Étude de l?adhérence des joncs et des plats composite avec le béton par flexion (beam test)

The Near Surface Mounted (NSM) technique has been used in recent years for the strengthening of reinforced concrete beams. It involves the insertion of strips or rods of polymers reinforced with carbon fiber (CFRP) in the groove made previously in the concrete cover of corresponding surfaces, filled with epoxy adhesive for fixation. In order to characterize the bond behavior of the laminate and rods to concrete, an experimental work of pullout-bending tests was carried out. The pullout force at the laminate and the slip at the free and loaded end were measured. The influences of the concrete strength, the strength of the bond, and bond length on the bonding behavior between the three materials concrete, epoxy adhesive and CFRP were analyzed.     

Synthesis and Properties of Self‐doped Polyaniline with Polycationic Templates via Biocatalysis

The enzyme horseradish peroxidase (HRP) was used to polymerize acid‐functionalized anilines to make self‐doped polymer in the presence of a polycationic template. Anionic templates such as sulfonated polystyrene (SPS) could not function as a suitable template for the polymerization of acid‐functionalized aniline derivatives. Several types of polyelectrolytes were used as templates to observe the structural effects and doping behavior of polyaniline/template complexes. The synthesis is straightforward and the conditions are mild in that the polymerization of conducting polyanilines may be carried out in buffered solutions as high as pH 6, with a stoichiometric amount of hydrogen peroxide and catalytic amount of enzyme. The conductivity of these enzymatically synthesized self‐doped polymers was relatively high without additional doping due to the self‐doping of the acid moieties. The conductivity did not decrease dramatically at pH 3 as is the usual case of unsubstituted HCl‐doped polyaniline and maintained good conductivity even at pH 6. The measured conductivity at pH 4～pH 6 is around 10^?4 S/cm to 10^?6 S/cm.     

Assessment of dispersive liquid–liquid microextraction for the simultaneous extraction,preconcentration, and derivatization of Hg2+ and CH3Hg+ for further determination by GC–MS

This work reports the development of a dispersive liquid – liquid microextraction method for the simultaneous extraction, preconcentration, and derivatization of Hg²⁺ and CH₃Hg⁺ species from water samples for further determination by GC – MS. Some parameters of the proposed method, such as volume and type of disperser and extraction solvent, and Na[B(C₆H₅)₄] concentration were investigated using response surface methodology. Suitable recoveries were obtained using 80 μL C₂Cl₄ (as extraction solvent), 1000 μL ethanol (as disperser solvent), and 300 μL 2.1 mmol/L Na[B(C₆H₅)₄] (as derivatizing agent). Accuracy was evaluated in terms of recovery and ranged from 87 to 99% with RSD values <7%. In addition, a certified reference material of water (NIST 1641d) was analyzed and agreed with the certified value about 107% (for Hg²⁺), with RSD values <8.5%. LODs were 0.3 and 0.2 μg/L, with enrichment factors of 112 and 115 for Hg²⁺ and CH₃Hg⁺, respectively. The optimized method was applied for the determination of Hg²⁺ and CH₃Hg⁺ in tap, well, and lake water samples.     

Synthesis of 3-methyl-7-[2-(dimethylaminoethyl)oximino]-5-arylcyclopenta [F] Benzoxazolinones,Potential Ligands of the 5HT1D Receptors

The synthesis of 3-methyl-7-[2-(dimethylaminoethyl)oximino]-5-arylcyclopenta [f] benzoxa-zolinones, potential ligands of the 5HT_1D receptors is described through a 4 steps reaction strategy from 3-methyl-6-acetyl benzoxazolinone.     

Anti-inflammatory and Antinociceptive Activity of Chitin-binding Lectin from Canna Limbata Seeds

Lectins are a structurally heterogeneous group of proteins or glycoproteins with at least one noncatalytic domain binding reversibly to a specific mono- or oligosaccharide. Monocot mannose-binding lectins are an extended superfamily of structurally and evolutionarily related proteins. In this study, we evaluated anti-inflammatory and antinociceptive effects of monocot lectin from the Canna limbata seeds (CLL). To accomplish this, CLL was purified and subjected to pharmacological assays: abdominal writhing induced by acetic acid, formalin, hot plate and Zymosan A-induced peritonitis tests. The CLL was purified by chromatographic chitin column, and the relative mass of 21 kDa observed in electrophoresis was confirmed by electrospray mass spectrometry, which also revealed that purified CLL consists of a dimer having a weight of 49,676 Da. The CLL showed nociceptive activity in the acetic acid test as well as peripheral antinociceptive response. The CLL also showed anti-inflammatory effect with the reduction of inflammation in the formalin test and neutrophil migration into the peritoneal cavity. This is the first report of anti-inflammatory activity for a monocot lectin, and it suggests a new pharmacological tool to understand inflammatory and antinociceptive processes mediated through lectins.     

