Evaluation of carbonic anhydrase and paraoxonase inhibition activities and molecular docking studies of highly water-soluble sulfonated phthalocyanines

The investigation of carbonic anhydrase and paraoxonase enzyme inhibition properties of water-soluble zinc and gallium phthalocyanine complexes ( 1 and 2 ) are reported for the first time. The binding of p-sulfonylphenoxy moieties to the phthalocyanine structure favors excellent solubilities in water, as well as providing an inhibition effect on carbonic anhydrase (CA) I and II isoenzymes and paraoxonase (PON1) enzyme. According to biological activity results, both complexes inhibited hCA I, hCA II, and PON1. Whereas 1 and 2 showed moderate hCA I and hCA II (off-target cytosolic isoforms) inhibitory activity (Ki values of 26.09 µM and 43.11 µM for hCA I and 30.95 µM and 33.19 µM for hCA II, respectively), they exhibited strong PON1 (associated with high-density lipoprotein [HDL]) inhibitory activity (Ki values of 0.37 µM and 0.27 µM, respectively). The inhibition kinetics were analyzed by Lineweaver–Burk double reciprocal plots. It revealed that 1 and 2 were noncompetitive inhibitors against PON1, hCA I, and hCA II. These complexes can be more advantageous than other synthetic CA and PON inhibitors due to their water solubility. Docking studies were carried out to examine the interactions between hCA I, hCA II, and PON1 inhibitors and metal complexes at a molecular level and to predict binding energies.     

Differential non-destructive image current detection in a fourier transform quadrupole ion trap

Dual-detector differential non-destructive Fourier transform detection in a quadrupole ion trap is shown to improve signal intensity and reduce noise compared with spectra recorded using a single detector. A larger area detector in each end-cap electrode is machined to fit its hyperbolic shape and so minimize field imperfections on the z-axis. Argon, acetophenone and bromobenzene spectra were recorded to allow a comparison between single- and dual-detector (differential) modes of detection and to demonstrate the improvement achieved with differential detection. Copyright 1999 John Wiley & Sons, Ltd.     

基于拉曼光谱的储层沥青热演化特征及其判别

为了明确储层沥青热演化程度与激光拉曼光谱的关系,利用拉曼光谱无损分析和流体包裹体方法,对黔西南白层地区储层沥青拉曼光谱进行了定量化描述,首先获取了储层沥青其伴生流体包裹体均一温度,然后获得了储层沥青拉曼光谱图,并对比标准沥青成熟度分布图,确定了储层沥青热演化程度及其特征.结果表明:黔西南白层地区存在晚三叠世(230 M...     

Determination of Methanol Increment in Mobile Phase Consisting of Methanol and Water by On—line UV Spectrometry in Reversed Phase Liquid Chromatography

ＩｎｔｒｏｄｕｃｔｉｏｎＦｒｏｎｔａｌｃｈｒｏｍａｔｏｇｒａｐｈｙ (ＦＣ) ,ａｎｏｌｄｂｒａｎｃｈｉｎｌｉｑｕｉｄｃｈｒｏｍａｔｏｇｒａｐｈｙ (ＬＣ) ,1ｈａｓｂｅｅｎｓｕｃｃｅｓｓｆｕｌｌｙｅｍ ｐｌｏｙｅｄｉｎｔｈｅｓｏｌｕｔｉｏｎｏｆｍａｎｙｔｈｅｏｒｅｔｉｃａｌａｓｗｅｌｌａｓａｐ ｐｌｉｅｄｐｒｏｂｌｅｍｓ—ｓｕｃｈａｓｍｅａｓｕｒｉｎｇｂｉｎｄｉｎｇｃｏｎｓｔａｎｔｂｅ ｔｗｅｅｎｃｏｍｐｏｎｅｎｔｓ2 ａｎｄｋｉｎｅｔｉｃｐａｒａｍｅｔｅｒｓｏｆｃｈｅｍｉｃａｌｒｅａｃｔｉｏｎｓ ,3 ａｄｓ…     

Analysis of some large-scale nonlinear stochastic dynamic systems with subspace-EPC method

The probabilistic solutions to some nonlinear stochastic dynamic (NSD) systems with various polynomial types of nonlinearities in displacements are analyzed with the subspace-exponential polynomial closure (subspace-EPC) method. The space of the state variables of the large-scale nonlinear stochastic dynamic system excited by Gaussian white noises is separated into two subspaces. Both sides of the Fokker-Planck-Kolmogorov (FPK) equation corresponding to the NSD system are then integrated over one of the sub...     

Mass transfer in amperometric gas sensors

The mass transfer in amperometric gas sensors intended for atmosphere monitoring is studied theoretically and experimentally. External and internal constituents of the diffusion resistance (DR) of the sensors are determined. The external constituent is defined by conditions of convective diffusion of air under analysis relative to the sensor. The internal constituents are defined by parameters of construction of sensor elements, and electrolyte film, as well as the structure of the indicator electrode, and solubility of the gas under analysis in the electrolyte. Testing a chlorine sensor shows that the DR of the internal constituents is independent of the conditions of convective diffusion of the environment under analysis near the sensor. The similarity criterion of sensors of different types is shown to be the relative share of DRs of individual constituents in the overall DR of the sensor. The results obtained can be used for the development and design of sensors with required range and resolution.     

