Pyroxene inclusions in paleo-Christian mosaic tesserae: a new tool for constraining the glass manufacturing temperature

The mineral inclusions of two orange glass tesserae from paleo-Christian mosaics were investigated in order to derive the melting temperature reached during their production (sourced from Padua and Vicenza, Veneto region, Italy). In particular, clinopyroxene crystals were studied by single-crystal X-ray diffraction and electron microprobe WDS analysis. The crystals show C2/c symmetry, typical of disordered Ca/Na and Mg/Al distributions indicating high-temperature of formation (>700°C). The cation site populations were obtained by combining results from the two experimental techniques enabled us to derive the following stoichiometric formula:

On possible spin injection at non-ideal Schottky contacts

The role of the tunneling mechanisms in metal-disordered layer-semiconductor structure under spin injection at the interface is investigated. The non-ideal metal-semiconductor structure as prepared by ionized cluster beam deposition is considered, and it is shown that the depletion region of the semiconductor can be tailored to include a suitably heavily doped region near the interface. The tunneling is described within a simplified model in which the expression for the interface resistance of the metal-disordered layer-semiconductor structure is obtained. It is argued that in the case of ionized cluster beam deposited non-ideal Schottky structure a significant spin injection is achieved.     

Huge fluctuations in weight measurements at the bottom of a two-dimensional vertical sheet of grains

Weight measurements at the bottom of a quasi-2D vertical sheet of static cohesionless grains are carried out. The grains are held between two coaxial cylinders. This peculiar setup allows us to set either periodic or fixed lateral boundary conditions. Huge relative fluctuations in weight measurements appear in case of fixed lateral walls. This may be related to some indetermination in the mobilization state of friction forces on lateral walls. This argument would hold for any piling, but would lead to huge fluctuations in 2D systems only, because of averaging effects in 3D.     

Limit of hanger linearity in suspension footbridge dynamics: A new section model

The mechanical behaviour of suspension bridges is characterised by nonlinearities due to the main cables geometric effects and to the inability of the hangers to sustain compressive loads. The nonlinear effects due to hanger slackening are expected to increase in suspension footbridges due to lightweight decks, that is, low dead to live load ratio, and to shallow plate-girder decks with very low flexural and torsional stiffness. In this paper a new section model is proposed to study the limit of hanger linearity in lightweight suspension footbridges. The model is inspired to a four degrees-of-freedom model already proposed in the literature, but is expressed with a new formalism that allows some interesting properties to be outlined. Specifically, the expression of a particular frequency, herein called relative antiresonance frequency, as a function of the model generalised properties is derived: if the system is loaded with a harmonic force having that frequency, the linear behaviour of the hangers is assured for every value of the force amplitude. The proposed section model is applied to a footbridge benchmark subject to the pedestrian harmonic load and results are compared with those obtained through a nonlinear dynamic analysis on a 3D Finite Element model of the bridge.     

Turbulence transition and the edge of chaos in pipe flow

The linear stability of pipe flow implies that only perturbations of sufficient strength will trigger the transition to turbulence. In order to determine this threshold in perturbation amplitude we study the edge of chaos which separates perturbations that decay towards the laminar profile and perturbations that trigger turbulence. Using the lifetime as an indicator and methods developed in Skufca et al., Phys. Rev. Lett. 96, 174101 (2006), we show that superimposed on an overall 1/Re scaling predicted and studied previously there are small, nonmonotonic variations reflecting folds in the edge of chaos. By tracing the motion in the edge we find that it is formed by the stable manifold of a unique flow field that is dominated by a pair of downstream vortices, asymmetrically placed towards the wall. The flow field that generates the edge of chaos shows intrinsic chaotic dynamics.     

Giant spin splitting through surface alloying

The long-range ordered surface alloy Bi/Ag(111) is found to exhibit a giant spin splitting of its surface electronic structure due to spin-orbit coupling, as is determined by angle-resolved photoelectron spectroscopy. First-principles electronic structure calculations fully confirm the experimental findings. The effect is brought about by a strong in-plane gradient of the crystal potential in the surface layer, in interplay with the structural asymmetry due to the surface-potential barrier. As a result, the spin polarization of the surface states is considerably rotated out of the surface plane.     

