Built to order: molecular tinkertoys from the [Re(6)(mu(3)-Se)(8)](2+) clusters

Ligand substitution of [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(CH(3)CN)](SbF(6))(2) (1) with pyridyl-based ligands, 2,4,6-tri-4-pyridyl-1,3,5-triazine (L1) and 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (L2), produced respectively the star-shaped tricluster (T1) and tetracluster (T2) arrays, wherein three (T1) and four (T2) units of the [Re(6)(mu(3)-Se)(8)](2+) core-containing clusters are interconnected by the corresponding bridging ligands. These novel supramolecular assemblies were characterized by a combination of NMR ((1)H and (31)P) spectroscopy, ESI-MS, and microanalysis. The molecular and solid-state structures of T1 have also been established by single-crystal X-ray diffraction.     

Intermolecular perturbation of CH-stretching diagonal local-mode anharmonicity in 3-methylpentane

CH-stretching overtone spectra of 3-methylpentane are measured for both liquid and low temperature (77 K) solid phases. A local-mode analysis is used to extract the diagonal local-mode anharmonicity constant. The results show that the local vibrational potential is more harmonic at high viscosity.     

The [Sn(9)Pt(2)(PPh(3))](2)(-) and [Sn(9)Ni(2)(CO)](3)(-) complexes: two markedly different Sn(9)M(2)L transition metal zintl ion clusters and their dynamic behavior

[Sn(9)Pt(2)(PPh(3))](2)(-) (2) was prepared from Pt(PPh(3))(4), K(4)Sn(9), and 2,2,2-cryptand in en/toluene solvent mixtures. The [K(2,2,2-cryptand)](+) salt is very air and moisture sensitive and has been characterized by ESI-MS, variable-temperature (119)Sn, (31)P, and (195)Pt NMR and single-crystal X-ray diffraction studies. The structure of 2 comprises an elongated tricapped Sn(9) trigonal prism with a capping PtPPh(3), an interstitial Pt atom, a hypercloso electron count (10 vertex, 20 electron) and C(3)(v)() point symmetry. Hydrogenation trapping experiments and deuterium labeling studies showed that the formation of 2 involves a double C-H activation of solvent molecules (en or DMSO) with the elimination of H(2) gas. The ESI-MS analysis of 2 showed the K[Sn(9)Pt(2)(PPh(3))](1)(-) parent ion, an oxidized [Sn(9)Pt(2)(PPh(3))](1)(-) ion, and the protonated binary cluster anion [HSn(9)Pt(2)](1)(-). 2 is highly fluxional in solution giving rise to a single time-averaged (119)Sn NMR signal for all nine Sn atoms but the Pt atoms remain distinct. The exchange is intramolecular and is consistent with a rigid, linear Pt-Pt-PPh(3) rod embedded in a liquidlike Sn(9) matrix. [Sn(9)Ni(2)(CO)](3)(-) (3) was prepared from Ni(CO)(2)(PPh(3))(2), K(4)Sn(9), and 2,2,2-cryptand in en/toluene solvent mixtures. The [K(2,2,2-cryptand)](+) salt is very air and moisture sensitive, is paramagnetic, and has been characterized by ESI-MS, EPR, and single-crystal X-ray diffraction. Complex 3 is a 10-vertex 21-electron polyhedron, a slightly distorted closo-Sn(9)Ni cluster with an additional interstitial Ni atom and overall C(4)(v)() point symmetry. The EPR spectrum showed a five-line pattern due to 4.8-G hyperfine interactions involving all nine tin atoms. The ESI-MS analysis showed weak signals for the potassium complex [K(2)Sn(9)Ni(2)(CO)](1-) and the ligand-free binary ions [K(2)Sn(9)Ni(2)](1)(-), [KSn(9)Ni(2)](1)(-), and [HSn(9)Ni(2)](1)(-).     

A precise PKPβ+ measurement at Z = 55: (I). The mass of 130Cs

The Q-value for the ¹²⁹Xe(³He, d)¹³⁰Cs reaction is measured to be +5 ± 20 keV. By combining this result with the known neutron separation energy of ¹³⁰Xe, we derive the total decay energy of ¹³⁰Cs

¹³⁰Xe to beQ_EC = 2974 ± 20 keV. This value agrees well with two previous positron end-point measurements but disagrees with the corresponding value derived from the 1977 atomic mass evaluation. This has significance in testing the accuracy of the calculated ratio for ¹³⁰Cs decay. The mass excess of ¹³⁰Cs is derived to be ?86908 ± 14 keV. An excited state in ¹³⁰Cs. was also identified at 121 ± 15 keV with J < 3 and positive parity. The Q-value for ¹³⁶Xe(³He, d)¹³⁷Cs was measured to be 1918 ± 12 keV.     

