Non-empirical CI potential curves for the ground and excited states of PH and its positive ion

A series of calculated potential curves is reported for the low lying valence and (selected) Rydberg states of the PH molecule by employing the multi-reference (single- and) double-excitation CI method. A large AO basis including f functions on phosphorous is chosen for this study and up to twenty main configurations are used to generate a given MRD-CI space in the accompanying theoretical treatment. Very good agreement is obtained between calculation and experiment for a variety of spectroscopic constants and a number of predictions for electronically excited states of PH are made for cases in which no comparable empirical data are yet available. The repulsive ⁵∑^- state is shown to be responsible for the predissociation of several states of the neutral system and is also thought to explain the failure to detect a number of low lying Rydberg states experimentally. Analogous calculations for the PH⁺ molecular ion have also been carried out and spectroscopic constants for this system are reported. In this case the ⁴Π state plays much the same role as the neutral ⁵∑^- species in bringing about predissociation in its electronic spectrum. Finally a comparison is made throughout between the results for PH and PH⁺ and a number of isovalent systems, especially NH and NH⁺ and also SiH.     

Semiclassical approximation for the specific heat of non-crystalline solids at intermediate temperatures

The origin of the broad maximum in the specific heat (c _P) of glassy systems in the c _P/T ³ representation, in correspondence with the boson peak, has been described from a semiclassical perspective. A new model, based in the Debye approximation, taking into account the anharmonic vibrations of correlated atoms, is proposed. The theoretical predictions are shown to be in good agreement with the experimental data obtained in several glass samples in the temperature range 2–80 K.     

Double-imprinted polymer based on cross-linked poly(vinylimidazole–trimethylolpropane trimethacrylate) in solid phase extraction for determination of lead from wastewater samples by UV–vis spectrophotometry

The monitoring of the heavy metal pollution in wastewater is increasingly becoming a crucial global issue since they tend to accumulate in food chains and can cause many biological abnormalities. In this work, it was developed a novel lead ion-imprinted polymer (IIP) using sodium dodecyl sulphate (SDS) as a second template to be used as adsorbent in solid phase extraction (SPE) for determination of lead from wastewater samples by UV–vis spectrophotometry. The polymer called IIP–SDS was synthesised by a double-imprinting process with lead (template) and SDS (template). IIP–SDS was characterised by infrared spectroscopy Fourier transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy. IIP–SDS showed good recovery for lead (around 82.0%), while the IIP (only lead as template) was 72.2% and non-IIP was 44.9%. Thus, the double-imprinting process for the preconcentration of Pb²⁺ proved to be a more adequate methodology than IIP with a single template. The optimised parameters of sample preparation were washing solvent (2.0 mL of tetrahydrofuran), type and volume of eluent (5 mL of 1 mol L^?1 hydrochloric acid), sample amount (30 mL of water spiked with 10.0 µg mL^?1), amount of IIP–SDS (400 mg) and sample pH (pH = 4.5). Linearity ranged from 10 to 125 µg L^?1 with r > 0.992. The limit of detection and quantification were 6.3 and 10 µg L^?1, respectively. The precision (relative standard deviation, %) and accuracy (relative error, %) were lower than 15%. Finally, IIP–SDS may be an alternative and effective adsorbent for SPE procedures in monitoring of wastewater samples.     

The AΠu state of : Electric properties, fine and hyperfine coupling constants, and magnetic moments (g-factors). A theoretical study

Several properties are calculated for A²Π_u of —the majority for the first time—including electric and magnetic moments, and fine/hyperfine structure (fs/hfs) parameters. The new results are compared with our previous ones for X² and B² of [P.J. Bruna, F. Grein, J. Mol. Spectrosc. 227 (2004) 67–80]. The electric quadrupole Θ and hexadecapole Φ moments, polarizability α, and hfs constants a, b, c, d, eQq₀, eQq₂ are evaluated at the density functional theory (DFT) level [B3LYP/aug-cc-pVQZ]. The fs constants (spin–orbit coupling A_Π, Λ-doubling p, q, spin-rotation γ_Π), and magnetic moments (g-factors) are obtained via 2nd-order sum-over-states expansions, using wavefunctions and matrix elements obtained with a multireference configuration interaction (MRDCI) method, and the Breit–Pauli Hamiltonian. At equilibrium, 2nd-order properties of A²Π_u are dominated by its coupling with B². For the A state, two independent components are reported for traceless tensor properties (multipoles Θ and Φ; hfs parameters c/d and q₀/q₂) and three for traced properties (polarizability α and g-factors), i.e., one more component than for axially symmetric Σ states. The currently available experimental data on — limited to A_Π, p, and q—are well reproduced by our theoretical results.     

