Reaction of α,β-unsaturated acid chlorides with β-diketones. Synthesis of 4,6,7,8-tetrahydro-2H-1-benzopyran-2,5(3H)-diones

Reaction of an α,β-unsaturated acid chloride with the anion of 5,5-dimethyl-1,3-cyclohexane-dione ( 2 ) gives either the enol ester ( 4 ) or a cyclized product ( 5 ), depending upon the reaction conditions. When the acid chloride is in excess, the ester is obtained. When the anion is in excess and the acid chloride is acryloyl or crotonyl, the cyclized product is obtained. A similar cyclized product ( 9 ) was formed from acryloyl chloride and an excess of the anion of 4-hydroxy-6-methyl-2-pyrone ( 8 ).     

EXCITATION ENERGY TRANSFER IN THE CRYPTOPHYTES. FLUORESCENCE EXCITATION SPECTRA AND PICOSECOND TIME-RESOLVED EMISSION SPECTRA OF INTACT ALGAE AT 77 K

Excitation spectra of chlorophyll- a (Chl- a ) fluorescence in intact cells of Cryptomonas ovata, Chroomonas pauciplastida and Chroomonas salina were determined at 77 K. For all species the excitation spectra for emission from Chl- a associated with photosystem II (PSII) showed increased contributions by a carotenoid (493 nm) and phycobiliproteins, and decreased contributions by carotenoid (417 nm, 505 nm) and Chl- a (445 nm) as compared to excitation spectra for emission from Chl- a associated with photosystem I (PSI). Excitation spectra of C. salina and C. ovata showed an increased contribution by Chl- c ² to PSII Chl- a fluorescence emission. In all three species the absorbance band positions of Chl- a , as determined from the excitation spectra, were similar to those previously described in green plants. green algae and phycobilisome-containing organisms. Time-resolved 77 K fluorescence emission spectra of C. ovata and C. salina showed successive emission from both phycoerythrin and Chl- c ², PSII Chl- a , and PSI Chl- a. C. pauciplastida showed successive emission from phycocyanin, PSII Chl- a , and PSI Chl- a. Spectral red-shifts with time were observed for the phycobiliprotein peaks in all three species. The fluorescence decay of phycoerythrin in C. ovata and C. salina was faster than that of phycocyanin in C. pauciplastida. The results are discussed in relation to the organization of the antenna pigments of PSII and PSI in the cryptophyte algae.     

Water adsorption, desorption, and clustering on FeO(111)

The adsorption of water on FeO(111) is investigated using temperature programmed desorption (TPD) and infrared reflection absorption spectroscopy (IRAS). Well-ordered 2 ML thick FeO(111) films are grown epitaxially on a Pt(111) substrate. Water adsorbs molecularly on FeO(111) and desorbs with a well resolved monolayer peak. IRAS measurements as a function of coverage are performed for water deposited at 30 and 135 K. For all coverages (0.2 ML and greater), the adsorbed water exhibits significant hydrogen bonding. Differences in IRAS spectra for water adsorbed at 30 and 135 K are subtle but suggest that water adsorbed at 135 K is well ordered. Monolayer nitrogen TPD spectra from water covered FeO(111) surfaces are used to investigate the clustering of the water as a function of deposition or annealing temperature. Temperature dependent water overlayer structures result from differences in water diffusion rates on bare FeO(111) and on water adsorbed on FeO(111). Features in the nitrogen TPD spectra allow the monolayer wetting and 2-dimensional (2D) ordering of water on FeO(111) to be followed. Voids in a partially disordered first water layer exist for water deposited below 120 K and ordered 2D islands are found when depositing water above 120 K.     

Light olefin production from CO/H2 over silica supported Fe/Mn/K catalysts derived from a bimetallic carbonyl anion, [Fe2Mn(CO)12]?

Fe/Mn/K catalysts derived from support of the anionic carbonyl, [Fe₂Mn(CO)₁₂]^– on silica were compared with catalysts prepared by aqueous impregnation methods, and found to be more selective for production of C₂–C₄ olefins. Addition of K had little effect, whereas variations in reaction conditions altered selectivity owing to secondary reactions of the alkene products.

---

Fe/Mn/K, , [Fe₂Mn(CO)₁₂]^–, , , , C₂–C₄. , , .

