Synthesis of Acyclic γ-Amino Mono-or Bisphosphonates Via Pentacovalent Oxaphosphorane Chemistry

Abstract

Geminal bisphosphonic acids and their salu have long been known to he effective inhibitors of bone resorption and mineralization. which arc common symptoms of diseases such as osteoporosis and Paget's disease [I]. Utilizing penlacovalent nxaphosphoranc chemistry, a variety of acyclic γ-amino mono- and bisphosphonates can be efficiently hynthesizcd. Hydrolysis of the P(V) oxaphospholenes, I and 2. followed by reductive amination [2] of the multing ketones, kds directly to the γ-amino mono and bisphosphonateh 5 and 6. The reaction of secondary amincs with ketones 3 and 4 are slow and low yielding. In reactions with ketones containing a bisphosphonatc. The primary product is the cyclic bisphosphonates. 7. Reactions of primary amines with ketones containing a mono-phosphonate M generally hencr, giving higher yields of the desired prcduct in a rhoncr rcaciion time. Syntheses of compounds, 9–11 were also performed (R₁ ? H, R₂ ? pentyl, cyclohexyl, benzyl, phenyl) in good yields.     

Scanning tunneling microscopy with atomic resolution on ReS2 single crystals grown by vapor phase transport

Atomic resolution images of layered transition metal-dichalcogenide ReS₂ single-crystals (n-type semiconductor) were obtained using a scanning tunneling microscope with a positive tip. In most cases only unresolved clusters of four rhenium atoms could be seen. Occasional images with higher resolution showed that these bright structures consist of four separated atoms. The symmetry of the imaged atoms is identical to that of the rhenium sublattice but not to that of the sulfur atoms. We conclude therefore that the main contribution to the tunneling current is due to the rhenium atoms, although the sulfur atoms are placed by about 0.15 nm closer to the tip. Thus for our positive bias of the tip the tunneling electrons originate from occupied rhenium states in the valence band of the semiconductor.     

Search for giant Franz-Keldysh-like effects in GaSe and other layered semiconductors

Recently, an anomalously large redshift of the absorption edge with electric field was claimed for -GaSe_1–x S _x layered crystals. We have studied Bridgman grown -GaSe crystals as well as vapor transport grown -GaS, and 2H-WSe₂. While we have observed a shift in the absorption edge for -GaSe similar to that reported in previous work, our results demonstrate that the redshift arises from Joule heating, and is thus temperature induced, rather than intrinsic. For -GaS, much larger resistivities virtually eliminate Joule heating, and our measurements of the electric field induced absorption edge shift yield an estimated upper limit of approximately 0.04 meV · cm/kV for a field of 2.4×10³ kV/cm, in good agreement with the theoretical value expected for the Franz-Keldysh effect.Also at University of Konstanz     

Polymer films on electrodes: investigation of ion transport at poly(3,4-ethylenedioxythiophene) films by scanning electrochemical microscopy

Electropolymerization, morphology characterization, and ion transport of poly(3,4-ethylenedioxythiophene) (PEDOT) films doped with different counterions (chloride, ferrocyanide (FCN), and poly(p-styrenesulfonate) (PSS-)) on a platinum electrode were investigated using scanning electrochemical microscopy (SECM) during both potential step (chronocoulometric) and cyclic voltammetric scans. An ultramicroelectrode (UME) tip was positioned close to the surface of a PEDOT-modified substrate electrode, and the responses of both electrodes to a substrate potential step or linear sweep were monitored simultaneously. Chloride or ferrocyanide (FCN) ejection during PEDOT reduction was shown to be a function of the reduction potential. The nature of the cation in the bulk solution was not found to be important in the kinetics of ion transport in PEDOT+/FCN- films. Direct evidence for the incorporation of cations of Ru(NH3)6(3+/2+) in a PEDOT film during its reduction was also obtained by SECM measurements. The adsorption of Ru(NH3)6(3+) in fully oxidized PEDOT+/PSS- films was observed and attributed to ion exchange between the Na+ co-ion of PSS- and Ru(NH3)6(3+) in the bulk solution.     

Determination of relative response factors of impurities in paclitaxel with high performance liquid chromatography equipped with ultraviolet and charged aerosol detectors

A case study was conducted to determine the relative response factors (RRFs) of paclitaxel-related impurities by high performance liquid chromatography (HPLC) equipped with an ultraviolet (UV) detector and charged aerosol detector (CAD) in tandem. The peak response using CAD was independent of analyte structure in an isocratic analysis for this application. After a sample containing known and unknown impurities was analyzed with HPLC-UV-CAD, an empirical approach was developed to calculate the RRFs for all impurities. The RRFs of known impurities were also determined by linear calibration curves. For known impurities, the RRFs values determined with two approaches are comparable. The new approach is effective yet simpler to determine the RRFs for unknown impurities or degradation products since the need for obtaining authentic pure materials was eliminated.     

