Match statistics for sequence-based alleles in profiles from forensic PCR-mps kits

The first autosomal sequence-based allele (aka SNP-STR haplotype) frequency database for forensic massively parallel sequencing (MPS) has been published, thereby removing one of the remaining barriers to implementing MPS in casework. The database was developed using a specific set of flank trim sites. If different trim sites or different kits with different primers are used for casework, then SNP-STR haplotypes may be detected that do not have frequencies in the database. We describe a procedure to address calculation of match probabilities when casework samples are generated using an MPS kit with different trim sites than those present in the relevant population frequency database. The procedure provides a framework for comparison of any MPS kit or database combination while also accommodating comparison of MPS and CE profiles.     

Total Synthesis of a Partial Structure from Arabinogalactan and Its Application for Allergy Prevention

Arabinogalactan, a microheterogeneous polysaccharide occurring in plants, is known for its allergy-protective activity, which could potentially be used for preventive allergy treatment. New treatment options are highly desirable, especially in a preventive manner, due to the constant rise of atopic diseases worldwide. The structural origin of the allergy-protective activity of arabinogalactan is, however, still unclear and isolation of the polysaccharide is not feasible for pharmaceutical applications due to a variation of the activity of the natural product and contaminations with endotoxins. Therefore, a pentasaccharide partial structure was selected for total synthesis and subsequently coupled to a carrier protein to form a neoglycoconjugate. The allergy-protective activity of arabinogalactan could be reproduced with the partial structure in subsequent in vivo experiments. This is the first example of a successful simplification of arabinogalactan with a single partial structure while retaining its allergy-preventive potential.     

Terminal Ligand and Packing Effects on Slow Relaxation in an Isostructural Set of [Dy(H2dapp)X2]+ Single Molecule Magnets**

We report three structurally related single ion Dy compounds using the pentadentate ligand 2,6-bis((E)-1-(2-(pyridin-2-yl)-hydrazineylidene)ethyl)pyridine (H₂dapp) [Dy(H₂dapp)(NO₃)₂]NO₃ ( 1 ), [Dy(H₂dapp)(OAc)₂]Cl ( 2 ) and [Dy(H₂dapp)(NO₃)₂]Cl_0.92(NO₃)_0.08 ( 3 ). The (H₂dapp) occupies a helical twisted pentagonal equatorial arrangement with two anionic ligands in the axial positions. Further influence on the electronic and magnetic structure is provided by a closely associated counterion interacting with the central N−H group of the (H₂dapp). The slow relaxation of the magnetisation shows that the anionic acetates give the greatest slowing down of the magnetisation reversal. Further influence on the relaxation properties of compounds 1 and 2 is the presence of short nitrate-nitrate intermolecular ligand contact opening further lattice relaxation pathways.     

Light‐induced degradation of PECVD aluminium oxide passivated silicon solar cells

Light‐induced degradation (LID) has been identified to be a critical issue for solar cells processed on boron‐doped silicon substrates. Typically, Czochralski‐grown silicon (Cz‐Si) has been reported to suffer from stronger LID than block‐cast multicrystalline silicon (mc‐Si) due to higher oxygen concentrations. This work investigates LID under conditions practically relevant under module operation on different cell types. It is shown that aluminium oxide (AlOx) passivated mc‐Si solar cells degrade more than a reference aluminium back surface field mc‐Si cell and, remarkably, an AlOx passivated Cz‐Si solar cell. The defect which is activated by illumination is shown to be doubtful a sole bulk effect while the AlOx passivation might play a certain role. This work may contribute to a re‐evaluation of the suitability of boron‐doped Cz‐ and mc‐Si for solar cells with very high efficiencies. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Influence of the steel powder type and processing parameters on the debinding of PM compacts with gelatin binder

Binders present an important part of the powder metallurgy technology as they are vital to provide efficient powder agglomeration and/or lubrication during shaping. At the same time, they have to be easily removed from the compacts during initial stages of sintering without any harmful effect for the base material, as well as for the environment. Therefore, behavior of gelatin as a binder for stainless- and tool-steel gas-atomised powder compacts was studied by thermal analysis and electron microscopy. Thermal analysis showed that peak mass-loss occurred in the range between 340 and 370 °C, depending on the base powder and heating rate. Risk for base powder oxidation at temperatures below 425 °C was detected. Based on the obtained results, it is recommended to perform debinding at ~425 °C after applying a heating rate of around 7.5 °C min^?1. Only in this way efficient enough binder removal can be obtained concurrently to avoiding base powder oxidation.     

Supramolecular Water Oxidation with Ru–bda‐Based Catalysts

Extremely slow and extremely fast new water oxidation catalysts based on the Ru–bda (bda=2,2′‐bipyridine‐6,6′‐dicarboxylate) systems are reported with turnover frequencies in the range of 1 and 900 cycles s^?1, respectively. Detailed analyses of the main factors involved in the water oxidation reaction have been carried out and are based on a combination of reactivity tests, electrochemical experiments, and DFT calculations. These analyses give a convergent interpretation that generates a solid understanding of the main factors involved in the water oxidation reaction, which in turn allows the design of catalysts with very low energy barriers in all the steps involved in the water oxidation catalytic cycle. We show that for this type of system π‐stacking interactions are the key factors that influence reactivity and by adequately controlling them we can generate exceptionally fast water oxidation catalysts.     

MVF Sensor Enables Analysis of Nucleic Acids with Stable Secondary Structures

One major challenge in nucleic acids analysis by hybridization probes is a compromise between the probe's tight binding and sequence‐selective recognition of nucleic acid targets folded into stable secondary structures. We have been developing a four‐way junction (4WJ)‐based sensor that consists of a universal stem‐loop (USL) probe immobilized on an electrode surface and two adaptor strands (M and F). The sensor was shown to be highly selective towards single base mismatches at room temperature, able to detect multiple targets using the same USL probe, and have improved ability to detect folded nucleic acids. However, some nucleic acid targets, including natural RNA, are folded into very stable secondary and tertiary structures, which may represent a challenge even for the 4WJ sensors. This work describes a new sensor, named MVF since it uses three probe stands M, V and F, which further improves the performance of 4WJ sensors with folded targets. The MVF sensor interrogating a 16S rRNA NASBA amplicon with calculated folding energy of ?32.82 kcal/mol has demonstrated 2.5‐fold improvement in a signal‐to‐background ratio in comparison with a 4WJ sensor lacking strand V. The proposed design can be used as a general strategy in the analysis of folded nucleic acids including natural RNA.     

Determination of the gas chromatographic elution sequences of the (+)- and (−)-enantiomers of stable atropisomeric PCBs on Chirasil-dex

Pure enantiomers of chiral (atropisomeric) polychlorinated biphenyls (PCBs) obtained by high-performance liquid chromatography were used to establish the gas chromatographic elution sequences of the (+)- and (−)-enantiomers of six PCB atropisomers on Chirasil-Dex. The elution order was found to be (−/+) for PCBs 84, 132, 136, and 176 and (+/−) for PCBs 135 and 174. The retention characteristics of all 19 tri- and tetra-ortho atropisomeric PCBs were also investigated. Nine of the atropisomers could be separated using this chiral selector. PCBs 95, 132, and 149 were completely resovled and PCBs 84, 91, 135, 136, 174, and 176 were partially separated (R = 0.7–0.9). All of the separated congeners are 2,3,6-substituted in at least one ring, and conversely – none of the congeners that lacks 2,3,6-substitution could be separated. Thus, chiral recognition and enantiomer separation seems to be strongly governed by 2,3,6-substitution.