Chemical immobilization of crosslinked polymeric ionic liquids on nitinol wires produces highly robust sorbent coatings for solid-phase microextraction

Super elastic nitinol (NiTi) wires were exploited as highly robust supports for three distinct crosslinked polymeric ionic liquid (PIL)-based coatings in solid-phase microextraction (SPME). The oxidation of NiTi wires in a boiling (30% w/w) H₂O₂ solution and subsequent derivatization in vinyltrimethoxysilane (VTMS) allowed for vinyl moieties to be appended to the surface of the support. UV-initiated on-fiber copolymerization of the vinyl-substituted NiTi support with monocationic ionic liquid (IL) monomers and dicationic IL crosslinkers produced a crosslinked PIL-based network that was covalently attached to the NiTi wire. This alteration alleviated receding of the coating from the support, which was observed for an analogous crosslinked PIL applied on unmodified NiTi wires. A series of demanding extraction conditions, including extreme pH, pre-exposure to pure organic solvents, and high temperatures, were applied to investigate the versatility and robustness of the fibers. Acceptable precision of the model analytes was obtained for all fibers under these conditions. Method validation by examining the relative recovery of a homologous group of phthalate esters (PAEs) was performed in drip-brewed coffee (maintained at 60 °C) by direct immersion SPME. Acceptable recoveries were obtained for most PAEs in the part-per-billion level, even in this exceedingly harsh and complex matrix.     

Evaluation of gamma irradiation effect on physico-chemical properties of a mixed beverage based in soy milk and grape juice

The effects of the main operation variables on the electrochemical oxidation of simulated tributyl phosphate (TBP) waste by a boron-doped diamond anode are individually studied. The optimum operating conditions are obtained as follows: 4 g L^?1 initial TBP concentration, 180 min degradation time, 40 mA cm^?2 current density, 0.5 mol L^?1 Na₂SO₄ as the supporting electrolyte, and unadjusted pH of the aqueous phase. Under such conditions, a chemical oxygen demand (COD) removal ratio of 82.3% is achieved, and the energy consumption is 26.16 kWh m^?3. A degradation mechanism of TBP is tentatively proposed.     

Microbiological control and antibacterial action of a propolis-containing mouthwash and control of dental plaque in humans

Propolis is a bee product with several biological properties. This study aimed at investigating a propolis-containing mouthwash, its organoleptic properties, microbial contamination and its antibacterial action in vitro. This mouthwash was assessed in vivo to control dental plaque in humans. The presence of microorganisms was analyzed and the minimum inhibitory concentration against Streptococcus mutans was determined. A comparative study was done in vivo using propolis, chlorhexidine, and propolis plus chlorhexidine in lower concentrations for 14 days. Dental plaque was analyzed by the Patient Hygiene Performance (PHP) index. The odontological product was yellow, cloudy, free of microbial contamination, and exerted an inhibitory action in vitro. Individuals who used a propolis-containing mouthwash for 14 consecutive days in combination or not to chlorhexidine showed a similar PHP index to chlorhexidine alone. The product exerted an antibacterial action in vitro and in vivo, exhibiting a positive action in the control of dental plaque.     

On Hardy, BMO and Lipschitz spaces of invariantly harmonic functions in the unit ball

The invariantly harmonic functions in the unit ball Bⁿ in Cⁿare those annihilated by the Bergman Laplacian . The Poisson-Szegökernel P(z,) solves the Dirichlet problem for : if f C(Sⁿ),the Poisson-Szegö transform of f, where d is the normalized Lebesgue measure on Sⁿ,is the unique invariantly harmonic function u in Bⁿ, continuousup to the boundary, such that u=f on Sⁿ. The Poisson-Szegötransform establishes, loosely speaking, a one-to-one correspondencebetween function theory in Sⁿ and invariantly harmonic functiontheory in Bⁿ. When n 2, it is natural to consider on Sⁿ functionspaces related to its natural non-isotropic metric, for theseare the spaces arising from complex analysis. In the paper,different characterizations of such spaces of smooth functionsare given in terms of their invariantly harmonic extensions,using maximal functions and area integrals, as in the correspondingEuclidean theory. Particular attention is given to characterizationin terms of purely radial or purely tangential derivatives.The smoothness is measured in two different scales: that ofSobolev spaces and that of Lipschitz spaces, including BMO andBesov spaces. 1991 Mathematics Subject Classification: 32A35,32A37, 32M15, 42B25.     

Crystal structure of the orthorhombic basic copper nitrate,Cu2(OH)3NO3

The crystal structure of the orthorhombic copper salt Cu₂(OH)₃NO₃ (natural gerhardtite) has been determined from X-ray diffractometer data by means of three-dimensional Patterson and Fourier syntheses, and refined by difference Fourier syntheses and least-squares methods to a finalR index of 0.097 for 532 reflections. Crystals of Cu₂(OH)₃NO₃ are orthorhombic:a=6.087(2),b=13.813(4),c=5.597(2) Å,Z=4, space groupP2₁2₁2₁. The Cu atoms form deformed hexagonal pseudocells (010). Each Cu(1) ion is surrounded by an approximately square planar arrangement of four OH ions at 1.929, 1.952, 1.993 and 1.998 Å and by two O (of NO₃ ions) at 2.359 and 2.480 Å, completing a deformed coordination octahedron; each Cu(2) ion is similarly coordinated by four OH at 1.989, 1.997, 2.009 and 2.018 Å, one OH at 2.309 Å, and one O at 2.384 Å. The structure involves layers of such deformed octahedra, of theC6-type, linked together by hydrogen bonds through the NO₃ ions. Similarities to and differences from the structure of the monoclinic polymorphous form are discussed.