Additive-subtractive phase-modulated speckle interferometry: Fringe visibility under partial decorrelation

Additive-subtractive phase modulated speckle interferometry (ASPMSI) is a technique that minimizes the susceptibility of speckle methods to environmental noise while providing fringes of good visibility. The method requires the acquisition of two consecutive video frames of additive-speckle images of the same two deformed states of an object at a rapid enough rate such that ambient noise is not a problem. The additive-speckle images as expected are of very poor visibility due to the presence of the self-interference term. An interframe phase-modulation is introduced and the two additive-speckle images are digitally subtracted to improve the fringe visibility by removing the self-interference term. The ASPM-SI method works with in-plane and out-of-plane deformation sensitive ESPI as well as with displacement-gradient sensitive speckle-shearing interferometry. It is shown that the ASPM-SI scheme has higher visibility than conventional additive-SI and performs consistently better than subtractive-SI schemes in the presence of partial interframe speckle decorrelating optical noise. Furthermore, it is shown that the fringe visibility of the out-of-plane displacement sensitive interferometer which uses a protected reference beam separate from the object beam can be made to be essentially unity even at complete interframe decorrelation.     

Damped oscillations in the energy autocorrelation functions of the 58Ni+46Ti elastic and 58Ni+62Ni elastic and inelastic scattering cross sections

Structures of non-statistical character, recently observed in ⁵⁸ Ni +⁴⁶ Ti elastic and ⁵⁸ Ni +⁶² Ni elastic and inelastic excitation functions, produce damped oscillations in the cross section energy autocorrelation functions. The analysis of these damped oscillations in terms of S-matrix spin and parity decoherence indicates, as a possible interpretation, damping of the coherent rotational motion of the intermediate dinuclear system formed in the reaction.     

Inverse scattering problem for optical coherence tomography

We deal with the imaging problem of determining the internal structure of a body from backscattered laser light and low-coherence interferometry. Specifically, using the interference fringes that result when the backscattering of low-coherence light is made to interfere with the reference beam, we obtain maps detailing the values of the refractive index within the sample. Our approach accounts fully for the statistical nature of the coherence phenomenon; the numerical experiments that we present, which show image reconstructions of high quality, were obtained under noise floors exceeding those present for various experimental setups reported in the literature.     

Fluorescent Properties of a Hybrid Cadmium Sulfide-Dendrimer Nanocomposite and its Quenching with Nitromethane

A fluorescent hybrid cadmium sulphide quantum dots (QDs) dendrimer nanocomposite (DAB-CdS) synthesised in water and stable in aqueous solution is described. The dendrimer, DAB-G5 dendrimer (polypropylenimine tetrahexacontaamine) generation 5, a diaminobutene core with 64 amine terminal primary groups. The maximum of the excitation and emission spectra, Stokes’ shift and the emission full width of half maximum of this nanocomposite are, respectively: 351, 535, 204 and 212 nm. The fluorescence time decay was complex and a four component decay time model originated a good fit (χ = 1.20) with the following lifetimes: τ ₁ = 657 ps; τ ₂ = 10.0 ns; τ ₃ = 59.42 ns; and τ ₄ = 265 ns. The fluorescence intensity of the nanocomposite is markedly quenched by the presence of nitromethane with a dynamic Stern-Volmer constant of 25 M⁻¹. The quenching profiles show that about 81% of the CdS QDs are located in the external layer of the dendrimer accessible to the quencher. PARAFAC analysis of the excitation emission matrices (EEM) acquired as function of the nitromethane concentration showed a trilinear data structure with only one linearly independent component describing the quenching which allows robust estimation of the excitation and emission spectra and of the quenching profiles. This water soluble and fluorescent nanocomposite shows a set of favourable properties to its use in sensor applications.