Analytical Expressions of Thermodynamic and Transport Properties of the Martian Atmosphere in a Wide Temperature and Pressure Range

Calculation of thermodynamic and transport properties of CO₂/N₂/O₂/Ar system (Martian atmosphere) have been performed in a wide pressure (0.01–100 bar) and temperature range (50–50,000 K). A self-consistent approach for the thermodynamic properties and higher order approximation of the Chapman–Enskog method for the transport coefficients have been used. Debye–Hückel corrections have been included in the calculation of thermodynamic properties while collision integrals derived following a phenomenological approach and accounting also for resonant processes contributions have been used. Moreover, charge–charge interactions have been obtained by using a screened Coulomb potential. Calculated values have been fitted by closed forms ready to be inserted in fluid dynamic codes in order to simulate plasma conditions for different technological applications. Comparison with data present in literature is also reported.     

Reversible Control over Molecular Recognition in Surface‐Bound Photoswitchable Hydrogen‐Bonding Receptors: Towards Read–Write–Erase Molecular Printboards

The synthesis of an anthracene‐bearing photoactive barbituric acid receptor and its subsequent grafting onto azide‐terminated alkanethiol/Au self‐assembled monolayers by using an Cu^I‐catalyzed azide–alkyne reaction is reported. Monolayer characterization using contact‐angle measurements, electrochemistry, and spectroscopic ellipsometry indicate that the monolayer conversion is fast and complete. Irradiation of the receptor leads to photodimerization of the anthracenes, which induces the open‐to‐closed gating of the receptor by blocking access to the binding site. The process is thermally reversible, and polarization‐modulated IR reflection–absorption spectroscopy indicates that photochemical closure and thermal opening of the surface‐bound receptors occur in 70 and 100 % conversion, respectively. Affinity of the open and closed surface‐bound receptor was characterized by using force spectroscopy with a barbituric‐acid‐modified atomic force microscope tip.     

Unprecedented Electron‐Poor Octahedral Ta6 Clusters in a Solid‐State Compound: Synthesis,Characterisations and Theoretical Investigations of Cs2BaTa6Br15O3

The crystal structure of Cs₂BaTa₆Br₁₅O₃ has been elucidated by using synchrotron X‐ray powder diffraction and absorption experiments. It is built from edge‐bridged octahedral [(Ta₆${{\rm Br}{{{\rm i}\hfill \atop 9\hfill}}}$ ${{\rm O}{{{\rm i}\hfill \atop 3\hfill}}}$ )${{\rm Br}{{{\rm a}\hfill \atop 6\hfill}}}$ ]^4? cluster units with a singular poor metallic electron (ME) count equal to thirteen. This leads to a paramagnetic behaviour related to one unpaired electron. The arrangement of the Ta₆ clusters is similar to that of Cs₂LaTa₆Br₁₅O₃ exhibiting 14‐MEs per [(Ta₆${{\rm Br}{{{\rm i}\hfill \atop 9\hfill}}}$ ${{\rm O}{{{\rm i}\hfill \atop 3\hfill}}}$ )${{\rm Br}{{{\rm a}\hfill \atop 6\hfill}}}$ ]^5? motif. The poorer electron‐count cluster presents longer metal–metal distances as foreseen according to the electronic structure of edge‐bridged hexanuclear cluster. Density functional theory (DFT) calculations on molecular models were used to rationalise the structural properties of 13‐ and 14‐ME clusters. Periodic DFT calculations demonstrate that the electronic structure of these solid‐state compounds is related to those of the discrete octahedral units. Oxygen–barium interactions seem to prevent the geometry of the octahedral cluster to strongly distort, allowing stabilisation of this unprecedented electron‐poor Ta₆ cluster in the solid state.     

Separation of natural antioxidants using PDMS electrophoresis microchips coupled with amperometric detection and reverse polarity

This report describes the use of PDMS ME coupled with amperometric detection for rapid separation of ascorbic, gallic , ferulic, p‐coumaric acids using reverse polarity. ME devices were fabricated in PDMS by soft lithography and detection was accomplished using an integrated carbon fiber working electrode aligned in the end‐channel configuration. Separation and detection parameters were investigated and the best conditions were obtained using a run buffer consisting of 5 mM phosphate buffer (pH 6.9) and a detection voltage of 1.0 V versus Ag/AgCl reference electrode. All compounds were separated within 70 s using gated injection mode with baseline resolution and separation efficiencies between 1200 and 9000 plates. Calibration curves exhibited good linearity and the LODs achieved ranged from 1.7 to 9.7 μM. The precision for migration time and peak height provided maximum values of 4% for the intrachip studies. Lastly, the analytical method was successfully applied for the analysis of ascorbic and gallic acids in commercial beverage samples. The results achieved using ME coupled with amperometric detection were in good agreement with the values provided by the supplier. Based on the data reported here, the proposed method shows suitability to be applied for the routine analysis of beverage samples.