukuyama coupling and Fukuyama–Mitsunobu alkylation: recent developments and synthetic applications

Fukuyama reaction for the synthesis of multifunctional aldehydes, secondary amines and ketones has gained considerable importance in synthetic organic chemistry because of mild reaction conditions. The use of thioesters in both Fukuyama aldehydes and ketones synthesis is highly attractive for organic chemists as they are easily accessible from corresponding carboxylic acids. Fukuyama–Mitsunobu reaction utilizes 2-nitrobenzenesulfonyl (Ns) for the protection/activation/deprotection of primary amines to afford secondary amines in good yields and high enantioselectivities. This review presents recent synthetic developments and applications of Fukuyama reaction for the synthesis of aldehydes, secondary amines and ketones.

Graphic abstract

     

Synthesis, chemical characterization and biological screening for cytotoxicity and antitumor activity of organotin (IV) derivatives of 3,4-methylenedioxy 6-nitrophenylpropenoic acid

A series of mono-, di- and triorganotin compounds with general formulae [RSnL(2)Cl], R = Bu (compound 3), [R(2)SnL(2)], where R = Me, Et, Bu, Oct (compounds 1, 2, 4 and 6) and [R(3)SnL], where R = Bu, Cy and Ph (compounds 5, 7 and 8) and where L = 3,4-methylenedioxy-6-nitrophenylpropenoic acid have been prepared and characterized by elemental analysis, multinuclear ((1)H-, (13)C- and (119)Sn-) NMR and mass spectrometry. The ligand and its respective organotin complexes were screened for cytotoxicity using the brine shrimp lethality assay and for antitumor activity using the crown gall tumor inhibition (potato disc) assay. The bioassay results support the conclusion that the biological activities of these synthetic compounds are in the following order: [RSnL(2)Cl] < [R(2)SnL(2)] < [R(3)SnL].     

Profiling of Antifungal Activities and In Silico Studies of Natural Polyphenols from Some Plants

A worldwide increase in the incidence of fungal infections, emergence of new fungal strains, and antifungal resistance to commercially available antibiotics indicate the need to investigate new treatment options for fungal diseases. Therefore, the interest in exploring the antifungal activity of medicinal plants has now been increased to discover phyto-therapeutics in replacement to conventional antifungal drugs. The study was conducted to explore and identify the mechanism of action of antifungal agents of edible plants, including Cinnamomum zeylanicum, Cinnamomum tamala, Amomum subulatum, Trigonella foenumgraecum, Mentha piperita, Coriandrum sativum, Lactuca sativa, and Brassica oleraceae var. italica. The antifungal potential was assessed via the disc diffusion method and, subsequently, the extracts were assessed for phytochemicals and total antioxidant activity. Potent polyphenols were detected using high-performance liquid chromatography (HPLC) and antifungal mechanism of action was evaluated in silico. Cinnamomum zeylanicum exhibited antifungal activity against all the tested strains while all plant extracts showed antifungal activity against Fusarium solani. Rutin, kaempferol, and quercetin were identified as common polyphenols. In silico studies showed that rutin displayed the greatest affinity with binding pocket of fungal 14-alpha demethylase and nucleoside diphosphokinase with the binding affinity (K_d, −9.4 and −8.9, respectively), as compared to terbinafine. Results indicated that Cinnamomum zeylanicum and Cinnamomum tamala exert their antifungal effect possibly due to kaempferol and rutin, respectively, or possibly by inhibition of nucleoside diphosphokinase (NDK) and 14-alpha demethylase (CYP51), while Amomum subulatum and Trigonella foenum graecum might exhibit antifungal potential due to quercetin. Overall, the study demonstrates that plant-derived products have a high potential to control fungal infections.     

Carbon-based nanocatalyst: An efficient and recyclable heterogeneous catalyst for one-pot synthesis of gem-bisamides,hexahydroacridine-1,8-diones and 1,8-dioxo-octahydroxanthenes

Journal of the Iranian Chemical Society - In this abstract, we discuss the progress related to sulfonated carbon-based materials in various acid-catalyzed organic transformations which are then...     

Fabrication and characterization of adenine-grafted carbon-modified amorphous ZnO with enhanced catalytic activity

Sustainability has become a countersign and guiding rule for current field of nanocatalysis. Herein, we report a cost-effective, greener, clean, and proficient process for the formation of adenine-grafted carbon-modified amorphous ZnO nanocatalyst (ZnO@AC) derived from garment industry waste (waste cotton cloth). Due to adenine functionality, catalyst provides consistent dispersion of ZnO providing catalytically active sites for the synthesis of pyrano[2,3-d]pyrimidines and bis(pyrazol-5-ole) and alters the electron–hole pair recombination without notable mass-transfer limitation. The photocatalytic evaluation of ZnO@AC was performed on methyl orange (MO) dye under UV light and 87.3% degradation efficiency resulted in 75 min. Moreover, the catalyst was recyclable and could be reused up to eight runs, making it more sustainable. The morphology of ZnO@AC remained intact with the slight agglomeration of ZnO nanoparticles (nps) after eight recoveries according to the transmission electron microscopy (TEM) image of the used catalyst.