Two new standard reference materials for the determination of drugs of abuse in human hair

Two new standard reference materials (SRM) for drugs of abuse in human hair have been developed. SRM 2379 consists of hair spiked with cocaine, benzoylecgonine, cocaethylene, phencyclidine, amphetamine, and methamphetamine. SRM 2380 consists of hair spiked with codeine, morphine, monoacetylmorphine, and tetrahydrocannabinol (THC). The SRMs were prepared by soaking the hair in a solution of the target analytes in water-dimethylsulfoxide. The concentration of each analyte was determined using two methods, one based upon gas chromatography/mass spectrometry (GC/MS) and one based upon liquid chromatography/mass spectrometry (LC/MS). Both methods used 0.1 M HCl for extraction of all the analytes from the hair, except for THC, which was extracted with 1 M NaOH. For isolation of the analytes from the extracts, the GC/MS-based methods used different clean-up procedures from those used for the LC/MS-based methods. The results from the two methods were in good agreement with mean differences for the analytes ranging from 4% to 16%. These materials will enable laboratories performing analyses of hair for drugs of abuse to test the accuracy of their methods.     

Dysfunction of Shh signaling activates autophagy to inhibit trophoblast motility in recurrent miscarriage

In early pregnancy, the placenta anchors the conceptus and supports embryonic development and survival. This study aimed to investigate the underlying functions of Shh signaling in recurrent miscarriage (RM), a serious disorder of pregnancy. In the present study, Shh and Gli2 were mainly observed in cytotrophoblasts (CTBs), Ptch was mainly observed in syncytiotrophoblasts (STBs), and Smo and Gli3 were expressed in both CTBs and STBs. Shh signaling was significantly impaired in human placenta tissue from recurrent miscarriage patients compared to that of gestational age-matched normal controls. VEGF-A and CD31 protein levels were also significantly decreased in recurrent miscarriage patients. Furthermore, inhibition of Shh signaling impaired the motility of JAR cells by regulating the expression of Gli2 and Gli3. Intriguingly, inhibition of Shh signaling also triggered autophagy and autolysosome accumulation. Additionally, knockdown of BECN1 reversed Gant61-induced motility inhibition. In conclusion, our results showed that dysfunction of Shh signaling activated autophagy to inhibit trophoblast motility, which suggests the Shh pathway and autophagy as potential targets for RM therapy.Subject terms: Embryology, Endocrine reproductive disorders, Autophagosomes     

Fabrication and evaluation of bacterial cellulose-polyaniline composites by interfacial polymerization

The fabrication and evaluation of nanocomposites based on microbial cellulose and polyaniline (PANi) are described. Microbial cellulose, so called, bacterial cellulose (BC) was introduced to interfacial polymerization of aniline. Two different phases based on water and chloroform made it easy for nanosized PANi particles to be synthesized on BC. Without any help of a surfactant or templates, BC played a critical role of supporting the growth of PANi. As a function of aniline concentration, the corresponding PANi content and volume resistivity were checked. From morphological images observed by FE-SEM, PANi nanoparticles were densely arrayed along every fiber of BC. The conjugated backbone of PANi was thought to contribute to the improvements of thermal stability of PANi/BC composites. The stiffness and brittleness of PANi were compensated by more ductile BC, suggesting BC can be a promising substrate for it. By the simple and facile interfacial polymerization, the electrical conductivity of PANi/BC composites reached up to 3.8?×?10^?1?S/cm when 0.32?M of aniline was used. This PANi/BC nanocomposite can be useful in applications requiring biocompatibility and electrical conductivity such as biological and chemical sensors.     

Synthesis and Application of Epoxidized Natural Rubber

Abstract

North Vietnamese NR latexes were successfully epoxidized using peracetic acid at moderate temperature and pH range. The epoxide contents of pure epoxidized natural rubber (ENR) are from 5 to 70 mol%. The ENR products were characterized and determined by spectral and thermal analysis besides the chemical titration. Conditions of longlasting or excessive temperature, or high acidic pH led to side ring opened products, proved easily by IR, ¹H-NMR, and DSC analysis. The ENR were vulcanized using a semiefficient system. The epoxidation increased the adhesion between rubber and tire cord and metal. This effect becomes stronger beyond 25 mol% and tends to be limited at over 60 mol%. The ENRs were used to formulate special-purpose adhesives. The shear strength of the adhesive ranges from 32 to 45 kg/cm² for bonding rubber to nylon and rubber to metal, respectively.     

New Methods for β-Lactam Formation from β-Amino Acids Using (C6H5)3P/CC14 and (C6H5)3P/NBS

Triphenylphosphine/carbon tetrachloride and triphenyl-phosphine/N-bromosuccinimide were found to be very effective for β-lactam formation from β-amino acids in acetonitrile.     

Development of new high‐performance visible light photoinitiators based on carbazole scaffold and their applications in 3d printing and photocomposite synthesis

In this article, new compounds based on the carbazole scaffold (DMs = DM1 and DM2, constituted by a carbazole unit connected on positions 3 and 6 to a two 4,4′‐dimethoxydiphenylamine groups and differing by the substituent present on the nitrogen heteroatom of the carbazole core) were synthesized and proposed as high‐performance visible light photoinitiators/photosensitizers for both the free‐radical polymerization of methacrylates and the cationic polymerization of epoxides upon visible light exposure using LED@405 nm. Remarkably, DM2 leads to higher final conversions than DM1. In order to study the photophysical and photochemical properties of the carbazole derivatives, different parameters were taken into account such as the light absorption, the steady‐state photolysis, and the fluorescence spectroscopy. Using different techniques such as fluorescence quenching, redox behavior, and cyclic voltammetry, we are able to discuss the photosensitization/photoinitiation reactions providing a full coherent picture of the involved chemical mechanisms. The photosensitization of the carbazole derivatives occurred predominantly via singlet excited states at the rate of the diffusion limit. Upon exposure to laser diode at 405 nm, DMs show high performance in initiating systems for 3D resins. Remarkably, DM2 can also be used in photocomposite synthesis using light‐emitting diode conveyor. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2081–2092     

Copper-catalyzed aerobic oxidative dehydrogenation for conversion of 2-(alkylthio)-1,4-dihydropyrimidines to 2-(alkylthio)pyrimidines

A simple and efficient aerobic oxidative dehydrogenation reaction method for the conversion of 2-(alkylthio)-1,4-dihydropyrimidines to 2-(alkylthio)pyrimidines using copper catalyst with no additives, such as an oxidant, acid, or base, has been developed. The reaction was successful with a wide range of 2-(alkylthio)-1,4-dihydropyrimidine substrates.     

A pure reentrant cholesteric phase

Abstract

An optically active derivative of p-cyanobiphenyl exhibits a stable reentrant cholesteric phase with the seuqnce: K N?S_A N?I.