Multianalytical Study of Patina Formed on Archaeological Metal Objects from Bliesbruck-Reinheim

 Patinas naturally formed on archaeological bronze alloys were characterized using light microscopy (LM), micro energy dispersive X-ray fluorescence analysis (μ-EDXRF), time of flight secondary ion mass spectrometry (TOF-SIMS) and scanning electron microscopy in combination with energy dispersive X-ray microanalysis (SEM/EDX). The examinations carried out on cross-sections of samples have shown that in all samples the copper content in the corrosion layer is lower than in the bulk, while an increase of tin and lead could be observed. Two different types of corrosion were found: first type, a corrosion formation leading to a three layer structure was observed on lead bronze. The outer layer consists mainly of Cu(II) compounds and soil material, followed by a fragmented layer of cuprous oxide and the surface layer of the alloy, where a depletion of copper and an enrichment of tin and high amounts of Cl could be detected. The second type of corrosion is characterized by a two layer structure on the tin bronze sample consisting of an outer layer with copper containing corrosion products and a layer with cracks, which reveals a depletion of copper whereas tin and lead are enriched. Also high amounts of Si were detected in this surface layer.     

On the regularity of the leafwise Poincaré metric

We prove that for a foliation of general type on a complex projective surface the curvature of the leafwise Poincaré metric is absolutely continuous.     

Aristolochene synthase: mechanistic analysis of active site residues by site-directed mutagenesis

Incubation of farnesyl diphosphate (1) with Penicillium roqueforti aristolochene synthase yielded (+)-aristolochene (4), accompanied by minor quantities of the proposed intermediate (S)-(-)germacrene A (2) and the side-product (-)-valencene (5) in a 94:4:2 ratio. By contrast, the closely related aristolochene synthase from Aspergillus terreus cyclized farnesyl diphosphate only to (+)-aristolochene (4). Site-directed mutagenesis of amino acid residues in two highly conserved Mg(2+)-binding domains led in most cases to reductions in both k(cat) and k(cat)/K(m) as well as increases in the proportion of (S)-(-)germacrene A (2), with the E252Q mutant of the P. roqueforti aristolochene synthase producing only (-)-2. The P. roqueforti D115N, N244L, and S248A/E252D mutants were inactive, as was the A. terreus mutant E227Q. The P. roqueforti mutant Y92F displayed a 100-fold reduction in k(cat) that was offset by a 50-fold decrease in K(m), resulting in a relatively minor 2-fold decrease in catalytic efficiency, k(cat)/K(m). The finding that Y92F produced (+)-aristolochene (4) as 81% of the product, accompanied by 7% 5 and 12% 2, rules out Tyr-92 as the active site Lewis acid that is responsible for protonation of the germacrene A intermediate in the formation of aristolochene (4).     

Abelian <Emphasis Type="Italic">ℓ</Emphasis>-Groups with Strong Unit and Perfect MV-Algebras

We investigate the class of abelian ℓ-groups with strong unit corresponding to perfect MV-algebras via the Γ functor, showing that this is a universal subclass of the class of all abelian ℓ-groups with strong unit and describing the formulas that axiomatize it. We further describe results for classes of abelian ℓ-groups with strong unit corresponding to local MV-algebras with finite rank.     

A Global Stability Theorem for Transversely Holomorphic Foliations

We prove a global stability theorem for transversely holomorphic foliations of complex codimension one: if there exists a compact leaf with finite holonomy, then the foliation is a Seifert fibration (that is, every leaf is compact and has finite holonomy).     

Sarcosine as a marker in prostate cancer progression: a rapid and simple method for its quantification in human urine by solid-phase microextraction–gas chromatography–triple quadrupole mass spectrometry

Sarcosine is an amino acid derivative of N-methylglycine and is involved in the amino acid metabolism and methylation processes that are enriched during prostate cancer progression. It could also serve as a new target to be measured during therapeutic interventions and help in the identification of aggressive tumors for radical treatment. In this study, we present a new urine test that can help early diagnosis of prostate cancer. The method for the quantification of sarcosine in urine consists of a solid-phase microextraction (SPME) step followed by gas chromatography–triple quadrupole mass spectrometry analysis. We used a preliminary derivatization step with ethyl chloroformate/ethanol and the corresponding ester was then extracted by SPME in immersion mode. Several fibers were evaluated and the optimization of the parameters affecting the SPME process was carried out using an experimental design. The optimal values were 20 min extraction time, 10% NaCl, and 270°C using a divinylbenzene/Carboxen/polydimethylsiloxane fiber. The triple quadrupole analyzer acquired data in selected reaction monitoring mode, allowing us to obtain reconstructed chromatograms with well-defined chromatographic peaks. The accuracy and precision of this method were evaluated at concentrations of 70, 250, and 800 ng/ml and were found to be acceptable. Very satisfactory values (0.10 and 0.16 ng/ml, respectively) were also achieved for the limit of detection and the limit of quantification. The proposed protocol represents a rapid, simple, selective, and sensitive tool to quantify sarcosine in urine samples for prostate cancer diagnosis and for a screening test.     

