Investigation of gain and hyperfine splitting in the niobium X-ray laser

Neon-like niobium X-ray lasers have been studied using both slab and thin-foil target geometries. Niobium foils of various lengths were irradiated from both sides with two beams of the frequency-doubled Nova laser system using a line focus. We looked for gain by measuring spectrally integrated line intensities at different plasma lengths. Gain was observed in four neon-like niobium lines corresponding to 3s–3p transitions. The line profile of theJ = 0–1 line ( = 145.9 ) shows splitting due to the hyperfine effect. Improved contrast in the hyperfine structure is observed as the plasma length is increased. Hyperfine splitting may be relevant to other 3s–3p transitions in neon-like niobium as well as other neon-like X-ray laser systems.     

Interdiffusion studies in Bi-based layered systems with nanosecond laser pulses

Interdiffusion processes are induced by nanosecond laser pulses from an excimer laser. The Bi-based systems studied are formed by a Bi layer and a Sb or Ge layer. Configurations with Bi at the surface layer or at the innermost layer are both studied. Real-time reflectivity measurements are performed during the irradiation to determine the process kinetics and times and Rutherford backscattering spectrometry is used to obtain the concentration depth profiles. It will be shown that there is an interfacially initiated diffusion process in the Bi-Sb system and that the diffusion coefficients of this system within the liquid phase are in the 10^–5–10^–6 cm²/s range. The Bi-Ge system shows instead little mixing, the diffusion coefficients of the system within the liquid phase being at least two orders of magnitude lower. The differences observed when Bi is the surface layer or the innermost one are related to the different thermal responses of the system.     

The dilution of silica in a NiZnCo spinel ferrite matrix

Silica may dissolve up to about 0.05 wt% in an iron excess NiZnCo spinel matrix, affecting noticeably the magnetic properties at low and high values of the applied field. The initial permeability is reduced by about 50% with the addition of only 0.1 % SiO₂, while the coercivity almost triples, without noticeable changes in porosity or grain distribution. The vacancy and Fe²⁺ content of the sintered material also show a considerable change. The energy associated to the transformation Fe³⁺ Fe²⁺ for the samples without SiO₂ was found to be 0.41–0.42 eV, while for the samples with SiO₂ additions it decreased to 0.26 eV. The changes in magnetic properties are thought to be caused, more than because of the mentioned changes in ion distribution, by the stresses and defects created in the lattice due to the very small size of the Si⁴⁺ ion, which substitutes Fe³⁺ ions in tetrahedral sites. The transition Fe³⁺ Fe²⁺ seems to take place exclusively in the octahedral sites.