A study of the UV—visible absorption spectrum of molecular chlorine

The UV—visible absorption spectrum of molecular chlorine at 298 K was investigated in the wavelength range 200–550 nm with a spectral resolution of 0.2 nm. Except for minor discrepancies, the absorption cross-sections are in agreement with those found in the literature. In the region 250λ-550 nm, the Cl₂ spectrum can be adequately described by a semi-empirical function of the wavelength A (in vacuum) and temperature T

Full-size image

where TANH=tanh(hcx559.751 cm⁻¹/2kT). The absorption of solar radiation by the weak continuum around λ_max=406.5 nm contributes 9% or more of the photodissociation of molecular chlorine in the atmosphere, but the banded Cl₂ features (λ 479 nm) are of negligible atmospheric significance.     

Sorption/diffusion behaviour of anionic surfactants in polyacrylamide hydrogels: from experiment to modelling

The sorption and diffusion processes of anionic surfactants with different chain length through polyacrylamide hydrogels with low swelling degree have been studied by electrical conductivity measurements. The multicomponent equilibrium equation has been used to model the sorption isotherms of different anionic surfactant in the hydrogels. Such isotherms show that initial rapid sorption of unimer surfactant into the membranes occurs, suggesting that non-freezing water can be involved in these interactions. In aqueous solution, at concentrations near and above the critical micelle concentration an anti-co-operative region is found. The diffusion coefficients of the anionic surfactants inside the hydrogel matrix show that the mobility of diffusing surfactant entities is dependent on cross-linker concentration and chain length. The Cukier hydrodynamic model and the free volume theory as modified by Peppas and Reinhart were applied to explain the dependence of the diffusion coefficients of surfactant on surfactant concentration inside the hydrogel. The hydrodynamic model was applied with success to the more hydrophilic surfactant, sodium 1-octanesulfonate, showing that the diffusion coefficients, D, increase when the resistance to hydrodynamic medium decreases; when the surfactant chain length increases (sodium dodecyl sulfate and sodium 1-hexadecane sulphonate) the variation of D with the free volume can only be understood considering the sieving effect produced by the surfactant inside gel.     

Spermine participates in oxidative damage of guanosine and 8-oxoguanosine leading to deoxyribosylurea formation

Oxidation of single- or double-stranded DNA containing a 7,8-dihydro-8-oxoguanosine lesion with the one-electron oxidant Na2IrCl6 in the presence of spermine led to formation of a covalent adduct that was analyzed by gel electrophoresis, HPLC, ESI-MS, and UV-vis. The adduct was labile to heat, exhibiting a t1/2 of 12 h at 37 degrees C, and the ultimate hydrolysis product was characterized as a deoxyribosylurea lesion. Data from model studies with 1,3-diaminopropane vs 1,4-diaminobutane are consistent with initial formation of a C5 spermine adduct from a dehydro-8-oxoguanosine intermediate, followed by rearrangement to a spiroaminal subject to slow hydrolysis at C4 of the purine. Spermine adducts could also be formed from oxidation of the analogous G-containing oligomer from reaction with singlet oxygen, albeit in lower yield. These results are surprising in light of the traditional view that spermine is radioprotective against DNA oxidation.     

What drives the precipitation of long-chain calcium carboxylates (soaps) in aqueous solution?

The interaction of sodium octanoate, decanoate or dodecanoate with calcium(ii) in aqueous solutions has been studied using turbidity, conductivity and potentiometric measurements. These show a marked alkyl chain length dependence on the behaviour. At the calcium concentration used (1.0 mM), there is little interaction with the octanoate, the decanoate shows initially formation of a 1:1 complex, followed by precipitation, while the dodecanoate precipitates at low surfactant concentrations. The solid calcium carboxylates were prepared, and show lamellar, bilayer structures with planes of calcium(II) ions coordinated to carboxylate groups through bidentate chelate linkages. Thermogravimetry and elemental analyses indicate the presence of coordinated water with the calcium decanoate but not with longer chain carboxylates. The results of both the solution and solid state studies suggest that precipitation of long-chain carboxylates depends on a balance between hydration effects and hydrophobic (largely van der Waals') interactions. Electrostatic effects make little energetic contribution but play the important structural role of ordering the carboxylate anions before precipitation. Differences are observed in the interactions between calcium(II) and long chain alkylcarboxylates and alkylsulfates, and are interpreted in terms of stronger binding to the metal of the carboxylate group. A general mechanism is proposed for calcium carboxylate precipitation from aqueous solution based on this and previous studies.     

Determination of Aggregation Parameters of Hexadecyltrimethylammonium Bromide from Probe Absorption

The mean aggregation number (n) and the critical micelle concentrations (CMC) of reverse micelles formed by hexadecyltrimethylammonium bromide have been determined by means of an optical absorption probe (acridine orange). The procedure to obtain these quantities from absorption spectrophotometric measurements is described. The CMC and mean aggregation number are in satisfactory agreement with published results obtained from more sophisticated methods.     

