Live biotherapeutic products: the importance of a defined regulatory framework

Probiotics have been defined as “Live microorganisms that when administered in adequate amounts confer a health benefit on the host”. This definition covers a wide range of applications, target populations and (combinations of) microorganisms. Improved knowledge on the importance of the microbiota in terms of health and disease has further diversified the potential scope of a probiotic intervention, whether intended to reach the market as a food, a food supplement or a drug, depending on the intended use. However, the increased interest in the clinical application of probiotics may require specific attention given their administration in a diseased population. In addition to safety, the impact of the type of product, in terms of quality, production method and, e.g., the acceptance of side effects, is now part of the current regulatory constraints for developers. In the European Union, foods are regulated by the European Food Safety Authority and drugs by the European Medicines Agency; in the United States, the Food and Drug Administration (FDA) deals with both categories. More recently, the FDA has defined a new “live biotherapeutic products” (LBP) category, clarifying pharmaceutical expectations. Since 2019, the quality requirements for this category of drug products have also been clarified by the European Pharmacopoeia (Ph. Eur.). Similar to all products intended to prevent or treat diseases, LBPs will have to be registered as medicinal products to reach the market in the US and in Europe. In this area, regulatory authorities and the pharmaceutical industry will routinely use guidelines of the “International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use” (ICH). Although ICH guidelines are not legally binding, they provide very important recommendations, recognized by almost all drug authorities in the world. In this review, we discuss some aspects of this regulatory framework, especially focusing on products with an intended use in a diseased or vulnerable target population.Subject terms: Biological therapy, Biologics     

Binary and Ternary Complexes Between Lauryl Hexaoxyethylene, Benzoate and Cyclodextrin. Part II. β-CD

The characterization of binary and ternary complexes of benzoate, lauryl hexaoxyethylene (C₁₂E₆) and -CD is presented. The complexation equilibrium was characterized by UV-Vis spectrophotometry, titration microcalorimetry, capillary electrophoresis, and 2D ROESY ¹H-NMR. Results suggested that -CD forms one complex with C₁₂E₆in the stoichiometric ratio of -CD : C₁₂E₆1.5 : 1, with a stability constant 1.3 × 10⁵ M^-1.5. The 2-D ROESY ¹H-NMR spectrum indicated that C₁₂E₆is included inside the -CD cavity. The primary binding site of C₁₂E₆ is on the lauryl subunit of this molecule. Analogous to a previously reported study of -CD, the combination of -CD and C₁₂E₆precipitated from the solution. Addition of benzoate seemed to dissolve the precipitate and nearly doubled the apparent stability constant of the complex. Results from the various techniques supported formation of ternary complexes between -CD, C₁₂E₆, and benzoate.     

Structure-NMR chemical shift relationships for novel functionalized derivatives of quinoxalines

(1)H, (13)C and (15)N NMR chemical shifts for a variety of novel quinoxalines were determined by different 2D methods and were calculated using the GIAO DFT approach. Comparison with experimental data shows good correlations in the case of (1)H, (13)C and (15)N chemical shifts. Different combinations of basis sets were tested. In non-polar solvents quinoxalines exist as dimers owing to strong hydrogen bonding. Calculations for dimers improve the correlation between experiment and theory. Additive empirical methods for estimating chemical shifts have drawbacks and have to be used with a great care for this type of compound.     

Photochemische Reaktionen. 121. Mitteilung. Zur Photochemie von ε,ζ-Methano-α,γ-dienonen und 7,8-Methano-1,3,5-trienen

Photochemistry of ε,ζ-Methano-α,γ-dienones and 7,8-Methano-1,3,5-trienes Irradiation of the δ-cyclopropyl-dienone (E)- 6 (λ ≥ 347 nm) gives (Z)- 6, 10 (1,5-sigmatropic H-shift), (E/Z)- 9 (electrocyclic process involving C(ε), C(ζ)-cleavage) and 11 (ring opening). The corresponding 6-cyclopropyl-triene (E)- 7 gives on singlet excitation (δ > 280 nm) 14 (1,5-sigmatropic H-shift) and, to a smaller extent, the bicyclo [3.2.0] heptenyl-dienes (E/Z)- 13 . However, on triplet excitation (λ ≥ 347 nm, benzophenone) (E)- 7 gives (E/Z)- 13 as the main products. On both ¹π,π*- and ³π,π*-excitation, (Z)- 7 and 15 are formed in small amounts.     

