Characterization of mixtures of biocidal oligoguanidines by capillary electrophoresis and high-performance liquid chromatography coupled to mass spectrometry

The polycondensation of guanidine hydrochloride and 2,2′-(ethylenedioxy)bis(ethylamine) leads to various types of oligomeric guanidines exhibiting a broad spectrum of biocidal activities. In the present work a reversed-phase high-performance liquid chromatographic method with a gradient consisting of aqueous 0.1% trifluoroacetic acid and acetonitrile as mobile phase has been developed to separate these oligoguanidines according to type and chain length. The combination with electrospray mass spectrometry allowed the identification of the various compounds. By this technique, some structures already suggested in the literature could be confirmed, and several additional oligoguanidines not yet reported could be identified. As a complementary technique, capillary zone electrophoresis was investigated. Best results were obtained with carrier electrolytes consisting of phosphoric acid in water/acetonitrile mixtures. Although the number of peaks that could be separated by the electrophoretic method was considerably lower than in case of the chromatographic method, capillary electrophoresis in combination with UV detection at 195 nm may still be a fast method suitable for quantitation of some of the major compounds and for monitoring the reaction rate during the polycondensation reaction.     

A fast-screening approach for the tentative identification of drug-related metabolites from three non-steroidal anti-inflammatory drugs in hydroponically grown edible plants by HPLC-drift-tube-ion-mobility quadrupole time-of-flight mass spectrometry

The (tentative) identification of unknown drug-related phase II metabolites in plants upon drug uptake remains a challenging task despite improved analytical instrument performance. To broaden the knowledge of possible drug metabolization, a fast-screening approach for the tentative identification of drug-related phase II metabolites is presented in this work. Therefore, an in silico database for the three non-steroidal anti-inflammatory drugs (ketoprofen, mefenamic acid, and naproxen) and a sub-group of their theoretical phase II metabolites (based on combinations with glucose, glucuronic acid, and malonic acid) was created. Next, the theoretical exact masses (protonated species and ammonia adducts) were calculated and used as precursor ions in an autoMS/MS measurement method. The applicability of this workflow was tested on the example of eleven edible plants, which were hydroponically grown in solutions containing the respective drug at a concentration level of 20 mg/L. For the three drugs investigated this led to the tentative identification of 41 metabolites (some of them so far not described in this context), such as combinations of hydroxylated mefenamic acid with up to four glucose units or hydroxylated mefenamic acid with two glucose and three malonic acid units.     

Determination of Low-Molecular-Mass Phenolic and Non-Phenolic Lignin Degradation Compounds in Wood Digestion Solutions by Capillary Electrophoresis

 Different capillary electrophoretic techniques were investigated and compared for the separation of low-molecular-mass phenolic and neutral lignin degradation compounds. Simple capillary zone electrophoresis (CZE) was not suited for this problem. Switching to micellar electrokinetic capillary chromatography (MEKC) by adding micelle-forming reagents to the carrier electrolyte enhanced the separation performance considerably. Alternatively, microemulsion electrokinetic chromatography (MEEKC) was investigated. This is a CE technique in which analytes interact with moving oil droplets present in a microemulsion buffer. Using the optimized carrier electrolyte systems and a 60 cm×50 μm I.D. bubble cell capillary it was possible to analyse solutions of different wood digestion procedures and to investigate differences in lignin degradation products during use of different kinds of wood (eucalyptus, beech, scotch pine and acacia). Received August 25, 1999. Revision April 13, 2000     

Determination of antidepressants in surface and waste water samples by capillary electrophoresis with electrospray ionization mass spectrometric detection after preconcentration using off-line solid-phase extraction

A method for the quantitative determination of seven major antidepressants in surface waters and sewage treatment plant effluents by CE using ESI-MS is presented. Calibration curves for the selected analytes were prepared in Milli-Q purified water and Danube river water extract covering a concentration range of at least one order of magnitude. LODs achieved were between 6 and 13 microg/L for Trazodone and 39 and 53 microg/L for Sertraline in the Milli-Q purified water and Danube river water matrix, respectively. For sample preparation eight different SPE materials were investigated. Best results were obtained for a resin based on hydrophilic divinylbenzene (recoveries from Milli-Q purified water 93-96%; from Danube river water 85-99%). Finally, a series of eight sewage treatment plant effluents were investigated with respect to their content in the selected antidepressants. Six of these samples were tested positive for antidepressants, in particular Venlafaxine, Citalopram and Trazodone in concentrations between 36 and 322 ng/L.     