Fluorescence study of the interaction between metal ions and methyl methacrylate–methacrylic acid copolymers in aqueous solutions: thallium(I), calcium(II), and terbium(III)

 The binding of the cations thallium(I), calcium(II) and terbium(III) to methyl methacrylate– methacrylic acid copolymers with different fractions of acid groups (x) has been studied in aqueous solution at various pH values using the fluorescence of covalently bonded 9-vinyl anthracene as a probe. In all cases, the extent of binding increases as a function of the charge of the polymer with either increasing fraction of carboxylic acids or of pH. However, differences are observed in the behavior of the three cations. With Tl(I), quenching of the anthracene group fluorescence is observed, indicating that the thallium(I) approaches the probe and suggesting that the alkylanthracene is probably in a relatively polar region. Binding constants have been determined from anthracene quenching data and from studies with the fluo-rescent-probe sodium pyrenetetra-sulfonate. Good agreement is obtained between the two methods, and values for the binding constants increase from 250 to 950 M^-1 as x increases from 0.39 to 1. It is suggested that the cation is held in the polyelectrolyte domain, partly by Debye–Hückel effects and partly by more specific interactions. Stronger binding is found with calcium(II) and terbium(III), and in this case increases in fluorescence intensity are observed on complexation due to the anthracene group being in a more hydrophobic region, probably as a result of conformational changes in the polymer chain. In the former case the stoichiometry of the interaction was determined from the fluorescence data to involve two carboxylate groups bound per calcium. Association constants were found using murexide as an indicator of free calcium to vary from 8400 to 37 000 M^-1 as x increases from 0.39 to 1. It is suggested that in this case specific calcium(II)–carboxylate interactions contribute to the binding. With terbium(III), a greater increase in the probe fluorescence intensity was observed than with calcium, and it is suggested that the interaction with the polymer is even stronger, leading to a more pronounced conformational change in the polymer. It is proposed that the terbium(III) interacts with six carboxylic groups on the polymer chain, with three being coordinated and three attracted by electrostatic interactions. Received: 10 June 1997 Accepted: 24 October 1997     

Transport properties of alkyltrimethylammonium bromide surfactants in aqueous solutions

Differential mutual diffusion coefficients of n-alkyltrimethylammonium bromides [CH₃(CH₂)_n–1N(CH₃)₃Br, C_nTAB] (n=10, 12, 14, 16) have been measured in aqueous solutions at 298.15 K using a conductimetric cell and an automatic apparatus to follow diffusion. The cell is based on an open-ended capillary, and the technique follows the diffusion process by measuring the resistance of a solution inside the capillaries at various times. The electrical conductances of those solutions have also been measured to calculate the critical micellar concentration (cmc). Thermodynamic analysis of the data suggests that the free ion concentration decreases at concentrations above the cmc, in agreement with theoretical predictions. The obtained values of the micellization parameters were used to model the mutual diffusion coefficients of C_nTAB aqueous solutions.     

Substitution and derivatization reactions of a water soluble iron(II) complex containing a self-assembled tetradentate phosphine ligand

Facile substitution reactions of the two water ligands in the hydrophilic tetradentate phosphine complex cis-[Fe{(HOCH2)P{CH2N(CH2P(CH2OH)2)CH2}2P(CH2OH)}(H2O)2](SO4) (abbreviated to [Fe(L1)(H2O)2](SO4), 1) take place upon addition of Cl-, NCS-, N3(-), CO3(2-) and CO to give [Fe(L1)X2] (2, X = Cl; 4, X = NCS; 5, X=N3), [Fe(L1)(kappa2-O(2)CO)], 6 and [Fe(L1)(CO)2](SO4), 7. The unsymmetrical mono-substituted intermediates [Fe(L1)(H2O)(CO)](SO(4)) and [Fe(L(1))(CO)(kappa(1)-OSO(3))] (8/9) have been identified spectroscopically en-route to 7. Treatment of 1 with acetic anhydride affords the acylated derivative [Fe{(AcOCH2)P{CH2N(CH2P(CH2OAc)2)CH2}2P(CH2OAc)}(kappa2-O(2)SO2)] (abbreviated to [Fe(L2)(kappa2-O(2)SO2)], 10), which has increased solubility over 1 in both organic solvents and water. Treatment of 1 with glycine does not lead to functionalisation of L1, but substitution of the aqua ligands occurs to form [Fe(L(1))(NH(2)CH(2)CO(2)-kappa(2)N,O)](HSO(4)), 11. Compound 10 reacts with chloride to form [Fe(L(2))Cl(2)] 12, and 12 reacts with CO in the presence of NaBPh4 to form [Fe(L2)Cl(CO)](BPh4) 13b. Both of the chlorides in 12 are substituted on reaction with NCS- and N3(-) to form [Fe(L2)(NCS)2] 14 and [Fe(L2)(N3)2] 15, respectively. Complexes 2.H2O, 4.2H2O, 5.0.812H2O, 6.1.7H2O, 7.H2O, 10.1.3CH3C(O)CH3, 12 and 15.0.5H2O have all been crystallographically characterised.     

Effect of terbium(III) chloride on the micellization properties of sodium decyl- and dodecyl-sulfate solutions

The effect of TbCl3 on the aggregation processes of the anionic surfactants sodium decyl sulfate (SDeS) and sodium dodecyl sulfate (SDS) has been investigated. Electrical conductivity data, combined with Tb(III) luminescence measurements suggest that the formation of micelles involving TbCl3 and SDS occurs at concentrations below the critical micelle concentration (cmc) of the pure surfactants; the formation of these mixed aggregates was also monitored by light scattering, which indicates that the addition of TbCl3 to surfactant concentration at values below the pure surfactant cmc results in a much greater light scattering than that found with pure sodium alkylsulfate surfactant micelles. This phenomenon is dependent upon the alkyl chain length of the surfactant. With Tb(III)/DS-, complexes are formed with a cation/anion binding ratio varying from 3 to 6, which depends upon the initial concentration of Tb(III). This suggests that the majority of the cation hydration water molecules can be exchanged by the anionic surfactant. When the carbon chain length decreases, interactions between surfactant and Tb(III) also decrease, alterations in conductivity and fluorescence data are not so significant and, consequently, no binding ratio can be detected even if existing. The surfactant micellization is dependent on the presence of electrolyte in solution with apparent cmc being lower than the corresponding cmc value of pure SDS.