Rapid water reduction to H2 catalyzed by a cobalt bis(iminopyridine) complex

A cobalt bis(iminopyridine) complex is a highly active electrocatalyst for water reduction, with an estimated apparent second order rate constant k(app) ≤ 10(7) M(-1)s(-1) over a range of buffer/salt concentrations. Scan rate dependence data are consistent with freely diffusing electroactive species over pH 4-9 at room temperature for each of two catalytic reduction events, one of which is believed to be ligand based. Faradaic H(2) yields up to 87 ± 10% measured in constant potential electrolyses (-1.4 V vs SCE) confirm high reactivity and high fidelity in a catalyst supported by the noninnocent bis(iminopyridine) ligand. A mechanism involving initial reduction of Co(2+) and subsequent protonation is proposed.     

On the efficacy of electrocatalysis in nonaqueous Li-O2 batteries

Heterogeneous electrocatalysis has become a focal point in rechargeable Li-air battery research to reduce overpotentials in both the oxygen reduction (discharge) and especially oxygen evolution (charge) reactions. In this study, we show that past reports of traditional cathode electrocatalysis in nonaqueous Li-O(2) batteries were indeed true, but that gas evolution related to electrolyte solvent decomposition was the dominant process being catalyzed. In dimethoxyethane, where Li(2)O(2) formation is the dominant product of the electrochemistry, no catalytic activity (compared to pure carbon) is observed using the same (Au, Pt, MnO(2)) nanoparticles. Nevertheless, the onset potential of oxygen evolution is only slightly higher than the open circuit potential of the cell, indicating conventional oxygen evolution electrocatalysis may be unnecessary.     

Design and development of functionalized cyclometalated ruthenium chromophores for light-harvesting applications

The syntheses and the electrochemical spectroscopic properties of a suite of asymmetrical bistridentate cyclometalated Ru(II) complexes bearing terminal triphenylamine (TPA) substituents are reported. These complexes, which contain structural design elements common to both inorganic and organic dyes that exhibit superior power conversion efficiencies in the dye-sensitized solar cell (DSSC), are broadly formulated as [Ru(II)(L-2,5'-thiophene-TPA-R(1))(L-R(2))](+) [L = tridentate chelating ligand (e.g., 2,2':6',2'-terpyridine (tpy); deprotonated forms of 1,3-di(pyridin-2-yl)benzene (Hdpb) or 6-phenyl-2,2'-bipyridine (Hpbpy)); R(1) = -H, -Me, -OMe; R(2) = -H, -CO(2)Me, -CO(2)H]. The following structural attributes were systematically modified for the series: (i) electron-donating character of the terminal substituents (e.g., R(1) = -H, -Me, -OMe) placed para to the amine of the "L-2,5'-thiophene-TPA-R(1)" ligand framework; (ii) electron-withdrawing character of the tridentate chelate distal to the TPA-substituted ligand (e.g., R(2) = -H, -CO(2)Me, -CO(2)H); and (iii) position of the organometallic bond about the Ru(II) center. UV-vis spectra reveal intense and broad absorption bands arising from a collection of metal-to-ligand charge-transfer (MLCT) and TPA-based intraligand charge-transfer (ILCT) transitions that, in certain cases, extend beyond 800 nm. Electrochemical data indicate that the oxidative behavior of the TPA and metal chelate units can be independently modulated except in cases where the anionic phenyl ring is in direct conjugation with the TPA unit. In most cases, the anionic character of the cyclometalating ligands renders a metal-based oxidation event prior to the oxidation of the TPA unit. This situation can, however, be reversed with an appropriately positioned Ru-C bond and electron-rich R(1) group. This finding is important in that this arrangement confines the highest occupied molecular orbital (HOMO) to the TPA unit rather than the metal, which is optimal for sensitizing TiO(2); indeed, a remarkably high power conversion efficiency (η) in the DSSC (i.e., 8.02%) is measured for the TPA-substituted pbpy(-) chelate where R(1) = -OMe. These results provide a comprehensive strategy for improving the performance of bistridentate Ru sensitizers devoid of NCS(-) groups for the DSSC.     

Molybdenum-mediated synthesis of quinazolin-4(3H)-ones via cyclocarbonylation using microwave irradiation

A new, efficient and practical synthesis of quinazolin-4(3H)-ones is reported via molybdenum-mediated cyclocarbonylation using microwave irradiation. These methods allow access to a wide range of quinazolin-4(3H)-ones in reasonable yields without the need for gaseous carbon monoxide and palladium catalysts. A range of reactions illustrating the wide scope of this chemistry was carried out and all proceeded in reasonable yields.     