Post-irradiation oxidation of different polyethylenes

The radiation-induced oxidative degradation of polyethylenes (PEs) with different degrees of crystallinity was characterized after electron-beam irradiation and during storage at room temperature.UHMWPE, HDPE, LDPE, LLDPE and an ethylene-octene copolymer (Engage) were e-beam irradiated to 30 or 60 kGy in vacuum or in air and stored at room temperature in air. EPR spectroscopy was used to investigate macro-radicals produced during irradiation and their post-irradiation changes. FTIR spectroscopy was used to monitor changes in the polymer structure, induced by irradiation, and to follow post-irradiation oxidation.We found that the crystallinity and the size of the crystalline lamellae, in particular, play a major role on the post-irradiation effects. The low-crystallinity polyethylenes showed no oxidation or oxidation only to a small extent, even when irradiated and stored in air. On the contrary, development of post-irradiation oxidation was observed in HDPE and UHMWPE. We attribute these results to a different reactivity of the macro-alkyl radicals formed upon irradiation in the amorphous or in the crystalline phase. While the radicals formed in the amorphous phase decay in short time, the migration time of the radicals trapped in the crystalline phase to the amorphous one is a key factor, governing the oxidation process.     

A palladium iodide-catalyzed carbonylative approach to functionalized pyrrole derivatives

A novel and convenient approach to functionalized pyrroles is presented, based on Pd-catalyzed oxidative heterocyclization-alkoxycarbonylation of readily available N-Boc-1-amino-3-yn-2-ols. Reactions were carried out in alcoholic solvents at 80-100 °C and under 20 atm (at 25 °C) of a 4:1 mixture of CO-air, in the presence of the PdI(2)-KI catalytic system (2-5 mol % of PdI(2), KI/PdI(2) molar ratio = 10). In the case of N-Boc-1-amino-3-yn-2-ols 3, bearing alkyl or aryl substituents, the carbonylation reaction led to a mixture of Boc-protected and N-unsubstituted pyrrole-3-carboxylic esters 4 and 5, respectively. This mixture could be conveniently and quantitatively converted into deprotected pyrrole-3-carboxylic esters 5 by a simple basic treatment. In the case of diastereomeric (3RS,4RS)- and (3RS,4SR)-N-Boc-3-amino-2-methyldec-5-yn-4-ol (syn-3f and anti-3f, respectively, whose relative configuration was determined by X-ray crystallographic analysis), no particular difference was observed in the reactivity of the two diastereomers between them and with respect to the diastereomeric mixture (3S,4S) + (3S,4R). Interestingly, N-Boc-2-alkynyl-1-amino-3-yn-2-ols 6, bearing an additional alkynyl substituent α to the hydroxyl group, spontaneously underwent N-deprotection under the reaction conditions and regioselective water addition to the alkynyl group at C-3 of the corresponding pyrrole-3-carboxylic ester derivative, thus directly affording highly functionalized pyrrole derivatives 7 in one step. In a similar manner, a novel functionalized dihydropyrrolizine derivative 9 was directly synthesized starting from (S)-7-(pyrrolidin-2-yl)trideca-5,8-diyn-7-ol 8.     

Improved T2* assessment in liver iron overload by magnetic resonance imaging

In the clinical MRI practice, it is common to assess liver iron overload by T2* multi-echo gradient-echo images. However, there is no full consensus about the best image analysis approach for the T2* measurements. The currently used methods involve manual drawing of a region of interest (ROI) within MR images of the liver. Evaluation of a representative liver T2* value is done by fitting an appropriate model to the signal decay within the ROIs vs. the echo time. The resulting T2* value may depend on both ROI placement and choice of the signal decay model. The aim of this study was to understand how the choice of the analysis methodology may affect the accuracy of T2* measurements. A software model of the iron overloaded liver was inferred from MR images acquired from 40 thalassemia major patients. Different image analysis methods were compared exploiting the developed software model. Moreover, a method for global semiautomatic T2* measurement involving the whole liver was developed. The global method included automatic segmentation of parenchyma by an adaptive fuzzy-clustering algorithm able to compensate for signal inhomogeneities. Global liver T2* value was evaluated using a pixel-wise technique and an optimized signal decay model. The global approach was compared with the ROI-based approach used in the clinical practice. For the ROI-based approach, the intra-observer and inter-observer coefficients of variation (CoVs) were 3.7% and 5.6%, respectively. For the global analysis, the CoVs for intra-observers and inter-observers reproducibility were 0.85% and 2.87%, respectively. The variability shown by the ROI-based approach was acceptable for use in the clinical practice; however, the developed global method increased the accuracy in T2* assessment and significantly reduced the operator dependence and sampling errors. This global approach could be useful in the clinical arena for patients with borderline liver iron overload and/or requiring follow-up studies.