A two-step procedure for the preparation of mono-protected bis-N-heterocyclic alkyl ether systems

A two-step convenient sequence for the synthesis of previously inaccessible mono-Boc-protected bis-N-heterocyclic alkyl substituted ether derivatives 4 is described. Mitsunobu protocol was applied to the preparation of pyridinyl ether precursor 5. The reduction of the electron rich pyridinyl system 5 has been achieved catalytically using the combination of PtO₂-H₂SO₄ or PtO₂-pTsOH under a hydrogen atmosphere maintained by a gas balloon at ambient temperature.     

Reversible changes in solution pH resulting from changes in thermoresponsive polymer solubility

Pendant groups on polymers that have lower-critical solution temperature (LCST) properties experience a water-like environment below the LCST where the polymer is soluble but are less hydrated above the LCST when the polymer phase separates from solution. When these pendant groups are amphoteric groups like carboxylate salts or ammonium salts, the change in solvation that accompanies the polymer precipitation event significantly changes these groups' acidity or basicity. These changes in acidity or basicity can lead to carboxylate salts forming carboxylic acid groups by capturing protons from the bulk solvent or ammonium salts reverting to the neutral amine by release of protons to the bulk solvent, respectively. When polymers like poly(N-isopropylacrylamide) that contain a sufficient loading of such comonomers are dissolved in solutions whose pH is near the pK(a) of the pendant acid or basic group and undergo an LCST event, the LCST event can change the bulk solution pH. These changes are reversible. These effects were visually followed using common indicators with soluble polymers and or by monitoring solution pH as a function of temperature. LCST events triggered by the addition of a kosmotropic salt lead to similar reversible solution pH changes.     

Synthesis, photophysical, photochemical, and computational studies of coumarin-labeled nicotinamide derivatives

The syntheses and photophysical/photochemical properties of two amide-tethered coumarin-labeled nicotinamides are described. Photochemical studies of 6-bromo-7-hydroxycoumarin-4-ylmethylnicotinamide (BHC-nicotinamide) revealed an unexpected solvent effect. This result is rationalized by computational studies of the different protonation states using TD-DFT with the M06L/6-311+G** method with implicit and explicit solvation models. Molecular orbital energies responsible for the λ(max) excitation show that the functionalization of the coumarin ring results in a strong red-shift from 330 to 370 nm when the pH of solution is increased from 3.06 to 8.07. From this MO analysis, a model for solvent interactions has been proposed. The BHC-nicotinamide proved to be photochemically stable, which is also interpreted in terms of NBO calculations. The results provide a set of principles for the rational design of either photostable labeling reagents or photolabile cage compounds.     

Infrared spectra of M+NO 3 − contact ion pairs in aprotic solvents and matrix isolated in the corresponding glasses

Studies of the vibrational spectra of matrix-isolated M⁺NO ₃ ^– ion pairs have been extended to glassy aprotic solvents. The deuterated form of the solvents DMSO, THF, and ACN have windows through the 7- nitrate ionv ₃(e) mode infrared region, so it was possible to clearly observe the splitting of the degeneracy of this mode,v ₃, produced by the contacting, but solvated, alkali metal cation. Primary attention has been directed to the extent to which this splitting is reduced relative to the argon matrix values. This reduction, which reflects electron-density transfer from the solvating molecules to the ion pairs, is comparable to that observed for H₂O and NH₃ matrices as the splitting is reduced to 20–35% of the argon-matrix values. The extent of reduction ofv ₃ for the different solvents has been related to Gutmann's donicity number scale with the correlation holding well for solvent molecules of comparable size, DMSO, THF and DMF, but breaking down for the smaller linear ACN, apparently because of more molecules in the cation solvation sphere. The matrix data have also been used, through comparison with spectra for saturated liquid solutions of Li⁺NO ₃ ^– , to show that the contact ion pair is the dominant species in liquid THF and ACN, whereas the ions are largely solvent separated in DMSO.     

A synthesis of some novel 4,5-dihydroazepines by the reaction of oxazolium 5-oxides with 1,2-dicyanocyclobutene

Heating primary or secondary α-amino acids in acetic anhydride in the presence of 1,2-dicyanocyclobutene leads to 4,5-dihydroazepines via the intermediacy of mesoionic oxazolium 5-oxides.