The electrooxidation of methanol and related compounds at ruthenium dioxide-coated electrodes

The underlying metal was observed to corrode when a ruthenium dioxide-coated titanium electrode was anodized in an aqueous methanol solution. With a similarly coated platinum electrode peaks were observed on the voltammogram below 1.0 V which were attributed to methanol oxidation on the underlying metal. This effect was more pronounced when the electrode was subjected during cycling to potentials close to 0 V. Rapid oxidation of methanol on RuO₂ was observed at potentials above 1.0 V, the rate at a given potential increasing in an approximately linear manner with increasing alcohol concentration. The rate of reaction also increased with increasing temperature and increasing surface roughness. Tafel slope values were rather high (>100 mV decade^?1) and a mechanism involving anodically generated species such as OH_ads was proposed to account for these results. The variation of activity with pH was similar to that reported earlier for oxygen evolution at these anodes and this was again explained in terms of partial deactivation of the surface due to a combination of proton loss and phosphate ion adsorption at intermediate pH values. The release of carbon dioxide from aqueous solutions of higher alcohols at 25°C confirmed the high oxidizing power of RuO₂ anodes.     

Transport of topical anesthetics in vitamin E loaded silicone hydrogel contact lenses

Transport of surface active anesthetic drugs through silicone hydrogel contact lenses containing nanosized vitamin E aggregates is explored for achieving extended anesthetics delivery. Commercial silicone hydrogel contact lenses release most ophthalmic drugs including local anesthetics for only a few hours, which is not adequate. Here we focus on creating dispersion of highly hydrophobic vitamin E aggregates in the lenses as barriers for drug diffusion for increasing the release durations. This approach has been shown previously to be successful in extending the release durations for some common hydrophilic ophthalmic drugs. The topical anesthetic drugs considered here (lidocaine, bupivacaine, and tetracaine) are hydrophilic at physiologic pH due to the charge, and so these cannot partition into the vitamin E barriers. However, these surface active drug molecules adsorb on the surface of the vitamin E barriers and diffuse along the surface, leading to only a small decrease in the effective diffusivity compared to non-surface-active hydrophilic drugs. The drug adsorption can be described by the Langmuir isotherm, and measurements of surface coverage of the drugs on the vitamin E provide an estimate of the available surface area of vitamin E, which can then be utilized to estimate the size of the aggregates. A diffusion controlled transport model that includes surface diffusion along the vitamin E aggregates and diffusion in the gel fit the transport data well. In conclusion, the vitamin E loaded silicone contact lens can provide continuous anesthetics release for about 1-7 days, depending on the method of drug loading in the lenses, and thus could be very useful for postoperative pain control after corneal surgery such as the photorefractive keratectomy (PRK) procedure for vision correction.     

The effect of thermal pretreatment on the electrochemical response for palladium in aqueous media

Previous work on the electrochemistry of palladium in aqueous acid solution demonstrated the existence of two multilayer hydrous oxide reduction peaks, one at ca. 0.24 V and another at ca. 0.55 V vs. RHE, plus the presence of a reversible active surface state transition at ca. 0.24 V. In the present work with thermally activated palladium it was observed that, in agreement with the hydrous oxide reduction behaviour of the system, there is a second active state transition at E≥ca. 0.45 V. In most of its reactions in aqueous acid solution, apart from its unusual capacity to absorb hydrogen, palladium exhibits properties very similar to those of platinum; however, palladium seems to be more prone to dissolution and subsurface oxygen formation. Also the premonolayer oxidation responses of these two metals are often different as the more active state of the palladium surface is not as readily generated as that of platinum. The electrocatalytic properties of palladium, as reported earlier, correlate quite well with the hydrous oxide and premonolayer oxidation behaviour of this electrode system. Electronic Publication     

A versatile microfabricated platform for electrophoresis of double- and single-stranded DNA

We demonstrate a versatile microfabricated electrophoresis platform, incorporating arrays of integrated on-chip electrodes, heaters, and temperature sensors. This design allows a range of different sieving gels to be used within the same device to perform separations involving both single- and double-stranded DNA over distances on the order of 1 cm. We use this device to compare linear and cross-linked polyacrylamide, agarose, and thermo-reversible Pluronic-F127 gels on the basis of gel casting ease, reusability, and overall separation performance using a 100 base pair double-stranded DNA ladder as a standard sample. While cross-linked polyacrylamide matrices provide consistently high-quality separations in our system over a wide range of DNA fragment sizes, Pluronic gels also offer compelling advantages in terms of the ability to remove and reload the gel. Agarose gels offer good separation performance, however, additional care must be exercised to ensure consistent gel properties as a consequence of the need for elevated gel loading temperatures. We also demonstrate the use of denaturing cross-linked polyacrylamide gels at concentrations up to 19% to separate single-stranded DNA fragments ranging in size from 18 to 400 bases in length. Primers differing by 4 bases at a read length of 30 bases can be separated with a resolution of 0.9-1.0 in under 20 min. This level of performance is sufficient to conduct a variety of genotyping assays including the rapid detection of single nucleotide polymorphisms (SNPs) in a microfabricated platform. The ability to use a single microelectrophoresis system to satisfy a wide range of separation applications offers molecular biologists an unprecedented level of flexibility in a portable and inexpensive format.     

