Targeted phase II metabolites profiling as new screening strategy to investigate natural steroid abuse in animal breeding

The use of steroid hormones as growth promoters in cattle is banned within the European Union since 1988 but can still be fraudulently employed in animal breeding farms for anabolic purposes. While efficient targeted confirmatory methods have been implemented in control laboratories for many years, fast and reliable screening methods are still required, especially in the case of natural hormones abuse, but more globally for new "fishing" strategies allowing to reveal the use of even unknown anabolic agents. The development of focused profiling or untargeted metabolomic approaches is thus emerging in this context. The present study was a focused profiling study using steroids phase II metabolites, with the aim to get a better understanding of the steroid metabolism disruptions after exogenous administration of androstenedione and finally reveal potential biomarkers signing its administration. A sample preparation procedure was first developed, based on a separation of 31 glucuronide and sulphate conjugate compounds using an anion exchange SPE system. Each fraction was then analysed by UPLC-MS/MS in MRM mode showing a rapid (between 4h and 4 days after treatment) and huge excretion of several direct metabolites of androstenedione such as etiocholanolone-glucuronide or epiandrosterone-sulphate.     

A Fluorogenic Probe for Cell Surface Phosphatidylserine Using an Intramolecular Indicator Displacement Sensing Mechanism

The detection of externalized phosphatidylserine (PS) on the cell surface is commonly used to distinguish between living, apoptotic, and necrotic cells. The tools of choice for many researchers to study apoptosis are annexin V‐fluorophore conjugates. However, the use of this 35 kDa protein is associated with several drawbacks, including temperature sensitivity, Ca²⁺ dependence, and slow binding kinetics. Herein, a fluorogenic probe for cell surface PS, P‐IID , is described, which operates by an intramolecular indicator displacement (IID) mechanism. An intramolecularly bound coumarin indicator is released in the presence of cell surface PS, leading to a fluorescence “turn‐on” response. P‐IID demonstrates superior performance when compared to annexin V, for both fluorescence imaging and flow cytometry. This allows P‐IID to be used in time‐lapse imaging of apoptosis using confocal laser scanning microscopy and demonstrates the utility of the IID mechanism in live cells.     

A new accurate calorimetric method for the enthalpy of fusion measurements up to 1000 °C

A new metrological approach is proposed by the Laboratoire National de Metrologie et d’Essais to lower the uncertainty of measurements of enthalpy of fusion from 23 to 1000 °C. It consists, as in our previous works, in putting the studied sample inside a calibration crucible and in performing the heat calibration of the calorimeter by electrical substitution at two temperatures before and after the temperature of fusion of the sample during the same low-rate heating run. The novelty lies in the “electrical compensation” of the endothermic reaction of fusion. The quantification of the electrical energy needed to melt the sample, which can be measured with high accuracy, and the integrated remaining heat flow rate divided by the calibration factor (sensitivity) of the calorimeter at the temperature of fusion, leads to the determination of the enthalpy of fusion of the sample with low uncertainty. This methodology reduces the influence of the uncertainty component associated with the area of the peak of fusion by comparison with the former procedure when no electrical compensation was applied. The relative expanded uncertainty (k = 2) associated with the enthalpy of fusion measurements, performed using this facility and this new procedure, has been assessed to be < 0.2% for tin and indium and to be about 0.3% in the case of silver.

     

Fast gas chromatography characterisation of purified semiochemicals from essential oils of Matricaria chamomilla L. (Asteraceae) and Nepeta cataria L. (Lamiaceae)

The chemical composition of Matricaria chamomilla L. and Nepeta cataria L. essential oils was determined by GC-MS on an apolar stationary phase by comparison of the characteristic fragmentation patterns with those of the Wiley 275L database. The GC-MS chromatograms were compared with those obtained by fast GC equipped with a direct resistively heated column (Ultra Fast Module 5% phenyl, 5 mx 0.1 mm, 0.1 microm film thickness). Analytical conditions were optimised to reach a good peak resolution (split ratio=1:100), with analysis time lower than 5 min versus 35-45 min required by conventional GC-MS. The fast chromatographic method was completely validated for the analysis of mono- and sesquiterpene compounds. Essential oils were then fractionated by column chromatography packed with silica gel. Three main fractions with high degree of purity in E-beta-farnesene were isolated from the oil of M. chamomilla. One fraction enriched in (Z,E)-nepetalactone and one enriched in beta-caryophyllene were obtained from the oil of N. cataria. These semiochemical compounds could act as attractants of aphid's predators and parasitoids.     

