A native, affinity-based protein blot for the analysis of streptavidin heterogeneity: consequences for the specificity of streptavidin mediated binding assays

Commercial preparations of streptavidin, a bacterial biotin-binding protein, were analyzed by isoelectric focusing combined with an affinity-based protein blot using biotinylated, protein-saturated nitrocellulose. The colorimetrical detection of streptavidin with biotinylated alkaline phosphatase allows the selective visualization of streptavidin molecules with at least two active biotin-binding sites. Dependent on the preparation, seven to sixteen streptavidin forms were found with isoelectric points ranging from 5 to 8. Molecular weight analysis of the subunits of streptavidin showed that the observed heterogeneity was mainly due to limited proteolysis, which does not destroy the biotin-binding activity. The preparations differed also in the nonspecific reactivity of streptavidin with single-stranded DNA, bovine serum albumin and Tween 20. No relationship was observed between heterogeneity and non-specific binding activity. Data obtained from protein blots onto nitrocellulose saturated with single-stranded DNA showed that it cannot be excluded that streptavidin with only a single active biotin-binding site is mainly responsible for the nonspecific reactivity of some streptavidin preparations.     

Determination of 4-methylbenzilidene camphor in sunscreen by square wave voltammetry in media of cationic surfactant

The voltammetric behavior of 4-methylbenzelidene camphor (MBC) was studied by square wave voltammetry (SWV) using mercury electrode. The experimental condition that provided the highest peak current with the best reduction signal definition of MBC was found in Britton-Robinson buffer and cationic surfactants, cetyltrimethylammoniun bromide (CTABr). A single peak of MBC reduction was observed at − 1.21 V versus Ag/AgCl. The developed methodology was applied for determination of MBC in commercial sunscreen SPF 15, 20 and 30 and for the simultaneous determination when other protection agents were associated, such as benzophenone-3 (BENZO) and octyl methoxycinammate (OMC). Both methodologies had shown good determination values for the analyzed samples. The calculated detection limit was 2.99 × 10^− 9 mol L^− 1 and the quantification limit was 9.98 × 10^− 9 mol L^− 1.     

A new sensor architecture based on carbon Printex 6L to the electrochemical determination of ranitidine

A glassy carbon electrode (GCE) modified with carbon Printex 6L (Printex6L/GCE) as a novel sensor is proposed. A morphological study was carried out using scanning electron microscopy, and an electrochemical characterization of the proposed electrode was performed by cyclic voltammetry (CV) using [Fe(CN)₆]^4? as a redox probe. With the incorporation of the carbon Printex 6L film onto the GCE surface, the [Fe(CN)₆]^4? analytical signal was substantially increased and the difference between the oxidation and reduction potentials (ΔE _p) decreased, a characteristic of the electrocatalytic effect. Furthermore, the use of carbon Printex 6L film resulted in an 84 % increase in the oxidation current and a 123 % increase in the reduction current. Faster charge transfer was observed at the proposed electrode/electrolyte interface during CV when compared with GCE. The Printex6L/GCE was tested for ranitidine (RNT) sensing and showed a decrease in the working potential and an increase in the analytical signal, when compared with GCE, again demonstrating an electrocatalytic effect. Under optimized experimental conditions, the developed square-wave adsorptive anodic stripping voltammetry (SWAdASV) method presented an analytical curve that was linear in RNT concentration range from 1.98 × 10^?6 to 2.88 × 10^?5 mol L^?1 with a detection limit of 2.44 × 10^?7 mol L^?1. The developed Printex6L/GCE was successfully applied to the determination of RNT concentrations in human body fluid samples (urine and serum).     

A model for selective ion adsorption including van der Waals interaction

A model for the selective adsorption phenomenon in an isotropic liquid accounting for a van der Waals interaction between the ions and the surface is presented, in the framework of the Poisson-Boltzmann theory. The fundamental equations governing the electric field distribution are exactly solved for low and high potential regimes.     

