Simultaneous light emission from a mixture of dendrimer encapsulated chromophores: a model for single-layer multichromophoric organic light-emitting diodes

The site isolation of two dyes capable of electronic interaction via Forster energy transfer has been studied with the two dyes coumarin 343 and pentathiophene encapsulated by dendrons containing both solubilizing and electroactive moieties. Photoluminescence studies of mixtures of the dendritic dyes show that at high dendron generation, significant site isolation is achieved with relative emission characteristics influenced by both the degree of site isolation and the emission quantum yield of the dyes. Electroluminescence studies carried out in organic light emitting diode devices confirm that color tuning may be achieved by mixing the two encapsulated dyes in a single layer. However, selective carrier trapping by one of the core component dyes can dramatically influence the effectiveness of other components in the device.     

Improved method for the determination of the major neutral steroids and unconjugated bile acids in human faeces using capillary gas chromatography

An improved method has been developed for the determination of the major neutral steroids (cholesterol and 5 beta-cholestan-3 beta-ol) and unconjugated bile acids (deoxycholic acid and lithocholic acid) in human faeces, using capillary gas chromatography with flame ionization detection. The freeze-dried faecal sample was subjected to a two-stage Soxhlet extraction followed by an aqueous alkali-organic solvent partition step to separate neutral steroids from bile acids. The neutral steroids were analysed as their trimethylsilyl ether derivatives on an OV-1 capillary column. The bile acids were further purified on a Sep-Pak C18 cartridge and then fractionated on a Sep-Pak SIL cartridge. Unconjugated bile acids were analysed as their methyl ester-trimethylsilyl ether derivatives also on an OV-1 capillary column. Quantitation of neutral steroids and unconjugated bile acids was achieved by reference to appropriate internal standards, added to the faecal extract immediately after the Soxhlet extraction stage. The method is being used in a study of the effect of diet on the metabolic activity of human gut flora.     

Conformational substates modulate hydride transfer in dihydrofolate reductase

In earlier studies of the hydride-transfer reaction catalyzed by dihydrofolate reductase (DHFR) we identified features of the protein correlated with variations in the reaction barrier. We extend the scope of those studies by carrying out potential of mean force (PMF) simulations to determine the hydride-transfer barrier in the wild-type protein as well as the G121V and G121S mutants. While our prior studies focused on the reactant state, our current work addresses the full reaction pathway and directly probes the reactive event. The free energy barriers and structural ensembles resulting from these PMF calculations exhibit the same trends reported in our previous work. Fluctuations present in these simulations also exhibit trends associated with differences in the hydride-transfer barrier height. Moreover, vibrational modes anticipated to promote hydride transfer exhibit larger amplitudes in simulations that generate lowered barriers. The results of our study indicate that discrete basins (substates) on a potential energy landscape of the enzyme give rise to distinct hydride-transfer barriers. We suggest that the long-range effects of mutations at position 121 within DHFR are mediated by differentially preorganized protein environments in the context of distinct substate distributions, with concomitant changes to the dynamic properties of the enzyme.     

Mass spectral study of ring E of taraxasterol and compounds with similar ring substitution

The origin of the [M–69]⁺ and [M–111]⁺ signals in the mass spectrum of taraxasterol was studied through the use of C(18), (19), (21), (22) and/or (30) deuteriated derivatives. The generality of these signals for ring systems with an exocyclic methylene group and a methyl moiety on an adjacent carbon was verified with 2-methylmethylenecyclohexane, 1-methyl-2-methylene-trans-decalin, 1,10-dimethyl-2-methylene-trans-decalin and some of their deuteriated derivatives. The most plausible mechanism for the formation of the [M–69]⁺ ion appears to involve cleavage of both bonds allylic to the exocyclic methylene group with a 1,3-hydrogen transfer from the adjacent ring. Genesis of the [M–111]⁺ ion is more complicated but a five-membered allylic ion generated from ring D is proposed.     

Electron spin echo envelope modulation from trapped electrons in a glassy medium

An amplitude modulation of the electron spin echo envelope has been observed for radiation-produced trapped electrons in 10 M NaOD/D₂O at 77°K but not in 10 M N₂OH/H₂O. The modulation has been simulated theoretically by generalizing the single crystal model of Rowan et al. to disordered systems. The modulation has been interpreted as due to dipolar interactions with deuterons in molecules of the second solvation shell around the trapped electrons.     