A novel way to study the initial stages of soap-free emulsion polymerizations: The intercalation of polystyrene oligomers into hydrotalcite

The dominant species in the early stages of an emulsifier-free emulsion polymerization of styrene has been found to be an oligomer of two to three monomer units using a novel trapping technique. This involved the intercalation of charged primary oligomers between the layers of a hydrotalcite, [Mg₄Al₂(OH)₁₂]²⁺[A]^2- (where A = dianion). Hydrotalcites are an important class of lamellar, inorganic compounds whose interlayer spacing can be mod-ified by anion exchange. Our approach first involved preparing a hydrotalcite precursor in which the layers were propped apart by an organic dianion (terephthalate = TA). This material was then used to capture the negatively charged polystyrene oligomers from the emulsion polymerization reaction mixture. We found that TA was rapidly ion-exchanged for the charged oligomers. The resulting pillared hydrotalcite material was characterized using XRD and SEC. We found that the interlayer spacing between the hydroxide layers increased to 23.2 Å on exposure to the emulsion reaction mixture. This represents an interlayer expansion of 18.3 Å (after subtraction of the hydroxide layer contribution), which is cnsistent with intercalation of oligomers with two to three monomer units arranged in a bilayer. This size estimate was confirmed by the results of size exclusion chromatography. © 1995 John Wiley & Sons, Inc.     

Use of dynamically coated capillaries with added cyclodextrins for the analysis of opium using capillary electrophoresis

A rapid, precise, accurate, and robust method using capillary electrophoresis (CE) with dynamically coated capillaries for the analysis of the major opium alkaloids in opium is presented. Dynamic coating of the capillary surface is accomplished using a commercially available reagent kit (polycation coating followed by polyanion coating). The addition of dual cyclodextrins (hydroxypropyl-beta-cyclodextrin and dimethyl-beta-cyclodextrin) to the run buffer imparts excellent selectivity for the opium alkaloids. For the determination of morphine, papaverine, codeine, noscapine and thebaine in opium gum and opium latex samples (using tetracaine as an internal standard) good agreement with values obtained by gradient high-performance liquid chromatography is obtained. Compared to the latter technique, CE affords better resolution with significantly faster analysis time (12 min versus 29 min). Dynamically coated capillaries, which give rise to a relatively high and robust electroosmotic flow (EOF) at the background electrolyte pH of 2.5, allow for rapid analysis and excellent migration time and peak area precision (RSDs < or = 0.12% and < or = 1.2%, respectively). Reproducible separations (relative migration times) for over 500 samples have been obtained on a single capillary. The nature of the injection solvent, the injection time and the contents of the waste vials have a profound effect on the pressure injection precision of the relatively hydrophobic solutes. The CE conditions reported in this study are also applicable to the analysis of lysergic acid diethylamide (LSD) exhibits.     

Supramolecular structures of coronene and alkane acids at the Au(111)-solution interface: a scanning tunneling microscopy study

Scanning tunneling microscopy (STM) is utilized to study the solution-solid interface formed between Au(111) and solutions of coronene in hexanoic, heptanoic, and octanoic acids. In all three cases adsorbed coronene is observed and lays flat on the metal surface. Heptanoic and hexanoic acid solutions produce a hexagonal symmetry monolayer. For the heptanoic and hexanoic cases, dipole-image dipole interactions and H bonding stabilize a surface structure in which 12 acid molecules surround each coronene and produce a coronene spacing of 1.45 nm. In the case of octanoic acid as solvent, the incorporation of the solvent into the monolayer is not as strongly favored. The coronene spacing can range from close-packed (1.2 nm) with no solvent presumed present in the monolayer, to 1.50 nm with up to 12 solvent molecules surrounding each coronene. The close-packed regions have hexagonal symmetry, as do those with the largest (1.5 nm) spacing. Heptanoic acid solutions give the clearest STM images and are associated with the most stable two-component monolayer. The present paper demonstrates that non-covalent interactions at the solution-metal interface can lead to complex multicomponent monolayer structures.     