Development of a novel high volume band compression injector for the analysis of complex samples like toxaphene pesticide

A new type of injector has been developed for gas chromatographic analysis. The injector has high volume and band compression (HVBC) capabilities useful for the analysis of complex samples. The injector consists essentially of a packed liner operated at room temperature while a narrow heated zone is used to axially scan the liner selectively desorbing the compounds of interest. The scanning speed, distance and temperature of the zone are precisely controlled. The liner is connected to an interface which can vent the solvent or any undesirable compounds, and transfer the analytes to an analytical column for separation and quantification. The injector is designed to be compatible with injection volumes from 1 to more than 250microL. At a low sample volume of 1microL, the injector has competitive performances compared to those of the "on-column" and "split/splitless" injectors for the fatty acid methyl esters and toxaphene compounds tested. For higher volumes, the system produces a linear response according to the injected volume. In this explorative study, the maximum volume injected seems to be limited by the saturation of the chromatographic system instead of being defined by the design of the injector. The HVBC injector can also be used to conduct "in situ" pretreatment of the sample before its transfer to the analytical column. For instance, a toxaphene sample was successively fractionated, using the HVBC injector, in six sub-fractions characterized by simpler chromatograms than the chromatogram of the original mixture. Finally, the ability of the HVBC injector to "freeze" the separation in time allowing the analyst to complete the analysis at a later time is also discussed.     

Are Allenes with Zwitterionic Character Still Allenes? Of Course!

The true ground state of 1 is a matter of debate, but for clarity and convenience the allene resonance form 1 a , is the most appropriate. The arguments for aromaticity made by Christl and Engels are shown to be incorrect.

     

A C‐linked Glycomimetic in the Gas Phase and in Solution: Synthesis and Conformation of the Disaccharide Manα(1,6)‐C‐ManαOPh

The effect of carbon is subtle but sweet : The flexible C‐linkage in the newly synthesised C‐glycosyl mimetic, Manα(1,6)‐C‐ManαOPh allows OH? π bonding, both in the gas phase and in aqueous solution. This interaction is absent in the O‐linked disaccharide (see figure).

     

Synthesis and characterization of epoxy functionalized cooligomers based on chlorotrifluoroethylene and allyl glycidyl ether

The synthesis of functionalized fluorocooligomers based on chlorotrifluoroethylene (CTFE) and allyl glycidyl ether (AGE) under radical copolymerization is presented. The compositions of comonomers in the cooligomers were determined by three different analyses viz: from ¹H and ¹⁹F NMR spectroscopy by using 1,3‐bis(trifluoromethyl) benzene as the external standard, epoxy equivalent weight value, and elemental analyses. The compositions determined by three methods were matching reasonably well and showed that the resulting poly(CTFE‐co‐AGE) cooligomers exhibit a tendency for alternation. The distribution of the monomers in the cooligomers was proposed based on the assessment of the reactivity ratios, r_i, of both comonomers. These values were determined from the kinetics of radical copolymerization of CTFE with AGE from Fineman‐Ross, Kelen‐Tudos, and extended Kelen‐Tudos methods which led to the assessment of the average reactivity ratios as: r_CTFE = 0.20 ± 0.03 and r_AGE = 0.15 ± 0.08 at 74 °C. The lower M_n values substantiated the formation of cooligomers rather than copolymers. The formation of cooligomers was attributed to the chain transfer to AGE (by hydrogen abstraction from AGE) from the allylic transfer. The poly(CTFE‐co‐AGE) cooligomers were soluble in most of the common organic polar solvents. An optimization of cooligomer yields was investigated by using ethyl vinyl ether as a third comonomer and from different initiators. The thermal stabilities of the cooligomers, obtained by thermal gravimetric analysis, showed a 5% weight loss at temperatures over 225 °C under air. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3587–3595, 2010     

Recent progress in homogeneous supported asymmetric catalysis: example of the BINAP and the BOX ligands

Industrial developments of asymmetric catalysis are slowed down by cost and toxicity of the soluble transition metal complexes which are used as catalysts. This problem could be solved by using homogeneous supported catalysis among other technologies. The article analyzes recent results obtained in the fields of catalysis using transition metal complexes grafted on organic or inorganic materials. Two types of ligand are considered: BINAP and BOX. In these two cases several approaches are still under investigations and some of them appear to give a higher performance, such as the polymer with ligand in the main chain and with rigid spacer in case of the BINAP and the ligand grafted on silica particles in the case of BOX.     

Oligonucleotide Analogues with Integrated Bases and Backbones. Part 23

The sulfone 2 , and the sulfoxides (S)‐ 3 and (R)‐ 3 were obtained by oxidation of the thiomethylene‐linked A*[s ]U dinucleoside 1 . Conformational analysis and association studies of 2 , (S)‐ 3 , and (R)‐ 3 reveal a strong influence of the configuration on the conformation of the linking unit and on the self‐association of the dinucleosides.