Second harmonic generation in polymers containing a new azo chromophore based on phenylnitrobenzoxazole

The synthesis of the new chromophores 2‐{4‐[4‐(N,N‐dihydroxyethylamino)‐phenylazo]‐phenyl}‐6‐nitrobenzoxazole ( 1 ) and 4‐[4‐(N,N‐dihydroxyethylamino)phenylazo]‐benzoic acid ( 2 ) is described. Three homopolymers obtained by the polycondensation of 1 with propyloxy‐terephthalic acid and 1 and 2 with 2,4‐tolylenediisocianate as well as two copolymers obtained by polycondensation of appropriate mixtures of chromophores 1 and 2 with 2,4‐tolylene‐diisocianate were prepared and characterized. All as‐prepared polymers but one (homopolyurethane of 1 ) were amorphous and exhibited good optical clarity, good thermal stability above the glass transition, and solubility in organic solvents. The second‐order nonlinear optical behavior of the amorphous polymers was investigated on spin‐coated corona‐poled films through second harmonic generation (SHG) experiments at 1064 nm. At this wavelength, resonance‐enhanced values of the SHG coefficient d₃₃ were found in the range between 6 and 34 pm/V where higher values were observed for polymers with a higher molar content of 1 . © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1468–1475, 2002     

Ruthenium(II) complexes with ferrocene-modified arene ligands: synthesis and electrochemistry

A series of arene-ruthenium complexes of the general formula [RuCl₂{η⁶-C₆H₅(CH₂)₂R}L] with R=OH, CH₂OH, OC(O)Fc, CH₂OC(O)Fc (Fc=ferrocenyl) and L=PPh₃, (diphenylphosphino)ferrocene, or bridging 1,1^′-bis(diphenylphosphino)ferrocene, have been synthesized. Two synthetic pathways have been used for these ferrocene-modified arene-ruthenium complexes: (a) esterification of ferrocene carboxylic acid with 2-(cyclohexa-1,4-dienyl)ethanol, followed by condensation with RuCl₃ · nH₂O to afford [RuCl₂{η⁶-C₆H₅(CH₂)₂OC(O)Fc}]₂, and (b) esterification between ferrocene carboxylic acid and [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}L] to give [RuCl₂{η⁶-C₆H₅(CH₂)₃OC(O)Fc}L]. All new compounds have been characterized by NMR and IR spectroscopy as well as by mass spectrometry. The single-crystal X-ray structure analysis of [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}(PPh₃)] shows that the presence of a CH₂CH₂CH₂OH side-arm allows [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}(PPh₃)] to form an intramolecular hydrogen bond with a chlorine atom. The electrochemical behavior of selected representative compounds has been studied. Complexes with ferrocenylated side arms display the expected cyclic voltammograms, two independent reversible one-electron waves of the Ru(II)/Ru(III) and Fe(II)/Fe(III) redox couples. Introduction of a ferrocenylphosphine onto the ruthenium is reflected by an additonal reversible, one-electron wave due to ferrocene/ferrocenium system which is, however, coupled with the Ru(II)/Ru(III) redox system.     

