Highly Amino Acid Selective Hydrolysis of Myoglobin at Aspartate Residues as Promoted by Zirconium(IV)‐Substituted Polyoxometalates

SDS‐PAGE/Edman degradation and HPLC MS/MS showed that zirconium(IV)‐substituted Lindqvist‐, Keggin‐, and Wells–Dawson‐type polyoxometalates (POMs) selectively hydrolyze the protein myoglobin at Asp? X peptide bonds under mildly acidic and neutral conditions. This transformation is the first example of highly sequence selective protein hydrolysis by POMs, a novel class of protein‐hydrolyzing agents. The selectivity is directed by Asp residues located on the surface of the protein and is further assisted by electrostatic interactions between the negatively charged POMs and positively charged surface patches in the vicinity of the cleavage site.     

Detection of dopamine in the pharmacy with a carbon nanotube paste electrode using voltammetry

A simply prepared DNA immobilized on a carbon nanotube paste electrode (CNTPE) was utilized to monitor dopamine ion concentration using the cyclic voltammetry (CV) and square-wave (SW) stripping voltammetry methods. The optimum analytical conditions were sought. The result obtained was a very low detection limit compared to other common voltammetry methods. The optimal parameters were found to be as follows: 3.5 pH, 0.48 V SW amplitude, 71 Hz frequency, 5 s accumulation time, 0.01 V increment potential, and -1.3 V (anodic-*-) and 1.2 V (cathodic-o-) accumulation potentials. Given these conditions, the linear working range was observed to be within 0.01-0.11 microg L(-1) (SW anodic and CV). The analytical detection limit was determined to be SW anodic and CV: 4.0 microg L(-1) (2.1 x 10(-11) mol L(-1)) dopamin, and the relative standard deviation at the dopamine concentration of SW anodic 0.05 microg L(-1) was 0.02% (n=15) at the optimum conditions.     

Hydrosilylation Induced by N→Si Intramolecular Coordination: Spontaneous Transformation of Organosilanes into 1‐Aza‐Silole‐Type Molecules in the Absence of a Catalyst

Our attempts to synthesize the N→Si intramolecularly coordinated organosilanes Ph₂L¹SiH ( 1 a ), PhL¹SiH₂ ( 2 a ), Ph₂L²SiH ( 3 a ), and PhL²SiH₂ ( 4 a ) containing a CH?N imine group (in which L¹ is the C,N‐chelating ligand {2‐[CH?N(C₆H₃‐2,6‐iPr₂)]C₆H₄}^? and L² is {2‐[CH?N(tBu)]C₆H₄}^?) yielded 1‐[2,6‐bis(diisopropyl)phenyl]‐2,2‐diphenyl‐1‐aza‐silole ( 1 ), 1‐[2,6‐bis(diisopropyl)phenyl]‐2‐phenyl‐2‐hydrido‐1‐aza‐silole ( 2 ), 1‐tert‐butyl‐2,2‐diphenyl‐1‐aza‐silole ( 3 ), and 1‐tert‐butyl‐2‐phenyl‐2‐hydrido‐1‐aza‐silole ( 4 ), respectively. Isolated organosilicon amides 1 – 4 are an outcome of the spontaneous hydrosilylation of the CH?N imine moiety induced by N→Si intramolecular coordination. Compounds 1–4 were characterized by NMR spectroscopy and X‐ray diffraction analysis. The geometries of organosilanes 1 a – 4 a and their corresponding hydrosilylated products 1 – 4 were optimized and fully characterized at the B3LYP/6‐31++G(d,p) level of theory. The molecular structure determination of 1 – 3 suggested the presence of a Si?N double bond. Natural bond orbital (NBO) analysis, however, shows a very strong donor–acceptor interaction between the lone pair of the nitrogen atom and the formal empty p orbital on the silicon and therefore, the calculations show that the Si?N bond is highly polarized pointing to a predominantly zwitterionic Si⁺N^? bond in 1 – 4 . Since compounds 1 – 4 are hydrosilylated products of 1 a – 4 a , the free energies (ΔG₂₉₈), enthalpies (ΔH₂₉₈), and entropies (ΔH₂₉₈) were computed for the hydrosilylation reaction of 1 a – 4 a with both B3LYP and B3LYP‐D methods. On the basis of the very negative ΔG₂₉₈ values, the hydrosilylation reaction is highly exergonic and compounds 1 a – 4 a are spontaneously transformed into 1 – 4 in the absence of a catalyst.     