Sequential injection analysis with dynamic surface tension detection High throughput analysis of the interfacial properties of surface-active samples

A sequential injection analysis (SIA) system is coupled with dynamic surface tension detection (DSTD) for the purpose of studying the interfacial properties of surface-active samples. DSTD is a novel analyzer based upon a growing drop method, utilizing a pressure sensor measurement of drop pressure. The pressure signal depends on the surface tension properties of sample solution drops that grow and detach at the end of a capillary tip. In this work, SIA was used for creating a reagent concentration gradient, and for blending the reagent gradient with a steady-state sample. The sample, consisting of either sodium dodecyl sulfate (SDS) or poly(ethylene glycol) at 1470 g mol⁻¹ (PEG 1470), elutes with a steady-state concentration at the center of the sample plug. Reagents such as Brij®35, tetrabutylammonium (TBA) hydroxide and β-cyclodextrin were introduced as a concentration gradient that begins after the sample plug has reached the steady-state concentration. By blending the reagent concentration gradient with the sample plug using SIA/DSTD, the kinetic surface pressure signal of samples mixed with various reagent concentrations is observed and evaluated in a high throughput fashion. It was found that the SIA/DSTD method consumes lesser reagent and required significantly less analysis time than traditional FIA/DSTD. Four unique chemical systems were studied with regard to how surface activity is influenced, as observed through the surface tension signal: surface activity addition, surface activity reduction due to competition, surface activity enhancement due to ion-pair formation, and surface activity reduction due to bulk phase binding chemistry.     

Technetium(III), Technetium(II), and Technetium(I) Complexes with Pyridine Ligands. Can Pyridine Coordination Stabilize the Low Oxidation States of Technetium?

The substitution chemistry of TcCl(3)(PPh(3))(2)(CH(3)CN) is rather facile relative to the analogous rhenium complex, since both the chloride and phosphine ligands are easily substituted for various pyridine ligands. Consequently a series of Tc(III) complexes with amine, pyridine, and polypyridyl ligands were prepared and characterized by (1)H NMR and cyclic voltammetry. In addition, the zinc reduction of TcCl(4)(py)(2) in the presence of pyridine results in TcCl(2)(py)(4). Structural and spectroscopic data indicate that this Tc(II) complex exhibits strong metal-pyridine interactions characteristic of low-valent amine complexes of Re(II) and Os(II). For example, a decrease of 0.04 and 0.06 ? is observed for the trans-Tc-N bond length in TcCl(2)(py)(4 )relative to mer-TcCl(3)(pic)(3) and [TcCl(2)(py)(3)(PPh(3))](+), respectively. This ability of pyridine to function both as a strong sigma-donor and moderate pi-acid ligand has resulted in the isolation of technetium complexes in various oxidation states with similar ligand environments. As a result, a structural comparison of [TcCl(2)(py)(3)(PPh(3))](+), TcCl(2)(py)(4), TcCl(tpy)(py)(2), and other known Tc(III) and Tc(II) pyridine complexes is presented. Crystals of [TcCl(2)(py)(3)(PPh(3))]PF(6) are triclinic, with space group P&onemacr;, Z = 2, and lattice parameters a = 12.677(4) ?, b = 13.064(4) ?, c = 13.103(5) ?, alpha = 110.14(3) degrees, beta = 101.12(3) degrees, gamma = 96.61 degrees, V = 1959 ?(3), and R = 0.0615 (R(w) = 0.1148). Crystals of TcCl(2)(py)(4) are tetragonal, with space group I4(1)/acd, Z = 8, and lattice parameters a = 15.641(4) ?, c = 16.845(6) ?, V = 4121 ?(3), and R = 0.0373 (R(w) = 0.0290). Crystals of TcCl(tpy)(py)(2) are orthorhombic, with space group C222(1), Z = 4, and lattice parameters a = 9.359(3) ?, b = 16.088(6) ?, c = 18.367(4) ?, V = 2765 ?(3), and R = 0.0499 (R(w) = 0.0599).     

Tandem Michael‐addition/cyclization synthesis and EGFR kinase inhibition activity of pyrido[2,3‐d]pyrimidin‐7(8H)‐ones

5‐Methoxy and 5‐anilinopyrido[2,3‐d]pyrimidin‐7(8H)‐ones 2a‐2f were obtained by a tandem Michael addition‐cyclization reaction of methanol and anilines with pyrimidinylpropynoate 5. Methoxy derivative 2a was obtained in 62% yield by treatment of 5 with methanol and potassium carbonate. Anilino derivatives 2b‐2f were prepared in 31–71% yields by reacting 5 with the corresponding anilines in refluxing methanol. This methodology accomplishes Michael‐addition and pyridopyrimidinone ring formation in one‐pot and affords the desired products in reasonable yield without chromatography. Propynoate 5 did not react with 4‐cyanoaniline under these conditions. Reaction of 5 with 2‐aminopyridine gave the unexpected arylpyrido[2,3‐d]pyrimidinone 8 in 58% yield and reaction of 5 with imidazole afforded Michael‐adduct 9 in 69% yield. Compounds 2a and 5 were submicromolar inhibitors of epidermal growth factor receptor (EGFR) tyrosine kinase.