Affinity capillary electrophoresis study of the linkage existing between proton and zinc ion binding to bacitracin A1

Measurements by capillary electrophoresis (CE) of bacitracin A(1) effective mobility at different pH values permitted to estimate the five acidic dissociation constants and the Stokes radii at different protonation stages of the macrocyclic dodecapeptide. The pK(a) values were 3.6 and 4.4 for the two carboxylic groups of the lateral chains of D-Asp-11 and D-Glu-4, respectively, 6.4 for the aza-atom of the imidazole ring of His-10, 7.6 for the amino group of N-terminal Ile-1 and 9.7 for the delta-amino group of D-Orn-7, very close to the values obtained by other researchers by titration experiments. In agreement with a rigid macrocyclic structure the Stokes radii of different protonated forms ranged only between 14.3 and 14.8 A. Best fitting procedures performed on experimental mobility measured at two different pH values (5.50 and 6.72) in the presence of increasing Zn(+2) concentration allowed confirming the model that assumes the binding of Zn(+2) to P(0) peptide form with a 1.5 x 10(3) M(-1) intrinsic association constant. Following to Zn(+2) binding, the pK(a) of the amino group of N-terminal Ile-1 is shifted from 7.6 to 5.9 and the Stokes radius is reduced of about 3 A. The mean charge of the bacitracin A(1)-Zn(+2) complex resulted +1.67 and +1.12 at pH 5.50 and 6.72, respectively. These results suggest that the amino group of N-terminal Ile-1 is not essential for Zn(+2) binding.     

MS/MS in structural analysis of an oviposition-deterring pheromone

A recently characterized oviposition-deterring pheromone (ODP, structure 1) of the European cherry fruit fly was used as a test case for probing the potential of tandem mass spectrometry (MS/MS) in structure elucidation as a stand-alone technique. The glycolipid-taurinate 1 was subjected to MS/MS analyses under a variety of conditions with and without preceding chemical degradation. Acidic methanolysis of 1 and subsequent in-batch derivatization (trideuterioacetylation) yielded methyl 2,3,4,6-tetrakis-O-trideuterioacetyl-glucopyranoside (2), methyl 8,15-bis-trideuterioacetoxy-palmitate (3), and taurine (4) as suitable target compounds for direct mixture analysis.Low energy collision induced dissociation (CID) on selected precursor ions (MS/MS on [M + H – CH₃OH]⁺ and [M + H]⁺ produced by fast atom bombardment (FAB)) allowed direct identification of 2 and 4, respectively, by comparison with appropriate reference ions. In the case of 3, low energy CID (desorption chemical ionization (DCI) instead of FAB, MS/MS on [M + H]⁺) permitted deduction of gross molecular structure, but failed to provide positional detail. In sharp contrast,high energy CID of trideuterioacetylated intact 1 (FAB-MS/MS on [M – H]^– ions of la) clearly revealed a linear 8,15-hydroxylated palmitic acid backbone. Less certain was assignment of 15-O-glucosylation by this approach.     

Photochemical reactions. 146th communication. Photochemistry of conjugated methano-epoxydienes: Participation of the neighboring cyclopropane ring in product formation via carbonyl ylide and carbene intermediates

On singlet excitation (λ = 254 nm, THF, pentane or hexane), the diastereoisomeric methano-epoxydienes (E)- 6 and (E)- 7 undergo interconversion and yield the products 8 – 11 . The main process is the cleavage of the oxirane ring to the vinyl carbene intermediate e which undergoes addition to the adjacent double bond furnishing the cyclopropene 8 . The alternative carbene intermediate f is evidenced by the formation of the cyclobutene 10 . For the fragmentation leading to 11 , the carbene f as well as the dipolar species h are considered as possible intermediates. On triplet sensitization (acetone, λ > 280 nm), (E)- 7 shows behavior typical of epoxydienes, undergoing fission of the C? O bond of the oxirane ring and isomerization to the compounds 13 , 14 and (E/Z)- 15 .     

Kalorimetrische untersuchung von binären legierungen des platins und palladiums mit gallium,indium und thallium

Employing tin and lead solution calorimetry, the formation enthalpies of those phases having platinum and palladium as major component have been determined in the PdGa, PdIn, PdTl, PtGa und PtIn systems. These enthalpies are highly exothermic and suggest strong atomic interaction betweens palladium and platinum on the one hand and the third subgroup elements on the other. The experimental values have been compared with those obtained from the Miedema model. The thermodynamic data are discussed and related to the crystal structures found with these alloys.