Characteristics of xenon flash lamps in short-flash operation

Journal of Applied Spectroscopy -     

An analysis of seismic attenuation in random porous media

The attenuation of seismic wave in rocks has been one of the interesting research topics, but till now no poroelasticity models can thoroughly explain the strong attenuation of wave in rocks. In this paper, a random porous medium model is designed to study the law of wave propagation in complex rocks based on the theory of Biot poroelasticity and the general theory of stochastic process. This model sets the density of grain, porosity, permeability and modulus of frame as random parameters in space, and only one fluid infiltrates in rocks for the sake of better simulation effect in line with real rocks in earth strata. Numerical simulations are implemented. Two different inverse quality factors of fast P-wave are obtained by different methods to assess attenuation through records of virtual detectors in wave field (One is amplitude decay method in time domain and the other is spectral ratio method in frequency domain). Comparing the attenuation results of random porous medium with those of homogeneous porous medium, we conclude that the attenuation of seismic wave of homogeneous porous medium is far weaker than that of random porous medium. In random porous media, the higher heterogeneous level is, the stronger the attenuation becomes, and when heterogeneity σ = 0.15 in simulation, the attenuation result is consistent with that by actual observation. Since the central frequency (50 Hz) of source in numerical simulation is in earthquake band, the numerical results prove that heterogeneous porous structure is one of the important factors causing strong attenuation in real stratum at intermediate and low frequency.     

交通产业链上企业工程项目成本控制的影响因素研究

一些企业以轨道交通产业为纽带形成了交通产业链,轨道交通产业链上的企业要注重对相关工程项目实施全过程中的成本控制.从产业链的视角出发,围绕财务指标、内部业务流程指标、客户指标、学习与成长能力指标这4个方面,构建了评价指标体系和成本控制指标体系.运用层次分析法和模糊综合评价法进行评价和分析,找出了影响轨道交通产业链上企业工程项目成本控制的主要因素.研究表明,有55%的人认为财务指标、内部业务流程指标、客户指标、学习与成长能力指标这4个因素对轨道交通工程项目成本控制的影响较大.     

A study on the real-time radiation dosimetry measurement system based on optically stimulated luminescence

The optically stimulated luminescent (OSL) radiation dosimeter technically surveys a wide dynamic measurement range and a high sensitivity. Optical fiber dosimeters provide capability for remote monitoring of the radiation in the locations which are difficult-to-access and hazardous. In addition, optical fiber dosimeters are immune to electrical and radio-frequency interference. In this paper, a novel remote optical fiber radiation dosimeter is described. The optical fiber dosimeter takes advantage of the charge trapping materials CaS:Ce, Sm that exhibit OSL. The measuring range of the dosimeter is from 0.1 to 100 Gy.     

Statistical Fluctuation of Linear-System Driven by Colored Noise

The Brownian motion driven by colored noise in the harmonic oscillator potential is studied, and the "best Fokker-Planck equationn" is proposed. The analytical formulse of the second moments of coordinate and velocity are obtained. The fluctuation behavior of a system under influence of the correlation time of colored noise is discussed.     

高压X光机发射谱的测量与研究

本文描述了测量高压Ｘ光机发射谱的技术,并成功地测量了１４０ｋＶ高压Ｘ光机的发射谱。研究了滤波片对Ｘ光机发射谱特性的影响,在此基础上提出了可根据不同的测试目的和条件,用不同的滤波片可形成高强度的准单能,双能等Ｘ光激发源及其可能的应用领域。     

ConFlo III - an interface for high precision delta(13)C and delta(15)N analysis with an extended dynamic range

A newly developed interface coupling a CHN combustion device (elemental analyser 'EA') to an isotope ratio mass spectrometer is described and evaluated. The purpose of the device is to extend the dynamic range of delta(13)C and delta(15)N analysis from less than 2 orders of magnitude to more than 3 orders of magnitude. Carbon isotope ratio measurements of atropine as a model compound have been performed analysing between 1 μg to 5 mg C with acceptable to excellent precision (0.6 to 0.06 per thousand, delta-notation). The correction due to the blank signal is critical for sample amounts smaller than 4 μg C. The maximum sample weight is determined by the combustion capacity of the EA. Larger sample amounts are measured using dilution of a small part of the EA effluent with helium. The dilution mechanism works virtually free of isotope fractionation. Copyright 1999 John Wiley & Sons, Ltd.     

红外吸收光谱、核磁共振谱和质谱确证比卡鲁胺的结构

测试样品和国外比卡鲁胺对照品的红外吸收光谱、核磁共振谱、质谱。对比结果表明 ,研制的比卡鲁胺的化学结构与从国外片剂中提取的比卡鲁胺的结构式完全一致     

热敏显色微胶囊的制备与表征

热敏显色微胶囊是用于传真、条形码系统、医用图像、各种打印等领域的重要材料,它是一种内部含有染料隐色体的球形胶囊。染料隐色体是一种内酯结构的无色染料,在一定条件下,与显色剂发生显色反应。由于染料隐色体的化学惰性不够理想,易受外界因素的干扰,因而在应用中受到一定限制,所以为了克服其存在的不足,常将其微胶囊化。微胶囊的芯壁结构可以将芯材与外界隔离,提高芯材的稳定性,同时保留芯材原有的化学性质。当环境温度在微胶囊的玻璃化温度以上时,由于形成微胶囊壁的物质透过性显著增加,因此显色成分接触而发生显色反应。本文利用界面聚合法,以聚乙烯醇为保护胶体,曲拉通X-100为表面活性剂,聚氨酯为壁材,染料隐色体为芯材,合成了聚氨酯热敏显色微胶囊。研究了三个主要因素对微胶囊的粒径及其分布、表面形貌和热敏显色性能的影响。结果表明,增大保护胶体浓度,提高乳化速度,增加乳化剂用量,微胶囊的平均粒径变小,粒径分布变窄,表面变得光滑而且致密,具有较高的热敏显色密度。利用红外光谱仪确认了微胶囊的结构,在最优条件下,所制备的微胶囊玻璃化温度为131 ℃,并具有良好的热稳定性。