(Z)-3-p-tolylsulfinylacrylonitrile as a chiral dienophile: diels-alder reactions with furan and acyclic dienes

The behavior of (Z)-3-p-tolylsulfinylacrylonitrile (1) as a chiral dienophile has been evaluated from its reactions with furan and acyclic dienes. Electrostatic interactions of the cyano group with the sulfinyl one restrict the conformational mobility around the C-S bond, thus controlling the pi-facial selectivity, which is almost complete in all cases, the approach of the diene from the less-hindered face of the dienophile (that bearing the lone electron pair) in the predominant rotamer being the favored one. The regioselectivity is also completely controlled by the cyano group. Additionally, the reactivity of compound 1 as well as its endo-selectivity are both higher than those observed for the corresponding (Z)-3-sulfinylacrylates, thus proving the potential of sulfinylnitriles as chiral dienophiles.     

An investigation of the electrochemical responses of superactivated gold electrodes in alkaline solution

It is now well established that gold, in the form of oxide-supported microparticles or even as conventional macroelectrodes, displays inexplicably high catalytic activity for some reactions. In the present work, gold surfaces were superactivated by a combination of thermal and cathodic pretreatment and such electrodes in base yielded up to five distinct, and quite marked, premonolayer oxidation responses within the double layer region, over the range 0.0–1.0 V (RHE). As outlined in earlier publications, such unusual behaviour is important from an electrocatalytic (and heterogeneous catalysis) viewpoint. A new mode of active site adsorption, involving highly localized electron transfer from active surface atoms to either the external circuit (in electrocatalysis) or an adsorbing reactant (in heterogeneous catalysis), is proposed. Such localized (active site) adsorption, which is based on surface quantum confinement effects, is virtually independent of (or only indirectly related to) the electronic properties of the bulk metal.     

Acid Exfoliation of Imine‐linked Covalent Organic Frameworks Enables Solution Processing into Crystalline Thin Films

Covalent organic frameworks (COFs) are highly modular porous crystalline polymers that are of interest for applications such as charge‐storage devices, nanofiltration membranes, and optoelectronic devices. COFs are typically synthesized as microcrystalline powders, which limits their performance in these applications, and their limited solubility precludes large‐scale processing into more useful morphologies and devices. We report a general, scalable method to exfoliate two‐dimensional imine‐linked COF powders by temporarily protonating their linkages. The resulting suspensions were cast into continuous crystalline COF films up to 10 cm in diameter, with thicknesses ranging from 50 nm to 20 μm depending on the suspension composition, concentration, and casting protocol. Furthermore, we demonstrate that the film fabrication process proceeds through a partial depolymerization/repolymerization mechanism, providing mechanically robust films that can be easily separated from their substrates.     

Chemically Programmable and Switchable CAR-T Therapy

Although macromolecules on cell surfaces are predominantly targeted and drugged with antibodies, they harbor pockets that are only accessible to small molecules and constitutes a rich subset of binding sites with immense potential diagnostic and therapeutic utility. Compared to antibodies, however, small molecules are disadvantaged by a less confined biodistribution, shorter circulatory half-life, and inability to communicate with the immune system. Presented herein is a method that endows small molecules with the ability to recruit and activate chimeric antigen receptor T cells (CAR-Ts). It is based on a CAR-T platform that uses a chemically programmed antibody fragment (cp-Fab) as on/off switch. In proof-of-concept studies, this cp-Fab/CAR-T system targeting folate binding proteins on the cell surface mediated potent and specific eradication of folate-receptor-expressing cancer cells in vitro and in vivo.     

Bismuth(III) Flavonolates: The Impact of Structural Diversity on Antibacterial Activity,Mammalian Cell Viability and Cellular Uptake

A series of homoleptic and heteroleptic bismuth(III) flavonolate complexes derived from six flavonols of varying substitution have been synthesised and structurally characterised. The complexes were evaluated for antibacterial activity towards several problematic Gram-positive (Staphylococcus aureus, methicillin-resistant Staphylococcus aureus (MRSA), and vancomycin-resistant Enterococcus (VRE)) and Gram-negative (Escherichia coli, Pseudomonas aeruginosa) bacteria. The cell viability of COS-7 (monkey kidney) cells treated with the bismuth flavonolates was also studied to determine the effect of the complexes on mammalian cells. The heteroleptic complexes [BiPh(L)₂] (in which L=flavonolate) showed good antibacterial activity towards all of the bacteria but reduced COS-7 cell viability in a concentration-dependent manner. The homoleptic complexes [Bi(L)₃] exhibited activity towards the Gram-positive bacteria and showed low toxicity towards the mammalian cell line. Bismuth uptake studies in VRE and COS-7 cells treated with the bismuth flavonolate complexes indicated that Bi accumulation is influenced by both the substitution of the flavonolate ligands and the degree of substitution at the bismuth centre.