     

Reductive Amination of Aldehydes and Ketones with Sodium Triacetoxyborohydride. Studies on Direct and Indirect Reductive Amination Procedures(1)

Sodium triacetoxyborohydride is presented as a general reducing agent for the reductive amination of aldehydes and ketones. Procedures for using this mild and selective reagent have been developed for a wide variety of substrates. The scope of the reaction includes aliphatic acyclic and cyclic ketones, aliphatic and aromatic aldehydes, and primary and secondary amines including a variety of weakly basic and nonbasic amines. Limitations include reactions with aromatic and unsaturated ketones and some sterically hindered ketones and amines. 1,2-Dichloroethane (DCE) is the preferred reaction solvent, but reactions can also be carried out in tetrahydrofuran (THF) and occasionally in acetonitrile. Acetic acid may be used as catalyst with ketone reactions, but it is generally not needed with aldehydes. The procedure is carried out effectively in the presence of acid sensitive functional groups such as acetals and ketals; it can also be carried out in the presence of reducible functional groups such as C-C multiple bonds and cyano and nitro groups. Reactions are generally faster in DCE than in THF, and in both solvents, reactions are faster in the presence of AcOH. In comparison with other reductive amination procedures such as NaBH(3)CN/MeOH, borane-pyridine, and catalytic hydrogenation, NaBH(OAc)(3) gave consistently higher yields and fewer side products. In the reductive amination of some aldehydes with primary amines where dialkylation is a problem we adopted a stepwise procedure involving imine formation in MeOH followed by reduction with NaBH(4).     

High accuracy analysis by isotope dilution mass spectrometry using an iterative exact matching technique

The selection of an appropriate isotope dilution mass spectrometry technique for the practical application of this potentially primary method of analysis is highly important. The NARL approach for the application of the exact matching double isotope dilution mass spectrometry technique developed by Henrion is presented. NARL's approach utilises exact matching to minimise the effect of measurement biases within the method but also includes the thorough examination of all other biasing factors. The approach has been successfully tested in international CCQM intercomparisons with other national metrology institutes.     

Survey of ligand field parameters of strong field d complexes obtained from the g matrix

Using a newly proposed approach involving an internally consistent set of equations, the ligand field parameters Δ/ξ, V/ξ and k are obtained from literature values of the g matrix for strong field d⁵ systems of various conformations in which |Δ/ξ|≤10. Qualitative analysis of the observed results is done using the Angular Overlap Model, AOM.     

Ion trapping and its effect on the conductivity of LISICON and other solid electrolytes

Conductivity data for the lithium ion conducting solid electrolyte, LISICON, Li_2+2xZn_1?xGeO₄ over a particularly wide composition range, 0.15 < x < 0.85, and over the temperature range ～25 to 150°C show that both the activation energy and preexponential factor pass through maxima around x ～ 0.4 to 0.5, at which the preexponential factor exhibits anomalously high values, ～10¹³ ohm^?1 cm^?1 K. An explanation is offered which involves the trapping of mobile Li⁺ ions by the immobile sublattice at lower temperatures. This model also accounts for ageing effects observed at lower temperatures in which the conductivity decreases slowly with time. In the isostructural Li⁺ electrolytes, Li_3+xSi_xY_1?xO₄ (Y = P, As, V), the compositional dependence of both the preexponential factor and activation energy is less marked and no evidence for ion trapping effects is observed.     

Effect of glutaraldehyde on the activity of some DNA restriction endonucleases

The effect of the bifunctional crosslinking reagent glutaraldehyde on the activity of the restriction enzymes Bam HI,Hind III, EcoRI, and Tthlll I was investigated. The four enzymes exhibited differential sensitivity to inactivation. Tthlll I was the most sensitive, with activity losses occurring at levels of 0.0025% and above.Hind III was the most stable of the four and remained fully active at concentrations as high as 0.075%. Addition of BSA to incubation mixtures generally had a stabilizing effect. Implications of these results for the design of glutaraldehyde-based methods for the immobilization of restriction endonucleases are discussed.     

Structural changes of the gold-support interface during CO oxidation catalyzed by mononuclear gold complexes bonded to zeolite NaY: evidence from time-resolved X-ray absorption spectroscopy

Mononuclear gold complexes synthesized from AuIII(CH3)2(acac) in zeolite NaY were characterized by time-resolved X-ray absorption spectroscopy and infrared spectroscopy as they catalyzed CO oxidation at 298 K and 760 Torr in flow systems. Initial contact with a CO + O2 mixture led to the rapid formation of cationic gold complexes in which Au was bonded to approximately two zeolite O atoms, on average. Further contact with CO + O2 led to breaking of an Au-surface oxygen bond, giving a gold carbonyl anchored to approximately one O atom. The process was reversed in the absence of CO and O2.