Ein schwefelselektiver detektor für die flüssigkeits-chromatographie auf konduktometrischer basis

A conductometric procedure for the determination of sulfur in organic solvents is described. The sample is nebulized by a stream of oxygen and the sulfur dioxide produced by combustion at 1300° C is swept into an absorption solution, the increase in conductivity being recorded. The working range is about 1–100 mMol Sl^-1 and the response time about 30s. Interferences of N, P and halogens are discussed. The halogen interference can be eliminated with silver wool, but the sensitivity for sulfur is then reduced.     

Analysis of pyrimidine derivatives by capillary electrophoresis

Summary A capillary electrophoretic method has been developed for the determination of the main product as well as of by-products in technical samples of substituted pyrimidines. Both zone electrophoresis and micellar electrokinetic chromatography have been used for the separation employing electrolytes consisting of borate buffers (pH 9 to 9.4) with or without sodium dodecylsulfate. Optimization of separation selectivity could be achieved by addition of up to 20% 2-propanol or methanol to the carrier electrolyte. Quantification by internal standards resulted in relative standard deviations between 0.2 and 0.8%. By-products could be analyzed down to levels of 0.1% in technical samples.

---

Analyse von Pyrimidinderivaten mitteles Kapillarelektrophorese

Zusammenfassung Für die Bestimmung von Haupt- und Nebensubstanzen in technischen Proben von substituierten Pyrimidinen wurde ein kapillarelektrophoretisches Analysenverfahren entwickelt. Sowohl Zonenelektrophorese als auch mizellare elektrokinetische Chromatographie mit Trägerelektrolyten bestehend aus Boratpuffern (pH 9 bis 9.4) mit oder ohne Natriumdodecylsulfat wurden für die Trennung eingesetzt. Eine Optimierung der Trennselektivität war durch die Zugabe von bis zu 20% 2-Propanol oder Methanol zum Trägerelektrolyten möglich. Quantifizierung mittels interner Standards ergab relative Standardabweichungen zwischen 0.2 und 0.8%. Nebenprodukte konnten in technischen Proben bis zu Gehalten von 0.1% analysiert werden.

     

Determination of iodide and bromide by ion chromatography with post-column reaction detection

During an investigation into the mechanism of the biosynthesis of thyroid hormones, it became necessary to determine traces of iodide and bromide in biological matrices as well as in food. A vydac 302-IC anion-exchange column with methanesulphonic acid as the mobile phase was used for the ion chromatographic separation of iodide and bromide. A post-column reaction detector was developed based on the reaction between iodide or bromide, chloramine-T and 4,4'-bis(dimethylamino)diphenylmethane. Methods with minimal sample preparation are described for determination of iodide or bromide in serum, milk, salt and water. The detection limit is ca. 20 pg iodide and 15 ng bromide injected.     

Improved capillary electrophoretic separation of nine (fluoro)quinolones with fluorescence detection for biological and environmental samples

A capillary electrophoretic method has been developed for the separation of nine (fluoro)quinolones. Detection is done by fluorescence measurement with broad wavelength band excitation between 240 and 400 nm. Best separation is achieved in a carrier electrolyte containing 50 mM H3PO4 adjusted to pH 7.55-acetonitrile (60:40, v/v). Detection limits are in the low microgl(-1) range. The suitability to real samples has been demonstrated by analyzing blood samples and surface water samples. Sample preconcentration and sample clean-up can easily be done by solid-phase extraction. Different phases based on alkyl- or phenyl-modified silica as well as on polymers have been investigated for this purpose. The method should also be useful for determination of residues of (fluoro)quinolones in food or other matrices.