Controlling the size of poly(hydroxybutyrate-co-hydroxyvalerate) nanoparticles prepared by emulsification–diffusion technique using ethanol as surface agent

Poly(hydroxybutyrate-co-hydroxyvalerate) (PHBHV) nanospheres and oily nanocapsules were prepared by emulsification–diffusion technique. Controlled particle sizes were obtained employing binary mixtures of solvents (chloroform:ethanol) in the organic phase. Ethanol was chosen because of its dipole–dipole interaction with chloroform and its hydrogen bond with water. The smallest particles (from 253 to 493 nm) were obtained using a mixture of solvents composed of 70% ethanol and 30% chloroform (v/v) in the organic phase, while the largest particles (from 896 to 1568 nm) were obtained using chloroform exclusively. Independently of the organic phase composition, the nanoparticles showed unimodal distributions. Optical microscopy showed that the size of the primary emulsion droplets of the nanosphere formulations decreased with increasing ethanol concentrations in the organic phase. A simple empirical equation was developed correlating the nanoparticle diameters with the surface tension gradient coefficient multiplied by the ethanol molar concentration in the organic phase. The strategy showed that the control of the nanoparticle diameters, using emulsification–diffusion technique, could be achieved by adjusting the surface tension of the organic phase.     

Octupole-deformed molecular bands in 21Ne

Cluster states up to 12 MeV in the stable light nucleus ²¹Ne, based on the ¹⁶O + n + α molecular configurations, have been populated in the incomplete-fusion reaction ¹⁶ ₈O(⁷₃Li, np)²¹₁₀Ne at 29.4 MeV. The observation of both intra- and inter-band transitions leads to a re-interpretation of some levels in the K^π = ^- and K^π = ^- bands. The implications of this re-ordering on the octupole doublet bands are examined. The data allow a more accurate determination of some previously uncertain level energies. The “missing” I^π = ^- level is also discussed.     

Effect of the Presence of Surfactants and Immobilization Conditions on Catalysts’ Properties of <Emphasis Type="Italic">Rhizomucor miehei</Emphasis> Lipase onto Chitosan

Lipase from Rhizomucor miehei (RML) was immobilized onto chitosan support in the presence of some surfactants added at low levels using two different strategies. In the first approach, the enzyme was immobilized in the presence of surfactants on chitosan supports previously functionalized with glutaraldehyde. In the second one, after prior enzyme adsorption on chitosan beads in the presence of surfactants, the complex chitosan beads-enzyme was then cross-linked with glutaraldehyde. The effects of surfactant concentrations on the activities of free and immobilized RML were evaluated. Hexadecyltrimethylammonium bromide (CTAB) promoted an inhibition of enzyme activity while the nonionic surfactant Triton X-100 caused a slight increase in the catalytic activity of the free enzyme and the derivatives produced in both methods of immobilization. The best derivatives were achieved when the lipase was firstly adsorbed on chitosan beads at 4 °C for 1 h, 220 rpm followed by cross-link the complex chitosan beads-enzyme with glutaraldehyde 0.6% v.v^?1 at pH 7. The derivatives obtained under these conditions showed high catalytic activity and excellent thermal stability at 60° and 37 °C. The best derivative was also evaluated in the synthesis of two flavor esters namely methyl and ethyl butyrate. At non-optimized conditions, the maximum conversion yield for methyl butyrate was 89%, and for ethyl butyrate, the esterification yield was 92%. The results for both esterifications were similar to those obtained when the commercial enzyme Lipozyme® and free enzyme were used in the same reaction conditions and higher than the one achieved in the absence of the selected surfactant.     

Crystal and molecular structure of 3-mesityl-4-methyl-5-(3′-mesityl-5′-methyl-Δ2′-isoxazolin-4′-yl)-Δ2-isoxazoline,C26H32N2O2

The crystal structure of the title compound, C₂₆H₃₂N₂O₂, has been determined by three-dimensional X-ray diffraction methods. The crystals are monoclinic:P2₁/c,a=13.338(9),b=17.364(12),c=10.320(8) Å,=99.84(6)°,Z=4. The structure was solved by direct methods, and refined to anR value of 0.069 for 2258 observed reflections. Bond lengths and angles have normal values. The isoxazoline rings are in an envelope conformation and their best planes are twisted by 77.8°; the mesityl groups are inclined to the heterocyclic rings (63.3 and 69.0°). No significant conjugation is evident within the molecule.     

Conversion of a nitrosocarbonyl hetero Diels-Alder cycloadduct to useful isoxazoline-carbocyclic aminols

A new approach to useful precursors for the synthesis of isoxazoline-carbocyclic nucleosides is detailed, starting from the readily available N-benzoyl-2,3-oxazanorborn-5-ene and introducing more polar and hydrophilic functionalities through 1,3-dipolar cycloaddition of carbethoxyformonitrile oxide, generated either from the corresponding hydroximoyl chloride or, more conveniently, by catalyzed condensation with ethyl nitroacetate.