Bis benzothiophene Schiff bases: synthesis and in silico-guided biological activity studies

Since benzo [ b ] thiophene scaffold is one of the privileged structures in drug discovery as this core exhibitsactivities for different biological problems, in this study bis (benzo[ b ]thiophene-2-yl) alkyl methanimine derivatives (1-9) were synthesized by reacting benzo[ b ]thiophene-2-carbaldehyde with diamines. All newly compounds were characterized by IR, ¹H NMR and ¹³C NMR spectroscopic methods. Synthesized compounds were investigated using binary QSARbased models on therapeutic activity prediction of synthesized compounds and they showed high predicted activities in following diseases: bacterial, angina, allergy, depression and obesity. Thus, they were then tested for their antimicrobial and antileishmanial activities as a result of this theoretical study. Compound 1(N, N’- (propane-1,3-diyl) bis (1-(benzo [ b ] thiophene-2-yl)) methanimine) was found the most active compound in both diseases. Thus, its molecular docking studies were also carried out.     

Highly luminescent water-dispersed silicon quantum dots for fluorometric determination of oxytetracycline in milk samples

A fluorescent probe based on silicon quantum dots (SiQDs) was developed for the selective and sensitive detection of oxytetracycline (OTC) via the inner filter effect (IFE). The water-soluble fluorescent SiQD was synthesized based on the reaction of 3-Aminopropyltriethoxysilane (APTES) and sodium citrate as precursors by the one-pot hydrothermal process. The strong fluorescence emission of quantum dots (QDs) was obtained at 440 nm when excited at 350 nm and OTC had a broad absorption band between 200 and 400 nm. The excitation spectrum of SiQDs was completely overlapped with the absorption spectrum of OTC. The light at an excitation wavelength of QDs absorbed by OTC caused a decrease in fluorescence intensity with an increase in the concentration of OTC. Under optimal conditions, the linear concentration range was 0.92–9.2 µg mL1 with a detection limit (LOD; S/N = 3) of 0.19 µg mL ^-1 . The proposed method was applied to the determination of OTC in milk samples and satisfactory recoveries (98.8–100.5%) with low RSD % values (0.93–2.31%) were achieved. This simple, selective, sensitive, rapid, and cheap method can be used as a promising tool for OTC analysis in food safety.     

Thermal conductivities of solid and liquid phases for pure Al,pure Sn and their binary alloys

The variations of thermal conductivities of solid phases versus temperature for pure Sn, pure Al and Sn–0.5 wt.% Al, Sn–2.2 wt.% Al, Sn–25 wt.% Al, Sn–50 wt.% Al, Sn–75 wt.% Al binary alloys were measured with a radial heat flow apparatus. From thermal conductivity variations versus temperature, the thermal conductivities of the solid phases at their melting temperature and temperature coefficients for same materials were also found to be 60.60 ± 0.06, 208.80 ± 0.22, 69.70 ± 0.07, 80.30 ± 0.08, 112.30 ± 0.12, 142.00 ± 0.15, 188.50 ± 0.20 W/K m and 0.00098, 0.00062, 0.00127, 0.00114, 0.00112, 0.00150, 0.00116 K⁻¹, respectively. The thermal conductivity ratios of liquid phase to solid phase for the pure Sn, pure Al and eutectic Sn–0.5 wt.% Al alloy at their melting temperature are found to be 1.11, 1.13, 1.06 with a Bridgman type directional solidification apparatus, respectively. Thus the thermal conductivities of liquid phases for pure Sn, pure Al and eutectic Sn–0.5 wt.% Al binary alloy at their melting temperature were evaluated to be 67.26, 235.94 and 73.88 W/K m, respectively by using the values of solid phase thermal conductivities and the thermal conductivity ratios of liquid phase to solid phase.     

Remarkable bismuth-gold alloy decorated on MWCNT for glucose electrooxidation: the effect of bismuth promotion and optimization via response surface methodology

In this study, the carbon nanotube supported gold, bismuth, and gold-bismuth(Au/MWCNT, Bi/MWCNT, and Au-Bi/MWCNT) nanocatalysts were prepared with NaBH₄ reduction method at varying molar atomic ratio for glucose electrooxidation (GAEO). The synthesized nanocatalysts at different Au: Bi atomic ratios are characterized via x - ray diffraction (XRD), transmission electron microscopy (TEM), and N₂ adsorption-desorption. For the performance of AuBi/MWCNT for GAEO, electrochemical measurements are performed by using different electrochemical techniques namely cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS). Monometallic Au/MWCNT exhibits higher activity than Bi/MWCNT with 256.57 mA/mg (0.936 mA/cm²) current density. According to CV results, Au₈₀Bi₂₀/MWCNT nanocatalyst has the highest GAEO activity with the mass activity of 320.15 mA/mg (1.133 mA/cm²). For Au₈₀Bi₂₀/MWCNT, central composite design (CCD) is utilized for optimum conditions of the electrode preparation. Au₈₀Bi₂₀/MWCNT nanocatalysts are promising anode nanocatalysts for direct glucose fuel cells (DGFCs).