Determination of Caffeine Using a Simple Graphite Pencil Electrode with Square-Wave Anodic Stripping Voltammetry

A simple commercial graphite pencil electrode (GPE) was utilized for monitoring caffeine using the square-wave anodic stripping voltammetry (SWASV) method. This method was applied to determine the caffeine levels in several tea samples, which yielded a relative error of 1% in the concentrations. Caffeine was deposited at 0.0V (vs. Ag/AgCl), then reduced at +1.40V to strip it on the GPE. Optimal experimental conditions for the analysis were found to be as follows: pH value of 9 for the medium; deposition potential of 0.0V; deposition time of 120s; SW frequency of 25Hz; SW amplitude of 45mV, and step potential of 6mV. Given these optimum conditions, a linear range was observed within the concentration of 0500mgL^–1. At caffeine concentrations of 50.0, 250.0, and 500.0mgL^–1, the relative standard deviations in measured concentrations (n=12) were 0.19, 0.09, and 0.11%, respectively. The detection limit was found to be 9.2mgL^–1, which is comparable with the result obtained using a carbon paste electrode, equivalent to 8.2mgL^–1.     

Repair of guanyl radicals in plasmid DNA by electron transfer is coupled to proton transfer

By using gamma-irradiation in the presence of thiocyanate ions, we have generated guanyl radicals in plasmid DNA. These can be detected by using an Escherichia coli base excision repair endonuclease to convert their stable end products to strand breaks. The yield of enzyme-sensitive sites is strongly attenuated by the presence of micromolar concentrations of one of a series of singly substituted phenols, and it is possible to derive bimolecular rate constants for the reduction of DNA guanyl radicals by these phenols. More strongly reducing phenols were found to react more rapidly. This electron-transfer reaction also involves a proton transfer. By comparing the expected energetics of the reaction with the observed rate constants, the electron transfer is found to be mechanistically coupled with the proton transfer.     

Diagnosis of copper ions in vascular tracts using a fluorine-doped carbon nanotube sensor

The voltammetric assay of Cu(II) was investigated using a carbon nanotube electrode (CNE) and fluorine immobilized onto a carbon nanotube electrode (FCNE) in cyclic voltammetry (CV), square-wave (SW) stripping voltammetry, and chronoamperometry. Optimum SW conditions were attained at working ranges of 0.01–0.11 ng L⁻¹ Cu(II) (11 points), and a relative standard deviation of 1.68% (RSD, n = 15) was observed at 10.0 μg L⁻¹ Cu(II). Within a 200 s accumulation time, detection limit of 0.006 μg L⁻¹ was attained. The life span of each electrode was more than 1 month. The sensor was applied to tap water, blood, and rat tail vascular (in vivo). It was found that the sensor could be used with an interface system in the assay of live cells and non-treated blood.     

Some imines and azo compounds containing furoxan ring synthesized from methylisoeugenol

Some imines and azo compounds containing furoxan and benzene rings have been prepared starting from methylisoeugenol. The structure of reported compounds has been confirmed by elemental analysis, ms, uv, ir, and nmr spectroscopy. It is shown that, on treatment with Na₂S₂O₄, the nitro group on the benzene ring was reduced to an amino group, but the N←O group of furoxan ring was not. The ¹H‐ and ¹³C nmr signals are assigned based on their spin‐spin splitting patterns, in some cases, NOESY and HMBC spectra are used. The NOESY spectra indicate that the reported imines have E‐configuration. Among 8 tested compounds, there are 5 compounds that exhibit anti‐microbial activity toward Gr+ S. aureus at concentration 12.5μg/mL.     

Anodic square-wave stripping voltammetric analysis of epinephrine using carbon fiber microelectrode

The behavior of epinephrine on a carbon fiber microelectrode (CFME) was studied with cyclic voltammetry and square-wave (SW) stripping voltammetry in order to find optimum conditions for its analysis using the CFME. An anodic stripping peak at about 0.20 V (vs. Ag/AgCl) was utilized. Under optimum conditions for anodic stripping (a pH value of 7.4, a deposition potential of − 0.5 V, a deposition time of 90 s, a final potential of 0.8 V, a SW frequency of 20 Hz, a step potential of 5 mV, and an amplitude of 45 mV), the calibration was linear in the concentration range of 0.0∼0.4 mg/L, and the detection limit was found to be 0.009 mg/L with a relative standard deviation 0.18% (n = 12) at 0.2 mg/L. The analytical performance of the CMFE, which is unmodified, is comparable to or better than other voltammetric results with various modified electrodes.     

Assay of diazinon pesticides in cucumber juice and in the deep brain cells of a live carp

An electrochemical assay for diazinon pesticides was developed using cyclic voltammetry and square-wave anodic and cathodic stripping voltammetry. The method has a linear working range from 6 to 62 ng L^?1. The detection limit is 0.5 ng L^?1 (1.64 pM), and the relative standard deviation at a diazinon concentration of 6.0 mg L^?1 was 0.06% (n?=?15) in an 0.1 M ammonium phosphate electrolyte solution. The results of the application of the sensor were compared with those of other common spectrometric and electrochemical methods. The method was also applied to cucumber juice and the deep brain cells of a live carp in real conditions.