Probing the structural origins of vapochromism of a triarylboron-functionalized platinum(II) acetylide by optical and multinuclear solid-state NMR spectroscopy

A vapoluminescent triarylboron-functionalized platinum(II) complex that displays a mechanism of vapochromism differing from all previously reported platinum(II) compounds has been synthesized. The luminescence color of 1 switches in response to many volatile organic compounds in the solid state, including hexanes, CH(2)Cl(2), benzene, and methanol. While vapochromism due to changes in Pt-Pt or π-π stacking interactions has been commonly observed, absorption and luminescence studies and single-crystal and powder X-ray diffraction data as well as multinuclear solid-state NMR experiments ((195)Pt, (13)C, (11)B, (2)H, and (1)H) revealed that the vapochromic response of 1 is instead due to changes in the excited-state energy levels resulting from local interactions of solvent molecules with the complex. Furthermore, these interactions result in inversion of the lowest-energy excited states of the complex in some cases, the first observation of this phenomenon in the solid state.     

Influence of carrier gas on the prediction of gas chromatographic retention times based on thermodynamic parameters

We present an investigation into the influence of carrier gas on the thermodynamics governing a capillary gas chromatographic separation. Thermodynamic parameters are estimated for a series of alkanes and alcohols on three common stationary phases using helium, hydrogen, and nitrogen carrier gases. It is shown that the substitution of carrier gases for one another results in a change in the thermodynamic parameters governing the separation. The effect of the carrier gas on the thermodynamic parameters is large enough to compromise the accuracy of the retention time calculations based on thermodynamic parameters collected in a carrier gas other than the one actually in use in a specific gas chromatographic system. A possible kinetic explanation for these observations is also investigated.     

Detection of pulse trains in the electrically stimulated cochlea: effects of cochlear health

Perception of electrical stimuli varies widely across users of cochlear implants and across stimulation sites in individual users. It is commonly assumed that the ability of subjects to detect and discriminate electrical signals is dependent, in part, on conditions in the implanted cochlea, but evidence supporting that hypothesis is sparse. The objective of this study was to define specific relationships between the survival of tissues near the implanted electrodes and the functional responses to electrical stimulation of those electrodes. Psychophysical and neurophysiological procedures were used to assess stimulus detection as a function of pulse rate under the various degrees of cochlear pathology. Cochlear morphology, assessed post-mortem, ranged from near-normal numbers of hair cells, peripheral processes and spiral ganglion cells, to complete absence of hair cells and peripheral processes and small numbers of surviving spiral ganglion cells. The psychophysical and neurophysiological studies indicated that slopes and levels of the threshold versus pulse rate functions reflected multipulse integration throughout the 200 ms pulse train with an additional contribution of interactions between adjacent pulses at high pulse rates. The amount of multipulse integration was correlated with the health of the implanted cochlea with implications for perception of more complex prosthetic stimuli.     

Fast integral equation methods for the modified Helmholtz equation

We present integral equation methods for the solution to the two-dimensional, modified Helmholtz equation, u(x) ? α²Δu(x) = 0, in bounded or unbounded multiply-connected domains. We consider both Dirichlet and Neumann problems. We derive well-conditioned Fredholm integral equations of the second kind, which are discretized using high-order, hybrid Gauss-trapezoid rules. Our fast multipole-based iterative solution procedure requires only O(N) operations, where N is the number of nodes in the discretization of the boundary. We demonstrate the performance of our methods on several numerical examples, and we show that they have both the ability to handle highly complex geometry and the potential to solve large-scale problems.     

Local minimizers and planar interfaces in a phase-transition model with interfacial energy

Interfacial energy is often incorporated into variational solid-solid phase transition models via a perturbation of the elastic energy functional involving second gradients of the deformation. We study consequences of such higher-gradient terms for local minimizers and for interfaces. First it is shown that at slightly sub-critical temperatures, a phase which globally minimizes the elastic energy density at super-critical temperatures is an L ¹-local minimizer of the functional including interfacial energy, whereas it is typically only a W ^1,??-local minimizer of the purely elastic functional. The second part deals with the existence and uniqueness of smooth interfaces between different wells of the multi-well elastic energy density. Attention is focussed on so-called planar interfaces, for which the deformation depends on a single direction x · N and the deformation gradient then satisfies a rank-one ansatz of the form ${Dy(x) = A + u(x \cdot N) \otimes N}$ , where A and ${B=A+a \otimes N}$ are the gradients connected by the interface.     

Thermochemistry and quantum chemical calculations of two dibenzocycloalkane nitriles

The energies of combustion and fusion of 5-cyano-5H-dibenzo[a,d]cycloheptene (1) and (5E,11E)-dibenzo[a,e]cyclooctene-5,11-dicarbonitrile (2) were measured by means of microbomb calorimetry and DSC, respectively. The derived enthalpies of formation in solid state are 320 ± 18 for nitrile 1 and 470 ± 31 kJ mol⁻¹ for nitrile 2, respectively. The experimental enthalpies of formation are discussed in relationship with values calculated at the G3(MP2)//B3LYP level of quantum chemical theory, by means of group additivity and isodesmic reactions. The two nitriles are not stabilized by dibenzoannelation.