Synergism in binary mixtures of Thermobifida fusca cellulases Cel6B,Cel9A,and Cel5A on BMCC and Avicel

In an earlier binding study conducted in our laboratory using Thermobifida fusca cellulases Cel6B, Cel9A, and Cel5A (formally Thermomonospora fusca E₃, E₄, and E₅), it was observed that binding capacities for these three cellulases were 18–30 times higher on BMCC than on Avicel. These results stimulated an interest in how the difference in accessibility between the two cellulosic substrates would affect synergism observed with cellulase mixtures. To explore the impact of substrate, accessibility on the extent of conversion and synergism, three binary T. fusca cellulase mixtures were tested over a range of cellulase ratios and total molar cellulase concentrations on Avicel and BMCC. Higher extents of conversion were observed for BMCC due to the higher enzyme to substrate ratio resulting from the higher binding The processive endoglucanase, Cel9A, had four times the extent of conversion of the end endocellulase Cel5A, while the exocellulase Cel6B had three times the extent of conversion of Cel5A. Approximately 500 nmol/g of the cel9A+Cel6B mixture was needed to obtain 80% conversion, while the Cel6B+Cel5A and Cel9A+Cel5A mixtures required 1500 and 1250 nmol/g, respectively, to obtain 80% conversion. Thus, it appears that the more accessible structure of BMCC, as reflected by its binding capacity, results in relative higher processive activity.     

Flexible square supramolecular rings with hydrogen-bonded bushing in solid-state oxalurate complexes: versatility of the oxalurate ligand in covalent and noncovalent binding

Isotypic pseudooctahedral complexes of Co, Ni, and Cu with two chelating oxalurate ligands and two water molecules, trans-[M(oxalurate)(2)(H(2)O)(2)], have been synthesized and isolated by a novel progressive crystallization technique. Diffraction analyses reveal that the three complexes form isotypic solid-state structures in which the molecular connectivity and complex network of noncovalent interactions are qualitatively identical throughout the series. The oxalurate groups form unbounded chains through two different self-recognition patterns-a typical DA-AD motif and an unusual DDA'-A'DD form (D = hydrogen bond donor, A' = double acceptor). The unsymmetrical oxalurate group possesses the topological properties necessary to form aggregates of higher symmetry, and the "M(oxalurate)(2)" fragments form a rhombic 2-D motif with hydrogen-bonded corners and with hydrogen-bond acceptors directed to the inside of the cyclic aggregate. The 2-D net is stacked to form a channeled 3-D structure, in which the coordinated aqua ligands form the principal interlayer interactions. The slanted channels are occupied by the axial waters and by waters of crystallization, which are hydrogen bonded to the channel walls to form an ordered bushing. The extensive 3-D hydrogen-bonded superstructure is flexible enough to accommodate the distortion produced by the Jahn-Teller effect in the copper compound without requiring a qualitative structural change. The bonds affected by Jahn-Teller distortion in the Cu complex [Cu-O = 2.3788(15) A] are significantly longer than their analogues in the Co and Ni complexes [Co-O = 2.175(2), Ni-O = 2.094(9) A].     

Maleation of poly(3,4‐epoxy‐1‐butene) for accelerated crosslinking in the presence of a redox catalyst

Accelerated crosslinking of novel poly(3,4‐epoxy‐1‐butene) (3,4‐PEPB) oligomers in the presence of a cobalt‐based redox catalyst was investigated. Previous studies using model compounds, 3,4‐dimethoxy‐1‐butene and 1,4‐dimethoxy‐2‐butene, suggested that maleation of hydroxyl‐terminated 3,4‐PEPB oligomers would result in more rapid crosslinking in thin films. Novel maleated oligomers offered a unique combination of both electron‐rich and electron‐poor olefinic sites, and quantitative maleation significantly increased the crosslinking rate of 3,4‐PEPB. Efficient copolymerization between terminal maleate groups and olefinic groups in the repeating unit was proposed to account for accelerated crosslinking rates. Furthermore, the addition of novel reactive diluents, such as maleic acid mono‐ethyl ester, also effectively improved the 3,4‐PEPB crosslinking rate. Sol fraction measurements as a function of coating thickness revealed that the crosslinking rate versus oxygen diffusion was less significant for the maleated oligomers because of the presence of reactive electron‐poor olefins. Sol fractions were constant for catalyst concentrations greater than 0.25–0.50 wt % (as compared with oligomer feed). This observation suggested that a redox process was not a dominant factor in determining crosslinking rates at various experimental conditions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2789–2798, 2002     

Predicting the shape and structure of face-centered cubic gold nanocrystals smaller than 3 nm.

Although a number of computational studies have examined the relative stability of icosahedral and decahedral gold clusters from 1 to 3 nm in size, few studies have focussed on the variety of face-centered cubic (fcc) nanoparticles in this size regime. In most cases small fcc gold particles are assumed to adopt the truncated octahedral shape, but in light of the fact that the shape and structure of gold nanoparticles is known to vary, the relative stability of fcc polyhedra may change with size. Presented here are results of first-principles calculations investigating the preferred shape of gold particles less than 3 nm in size. Our results indicate that the equilibrium shape of fcc gold nanoparticles less than 1 nm is the cuboctahedron, but this shape rapidly becomes energetically unstable with respect to the truncated octahedron, octahedron and truncated cube shapes as the size increases.